From: Ruedi.Hofer@ascom.ch
To: linuxppc-embedded@lists.linuxppc.org
Cc: kernel@linux01.hasler.ascom.ch
Subject: SBC8260, kernel 2.4.0-test8, initrd
Date: Tue, 24 Oct 2000 16:27:32 +0100 (CED) [thread overview]
Message-ID: <0G2X009AGV5CS2@pmdf-it.hasler.ascom.ch> (raw)
[-- Attachment #1: Type: TEXT/PLAIN, Size: 2339 bytes --]
Hi,
I try to boot linux 2.4.0test8 on my sbc8260 with an initrd.
make zImage.initrd generates the appropriate file which I load
into my memory.
Unfortunately, I get the strange error below...
Any ideas???
\Ruedi
Starting at 0x400000...
CPU/CPM/BUS: 198/132/66 Mhz
Ethernet (in decimal): 0:160:30:1:4:5
loaded at: 00400000 0040B274
board data at: 00FFFFC0 00FFFFEC
relocated to: 00200100 0020012C
zimage at: 0040B274 00480312
initrd at: 00480312 00481408
avail ram: 00482000 01000000
Linux/PPC load:
Uncompressing Linux...done.
Now booting the kernel
Total memory = 16MB; using 0kB for hash table (at 00000000)
Linux version 2.4.0-test8 (root@linux01) (gcc version 2.95.2 19991030 (2.95.3 pr
erelease/franzo)) #27 Tue Oct 24 15:12:45 CEST 2000
Boot arguments: root=/dev/ram
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram
Warning: real time clock seems stuck!
Calibrating delay loop... 131.89 BogoMIPS
Memory: 14760k available (884k kernel code, 388k data, 52k init, 0k highmem)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
Starting kswapd v1.7
CPM UART driver version 0.01
ttyS00 at 0x0000 is a SMC
ttyS01 at 0x0040 is a SMC
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
eth0: SCC ENET Version 0.1, 00:a0:1e:01:04:05
eth1: FCC ENET Version 0.2, 00:a0:1e:41:04:05
fec: Phy @ 0x1, type 0x010fd04b
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 4194300k freed
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 10.1.20.2, my address is 10.1.20.1
ip_conntrack (128 buckets, 1024 max)
kmem_create: Forcing size word alignment - nfs_fh
Kernel panic: VFS: Unable to mount root fs on 01:00
Rebooting in 180 seconds..
next reply other threads:[~2000-10-24 15:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-10-24 15:27 Ruedi.Hofer [this message]
2000-10-24 16:37 ` SBC8260, kernel 2.4.0-test8, initrd Jerry Van Baren
2000-10-24 17:01 ` Dan Malek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0G2X009AGV5CS2@pmdf-it.hasler.ascom.ch \
--to=ruedi.hofer@ascom.ch \
--cc=kernel@linux01.hasler.ascom.ch \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).