From: Ruedi.Hofer@ascom.ch
To: linuxppc-embedded@lists.linuxppc.org
Cc: erammsu@kieraypc01.p.y.ki.era.ericsson.se,
kernel@linux01.hasler.ascom.ch
Subject: Re: PCMCIA support for 860
Date: Wed, 05 Apr 2000 17:21:20 +0100 (CED) [thread overview]
Message-ID: <0FSJ00F9FUON1E@pmdf-it.hasler.ascom.ch> (raw)
[-- Attachment #1: Type: TEXT/PLAIN, Size: 908 bytes --]
Hi
Thanx for all the support. I've added now Marcus' patchfiles.
Compiling works fine now.
Unfortunately, when I enable the IDE stuff in the kernel config
(Block devices -> Enhanced IDE support)
it won't boot anymore!
Why?
Is there something else necessary in the kernel config?
(As mentioned in the patch, I've disabled
MPC8xx CPM options -> Configure IDE driver for ATA on PCMCIA....
The kernel output:
entry 0x100000, phoff 0x34, shoff 0x829fc
phnum 0x1, shnum 0x9
p_offset 0x10000, p_vaddr 0x100000, p_paddr 0x100000
p_filesz 0x530c, p_memsz 0xb1cc
Loading at 0x10c000
Starting 0x11c000
loaded at: 0011C000 001271CC
relocated to: 00100000 0010B1CC
board data at: 01FF0000 01FF001C
relocated to: 0010C100 0010C11C
zimage at: 00122000 0018E9C0
avail ram: 0018F000 02000000
Linux/PPC load:
Uncompressing Linux...done.
Now booting the kernel
<crash><crash><crash><crash><crash>
Ruedi
next reply other threads:[~2000-04-05 16:21 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-04-05 16:21 Ruedi.Hofer [this message]
2000-04-06 9:07 ` PCMCIA support for 860 Marcus Sundberg
-- strict thread matches above, loose matches on Subject: below --
2000-05-23 9:58 Shuangjun Zhu
2000-05-22 9:24 Shuangjun Zhu
2000-05-19 8:35 Shuangjun Zhu
2000-04-06 10:39 Ruedi.Hofer
2000-04-06 12:23 ` Marcus Sundberg
2000-04-04 11:52 Ruedi Hofer
2000-04-04 13:23 ` Marcus Sundberg
2000-04-04 9:49 Ruedi Hofer
2000-04-04 11:54 ` Marcus Sundberg
2000-04-04 23:33 ` Dan Malek
2000-04-03 7:55 Ruedi.Hofer
2000-04-03 17:01 ` Marcus Sundberg
2000-04-03 19:55 ` Dan Malek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0FSJ00F9FUON1E@pmdf-it.hasler.ascom.ch \
--to=ruedi.hofer@ascom.ch \
--cc=erammsu@kieraypc01.p.y.ki.era.ericsson.se \
--cc=kernel@linux01.hasler.ascom.ch \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).