From: Mirek23 <miroslaw.dach@psi.ch>
To: linuxppc-embedded@ozlabs.org
Subject: Re: zImage.elf loads but does not start
Date: Mon, 23 Apr 2007 08:12:00 -0700 (PDT) [thread overview]
Message-ID: <10142161.post@talk.nabble.com> (raw)
In-Reply-To: <10079346.post@talk.nabble.com>
I have revised the xparameters_ml403.h and the setup of the FPGA part. I have
found that the interrupt for the RS232 was not configured. Right now I was
able to come to the point when the kernel was uncompressed but it did not
start:
loaded at: 00400000 004F9138
board data at: 004F7120 004F7138
relocated to: 00404064 0040407C
zimage at: 00404DF1 004F6BBB
avail ram: 004FA000 04000000
Linux/PPC load: console=ttl0,9600 ip=129.129.129.29 root=/dev/ram rw
Uncompressing Linux...done.
Now booting the kernel
Does anybody has an idea what could be wrong?
Best Regards
Mirek
--
View this message in context: http://www.nabble.com/zImage.elf-loads-but-not-starts-tf3607582.html#a10142161
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
next prev parent reply other threads:[~2007-04-23 15:12 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-19 15:10 zImage.elf loads but not starts Mirek23
2007-04-23 15:12 ` Mirek23 [this message]
2007-04-23 16:11 ` zImage.elf loads but does not start Leonid
2007-04-24 16:55 ` Mirek23
2007-04-24 17:11 ` Andrei Konovalov
2007-05-04 15:04 ` Mirek23
2007-05-04 15:41 ` Andrei Konovalov
2007-05-08 9:46 ` Mirek23
2007-05-08 21:46 ` Leonid
2007-05-08 21:50 ` Adrian Craine
2007-05-09 15:02 ` Charles Krinke
2007-05-10 8:45 ` Mirek23
2007-05-10 16:05 ` Mead, Joseph
2007-05-11 11:21 ` Mirek23
2007-05-15 12:08 ` Mirek23
2007-05-15 12:29 ` Andrei Konovalov
2007-05-15 12:45 ` Miroslaw Dach
2007-05-15 18:07 ` Andrei Konovalov
2007-05-15 18:49 ` Miroslaw Dach
2007-05-18 12:43 ` Mirek23
2007-05-25 12:24 ` Mirek23
2007-05-25 13:16 ` Andrei Konovalov
2007-05-25 15:23 ` Mirek23
2007-05-25 16:56 ` Advice needed Charles Krinke
2007-05-15 13:12 ` zImage.elf loads but does not start Mead, Joseph
2007-05-18 13:28 ` Mirek23
2007-04-23 16:24 ` Andrei Konovalov
2007-04-23 17:35 ` Grant Likely
2007-04-24 13:42 ` Mirek23
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10142161.post@talk.nabble.com \
--to=miroslaw.dach@psi.ch \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).