From: Shrikanth Hegde <sshegde@linux.ibm.com>
To: Christophe Leroy <christophe.leroy@csgroup.eu>,
linuxppc-dev@lists.ozlabs.org
Cc: npiggin@gmail.com, maddy@linux.ibm.com, bigeasy@linutronix.de,
ankur.a.arora@oracle.com, linux-kernel@vger.kernel.org,
mark.rutland@arm.com, vschneid@redhat.com, peterz@infradead.org,
Michael Ellerman <mpe@ellerman.id.au>
Subject: Re: [PATCH 1/3] powerpc: copy preempt.h into arch/include/asm
Date: Mon, 2 Dec 2024 19:35:35 +0530 [thread overview]
Message-ID: <026ad776-a889-4213-8e0e-1da9065dc5ef@linux.ibm.com> (raw)
In-Reply-To: <b5c152a3-d459-4744-84ec-846153de1652@csgroup.eu>
On 11/27/24 12:07, Christophe Leroy wrote:
>
>
> Le 25/11/2024 à 05:22, Shrikanth Hegde a écrit :
>> PowerPC uses asm-generic preempt definitions as of now.
>> Copy that into arch/asm so that arch specific changes can be done.
>> This would help the next patch for enabling dynamic preemption.
>
The reason I want the content instead was to allow future patches where
I thought of making preempt count per paca for ppc64 atleast. generic
code assumes it is per thread. If this change is to be done at that
point, that is fair too. I am okay with it.
> Instead of copying all the content of asm-generic version, can you just
> create a receptacle for your new macros, that will include asm-generic/
> preempt.h ?
>
> Look at arch/powerpc/include/asm/percpu.h for exemple.
>
You mean something like below right?
#ifndef __ASM_POWERPC_PREEMPT_H
#define __ASM_POWERPC_PREEMPT_H
#include <asm-generic/preempt.h>
#if defined(CONFIG_PREEMPT_DYNAMIC) &&
defined(CONFIG_HAVE_PREEMPT_DYNAMIC_KEY)
DECLARE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
#endif
#endif /* __ASM_POWERPC_PREEMPT_H */
>>
>> No functional changes intended.
>>
>> Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
>> ---
>> arch/powerpc/include/asm/preempt.h | 100 +++++++++++++++++++++++++++++
>> 1 file changed, 100 insertions(+)
>> create mode 100644 arch/powerpc/include/asm/preempt.h
>>
>> diff --git a/arch/powerpc/include/asm/preempt.h b/arch/powerpc/
>> include/asm/preempt.h
>> new file mode 100644
>> index 000000000000..51f8f3881523
>> --- /dev/null
>> +++ b/arch/powerpc/include/asm/preempt.h
>> @@ -0,0 +1,100 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +#ifndef __ASM_PREEMPT_H
>> +#define __ASM_PREEMPT_H
>
> Should be __ASM_POWERPC_PREEMPT_H
thanks for catching this.
>
>> +
>> +#include <linux/thread_info.h>
>> +
>> +#define PREEMPT_ENABLED (0)
>> +
>> +static __always_inline int preempt_count(void)
>> +{
>> + return READ_ONCE(current_thread_info()->preempt_count);
>> +}
>> +
>> +static __always_inline volatile int *preempt_count_ptr(void)
>> +{
>> + return ¤t_thread_info()->preempt_count;
>> +}
>> +
>> +static __always_inline void preempt_count_set(int pc)
>> +{
>> + *preempt_count_ptr() = pc;
>> +}
>> +
>> +/*
>> + * must be macros to avoid header recursion hell
>> + */
>> +#define init_task_preempt_count(p) do { \
>> + task_thread_info(p)->preempt_count = FORK_PREEMPT_COUNT; \
>> +} while (0)
>> +
>> +#define init_idle_preempt_count(p, cpu) do { \
>> + task_thread_info(p)->preempt_count = PREEMPT_DISABLED; \
>> +} while (0)
>> +
>> +static __always_inline void set_preempt_need_resched(void)
>> +{
>> +}
>> +
>> +static __always_inline void clear_preempt_need_resched(void)
>> +{
>> +}
>> +
>> +static __always_inline bool test_preempt_need_resched(void)
>> +{
>> + return false;
>> +}
>> +
>> +/*
>> + * The various preempt_count add/sub methods
>> + */
>> +
>> +static __always_inline void __preempt_count_add(int val)
>> +{
>> + *preempt_count_ptr() += val;
>> +}
>> +
>> +static __always_inline void __preempt_count_sub(int val)
>> +{
>> + *preempt_count_ptr() -= val;
>> +}
>> +
>> +static __always_inline bool __preempt_count_dec_and_test(void)
>> +{
>> + /*
>> + * Because of load-store architectures cannot do per-cpu atomic
>> + * operations; we cannot use PREEMPT_NEED_RESCHED because it
>> might get
>> + * lost.
>> + */
>> + return !--*preempt_count_ptr() && tif_need_resched();
>> +}
>> +
>> +/*
>> + * Returns true when we need to resched and can (barring IRQ state).
>> + */
>> +static __always_inline bool should_resched(int preempt_offset)
>> +{
>> + return unlikely(preempt_count() == preempt_offset &&
>> + tif_need_resched());
>> +}
>> +
>> +#ifdef CONFIG_PREEMPTION
>> +extern asmlinkage void preempt_schedule(void);
>> +extern asmlinkage void preempt_schedule_notrace(void);
>> +
>> +#if defined(CONFIG_PREEMPT_DYNAMIC) &&
>> defined(CONFIG_HAVE_PREEMPT_DYNAMIC_KEY)
>> +
>> +void dynamic_preempt_schedule(void);
>> +void dynamic_preempt_schedule_notrace(void);
>> +#define __preempt_schedule() dynamic_preempt_schedule()
>> +#define __preempt_schedule_notrace()
>> dynamic_preempt_schedule_notrace()
>> +
>> +#else /* !CONFIG_PREEMPT_DYNAMIC || !CONFIG_HAVE_PREEMPT_DYNAMIC_KEY*/
>> +
>> +#define __preempt_schedule() preempt_schedule()
>> +#define __preempt_schedule_notrace() preempt_schedule_notrace()
>> +
>> +#endif /* CONFIG_PREEMPT_DYNAMIC && CONFIG_HAVE_PREEMPT_DYNAMIC_KEY*/
>> +#endif /* CONFIG_PREEMPTION */
>> +
>> +#endif /* __ASM_PREEMPT_H */
next prev parent reply other threads:[~2024-12-02 14:06 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-25 4:22 [PATCH 0/3] powerpc: Enable dynamic preemption Shrikanth Hegde
2024-11-25 4:22 ` [PATCH 1/3] powerpc: copy preempt.h into arch/include/asm Shrikanth Hegde
2024-11-26 10:49 ` Christophe Leroy
2024-11-27 6:37 ` Christophe Leroy
2024-12-02 14:05 ` Shrikanth Hegde [this message]
2024-12-02 18:17 ` Christophe Leroy
2024-12-03 14:00 ` Shrikanth Hegde
2024-12-03 19:47 ` Christophe Leroy
2024-11-25 4:22 ` [PATCH 2/3] powerpc: support dynamic preemption Shrikanth Hegde
2024-11-26 10:48 ` Christophe Leroy
2024-11-26 11:15 ` Shrikanth Hegde
2024-11-27 6:28 ` Christophe Leroy
2024-11-27 6:44 ` Christophe Leroy
2024-12-01 19:45 ` Shrikanth Hegde
2024-12-03 19:53 ` Christophe Leroy
2024-11-25 4:22 ` [PATCH 3/3] powerpc: print right preemption model in die Shrikanth Hegde
2024-12-04 6:44 ` Christophe Leroy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=026ad776-a889-4213-8e0e-1da9065dc5ef@linux.ibm.com \
--to=sshegde@linux.ibm.com \
--cc=ankur.a.arora@oracle.com \
--cc=bigeasy@linutronix.de \
--cc=christophe.leroy@csgroup.eu \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.ibm.com \
--cc=mark.rutland@arm.com \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=peterz@infradead.org \
--cc=vschneid@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).