From mboxrd@z Thu Jan 1 00:00:00 1970 Subject: Re: LaCie USB HD not working... (more info) From: Bastien Nocera To: "linuxppc-dev@lists.linuxppc.org" In-Reply-To: <1024432158.509.8.camel@dozo> References: <1024432158.509.8.camel@dozo> Date: 19 Jun 2002 00:13:17 +0100 Message-Id: <1024441998.522.15.camel@dozo> Mime-Version: 1.0 Content-Type: text/plain Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Bad, replying to myself, Here's more debug though: Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. hub.c: USB new device connect on bus1/1, assigned device number 3 usb-storage: act_altsettting is 0 usb-storage: id_index calculated to be: 32 usb-storage: Array length appears to be: 86 usb-storage: Vendor: LaCie usb-storage: Product: USB Hard Disk usb-storage: USB Mass Storage device detected usb-storage: Endpoints: In: 0xc8cc34a0 Out: 0xc8cc34b4 Int: 0xc8cc34c8 (Period 100) usb_control/bulk_msg: timeout usb.c: error getting string descriptor 0 (error=-110) usb_control/bulk_msg: timeout usb.c: error getting string descriptor 0 (error=-110) usb-storage: New GUID 059fa6010000000000000000 usb-storage: Transport: Control/Bulk usb-storage: Protocol: Reduced Block Commands (RBC) usb-storage: *** thread sleeping. scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command INQUIRY (6 bytes) usb-storage: 12 00 00 00 ff 00 00 00 00 00 00 01 usb-storage: command_abort() called usb-storage: Call to usb_stor_control_msg() returned -104 usb-storage: -- transport indicates error, resetting usb-storage: CB_reset() called usb_control/bulk_msg: timeout usb-storage: CB[I] soft reset failed -110 usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: usb_stor_exit() called usb-storage: -- calling usb_deregister() usb.c: deregistering driver usb-storage That's what happens when I plug in/unplug my HD. On Tue, 2002-06-18 at 21:29, Bastien Nocera wrote: > > I'm getting another stab at this. I've had this drive for about a year, > never got it to work on my PPC boxes. > > Here's the lowdown: > LaCie USB 20G hard-drive, 0x59f/0xa601 ID (it's in the unusual_devs.h) > Some people got it to work it seems: > http://www.qbik.ch/usb/devices/showdev.php?id=68 > > Here's the log when I plug the device in: > Jun 18 21:04:26 dozo kernel: hub.c: USB new device connect on bus1/1, > assigned device number 2 > Jun 18 21:04:26 dozo kernel: usb.c: USB device 2 (vend/prod > 0x59f/0xa601) is not claimed by any active driver. > Jun 18 21:04:27 dozo kernel: Initializing USB Mass Storage driver... > Jun 18 21:04:27 dozo kernel: usb.c: registered new driver usb-storage > Jun 18 21:04:30 dozo kernel: usb_control/bulk_msg: timeout > Jun 18 21:04:33 dozo kernel: usb_control/bulk_msg: timeout > Jun 18 21:04:33 dozo kernel: scsi0 : SCSI emulation for USB Mass Storage > devicesJun 18 21:04:44 dozo kernel: usb_control/bulk_msg: timeout > > Did anybody got this drive to work on an OHCI controller or even better, > on a PPC ? -- /Bastien Nocera http://hadess.net ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/