From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <021901c1d615$62ffe7c0$0202a8c0@ebrady.net>
From: "Ed Brady" <mailinglist@ebrady.net>
To: "Wolfgang Denk" <wd@denx.de>
Cc: <linuxppc-embedded@lists.linuxppc.org>
References: <20020327210215.3A202109F4@denx.denx.de>
Subject: Re: Compiling 2.4.18 for Motorola MBX board 
Date: Wed, 27 Mar 2002 23:59:48 -0500
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Sender: owner-linuxppc-embedded@lists.linuxppc.org
List-Id: <linuxppc-embedded@lists.linuxppc.org>


Wolfgang,

Thank you for the reply....

I was able to perform the following functions

make mbx_config
make oldconfig
make dep
make zImage

Using make zImage, the kernel itself would build, but I got the following
errors when attempting to link the original boot code.

-------
powerpc-eabi-objcopy -O elf32-powerpc \
        --add-section=.image=../images/vmlinux.gz \
        --set-section-flags=.image=contents,alloc,load,readonly,data \
        ../common/dummy.o image.o
powerpc-eabi-ld -T ../ld.script -Ttext 0x00180000 -Bstatic -o zvmlinux
head.o ../common/relocate.o  misc-embedded.o ../common/misc-common.o
../common/string.o ../common/util.o embed_config.o iic.o m8xx_tty.o image.o
../lib/zlib.a
image.o: In function `main':
image.o(.text+0xc): undefined reference to `__eabi'
make[2]: *** [zvmlinux] Error 1
make[2]: Leaving directory `/usr/src/ppc/linux/arch/ppc/boot/simple'
make[1]: *** [zImage] Error 2
make[1]: Leaving directory `/usr/src/ppc/linux/arch/ppc/boot'
make: *** [zImage] Error 2
-----

Could this error be related to an incorrectly built cross-compiler?   Using
some information that I found on the web, I build the ppc cross compiler, as
ppc-unknown-eabi,  which I interpret to mean ppc eabi on unknown O.S.
Should I have built the cross-compiler as ppc-linux-eabi?

I have not yet tried the 'make pImage' build yet, however I have noticed
that 'make pImage' command can not be performed at the Top Level directory
with the standard makefile.  In order to run it I have to export TOPDIR to
be the linux ppc source directory, and then CD to the arch/ppc/boot
directory first.  I will give more details on this once I have given it a
try.

Ed Brady



----- Original Message -----
From: "Wolfgang Denk" <wd@denx.de>
To: "Ed Brady" <mailinglist@ebrady.net>
Sent: Wednesday, March 27, 2002 4:02 PM
Subject: Re: Compiling 2.4.18 for Motorola MBX board


> Ed,
>
> in message <015601c1d5d0$b0278b60$64d4047e@research.liebert.com> you
wrote:
> >
> > I am trying to cross compile the latest 2.4.18 kernel to run on an MBX
board
> > (MPC 860).  However, I consistently run into problems whenever the final
> > link is performed.    See error text below....
>
> It seems your kernel configuration is broken. You better restart with
> the default configuration fro the  MBX  board;  check  that  this  is
> compiling fine, and then start modifying according to your needs:
>
> $ make mbx_config
> $ make oldconfig
> $ make dep
> $ make pImage # with PPCBoot firmware
> $ make zImage # with old bootstrap loader code
>
> If this works, you can start modifying the configuration
> using
>
> $ make menuconfig
>
> etc.
>
> Hope this helps,
>
> Wolfgang Denk
>
> --
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
> The trouble with our times is that the future is not what it used  to
> be.                                                     - Paul Valery
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/