From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <01ff01bff7d8$4b122460$1952df8d@SOYANG> From: "Hyun-Joon Cha" To: "Dan Malek" Cc: References: <01ba01bff79b$9ee78db0$1952df8d@SOYANG> <39804084.5EA8BA01@embeddededge.com> Subject: Re: Req. help about SCC2 and SCC3 as ethernet. Date: Thu, 27 Jul 2000 23:38:13 +0900 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: ----- Original Message ----- From: "Dan Malek" To: "Hyun-Joon Cha" Cc: Sent: Thursday, July 27, 2000 11:00 PM Subject: Re: Req. help about SCC2 and SCC3 as ethernet. > How do you know that is where it stops? We are currently using remote GDB with abatron BDI2000. In console_serial_write function, this function can't return any character.... > With SCC3, you are now > trying to configure Port B, which is also used for the SMC1 configuration. > Perhaps the console and kernel are working fine, and you just messed up > the I/O pins for SMC1. All pin assignments are correct, and during setting port B, we checked the pbpar,pbdir,pbodr also. nothing changed. > You will also need to make source code changes to enet.c, as it doesn't > have a standard set of instructions for configuring port B as Ethernet > control/data pins. We've changed all port configurations. > > > -- Dan > Do you have any code which enables SCC3 for ethernet on 850SAR? Thank you ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/