From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <10183-36126@sneakemail.com> Date: Sun, 21 Mar 2004 18:00:13 -0800 From: "Stephen Williams" <612dlag102@sneakemail.com> MIME-Version: 1.0 To: linuxppc-embedded@lists.linuxppc.org Subject: SystemACE, but I'm not a V2Pro Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: I'm successfully using the existing System ACE adapter driver to mount my compact flash devices, and that's great. But I'm getting some baggage I don't want. Specifically, in adapter.c the xsysace_init function replaces the ppc_md.restart function with xsysace_restart, which breaks reboot on my PPC405GPr based board. The brute force method is for me to #ifdef out that bit of code with something like "#ifndef CONFIG_JSE" (my board is a JSE board) but that seems klunky. It seems to me there may be others who have SystemACE boards without V2Pro chips. Would it be safe and reasonable for me to use the CONFIG_VIRTEX_II_PRO config define to ifdef that bit of code *in*? (I'm asking because I'd like to integrate my board support into the main tree someday, so I want a generally clean patch.) -- Steve Williams "The woods are lovely, dark and deep. steve at XXXXXXXXXX But I have promises to keep, http://www.XXXXXXXXXX and lines to code before I sleep, http://www.picturel.com And lines to code before I sleep." ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/