From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from talk.nabble.com (www.nabble.com [72.21.53.35]) (using TLSv1 with cipher AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTP id 86307DDFA0 for ; Tue, 24 Apr 2007 01:12:04 +1000 (EST) Received: from [72.21.53.38] (helo=jubjub.nabble.com) by talk.nabble.com with esmtp (Exim 4.50) id 1Hg0Cu-0003Nb-H2 for linuxppc-embedded@ozlabs.org; Mon, 23 Apr 2007 08:12:00 -0700 Message-ID: <10142161.post@talk.nabble.com> Date: Mon, 23 Apr 2007 08:12:00 -0700 (PDT) From: Mirek23 To: linuxppc-embedded@ozlabs.org Subject: Re: zImage.elf loads but does not start In-Reply-To: <10079346.post@talk.nabble.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii References: <10079346.post@talk.nabble.com> List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , I have revised the xparameters_ml403.h and the setup of the FPGA part. I have found that the interrupt for the RS232 was not configured. Right now I was able to come to the point when the kernel was uncompressed but it did not start: loaded at: 00400000 004F9138 board data at: 004F7120 004F7138 relocated to: 00404064 0040407C zimage at: 00404DF1 004F6BBB avail ram: 004FA000 04000000 Linux/PPC load: console=ttl0,9600 ip=129.129.129.29 root=/dev/ram rw Uncompressing Linux...done. Now booting the kernel Does anybody has an idea what could be wrong? Best Regards Mirek -- View this message in context: http://www.nabble.com/zImage.elf-loads-but-not-starts-tf3607582.html#a10142161 Sent from the linuxppc-embedded mailing list archive at Nabble.com.