From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Frank Smith" To: Cc: "Frank Smith" Subject: FEC and ETH on EP860 Date: Fri, 11 Jul 2003 19:02:05 -0300 Message-Id: <03Jul11.185300adt.7313@dragon.appliedmicro.ns.ca> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hello, Is anyone aware of any issues involving use of the FEC and ETH at the same time on an Embedded Planet EP860 running Linux? If I bring the board up with Planet Core thinking DefaultENET=FENET, I can boot Linux, and both Ethernets work. If I bring the board up with DefaultENET=ENET, the ETH works, but the FEC doesn't. The FEC driver attaches OK, but when I go to send some traffic out the FEC, I get ring buffer dumps because packets aren't being transmitted. CONFIG_USE_MDIO is not set in my configuration. I'm using a 2.4.18 kernel (design constraint). I'm just beginning to dig into the details of this problem so I don't have much more in the way of specifics to report yet. Has anybody encountered the same problem? Thanks, -Frank. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/