linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Frank Smith" <smith@amirix.com>
To: <linuxppc-embedded@lists.linuxppc.org>
Cc: "Frank Smith" <smith@amirix.com>
Subject: FEC and ETH on EP860
Date: Fri, 11 Jul 2003 19:02:05 -0300	[thread overview]
Message-ID: <03Jul11.185300adt.7313@dragon.appliedmicro.ns.ca> (raw)


Hello,

Is anyone aware of any issues involving use of the FEC and ETH
at the same time on an Embedded Planet EP860 running Linux?

If I bring the board up with Planet Core thinking DefaultENET=FENET,
I can boot Linux, and both Ethernets work.  If I bring the board up
with DefaultENET=ENET, the ETH works, but the FEC doesn't.  The FEC
driver attaches OK, but when I go to send some traffic out the FEC,
I get ring buffer dumps because packets aren't being transmitted.
CONFIG_USE_MDIO is not set in my configuration.

I'm using a 2.4.18 kernel (design constraint).  I'm just beginning
to dig into the details of this problem so I don't have much more
in the way of specifics to report yet.  Has anybody encountered the
same problem?


Thanks,
-Frank.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

                 reply	other threads:[~2003-07-11 22:02 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=03Jul11.185300adt.7313@dragon.appliedmicro.ns.ca \
    --to=smith@amirix.com \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).