From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ruedi.Hofer@ascom.ch Date: Mon, 31 Jan 2000 16:12:58 +0100 (CET) Subject: RomFS To: linuxppc-embedded@lists.linuxppc.org Cc: damm@kieraypc01.p.y.ki.era.ericsson.se Message-id: <0FP7006FSGXU3K@pmdf-it.hasler.ascom.ch> MIME-version: 1.0 Content-type: MULTIPART/MIXED; BOUNDARY="Boundary_(ID_wT3K7biElrlfYxFL8Tl3fA)" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: --Boundary_(ID_wT3K7biElrlfYxFL8Tl3fA) Content-type: TEXT/PLAIN Content-Transfer-Encoding: 7BIT Hi, My ADS board is happily running with a NFS mounted linux box. Now I have to put all the code into the flash memory to get a standalone solution. I'm using the 8xxrom Bootloader. In a file called config.h I can configure CONFIG_DISK_ROM. As far as I can see, the bootloader assumes then that a complete FAT filesystem is stored from the position 0xFE020000 in flash. My question: - Is my assumption right? - How can I produce a FAT filesystem in a file, which I can download with MPC8BUG into the onboard flash? - Does it have anything in common with the romfs driver which is supported by the kernel? (I think not) TIA, Ruedi --Boundary_(ID_wT3K7biElrlfYxFL8Tl3fA)-- ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/