From: Mirek23 <miroslaw.dach@psi.ch>
To: linuxppc-embedded@ozlabs.org
Subject: RE: zImage.elf loads but does not start
Date: Fri, 4 May 2007 08:04:29 -0700 (PDT) [thread overview]
Message-ID: <10323147.post@talk.nabble.com> (raw)
In-Reply-To: <10165159.post@talk.nabble.com>
I came to the point with my kernel 2.6 (patched by Grant) struggle on ml403
that it reaches the
stage to mount nfs root file system from the computer which is on another
segment of the network:
[ 2.565946] eth%d: XTemac: PHY detected at address 3.
[ 2.629348] eth0: Xilinx TEMAC #0 at 0x81200000 mapped to 0xC5020000,rq=1
[ 2.713113] eth0: XTemac id 1.0f, block id 5, type 8
[ 2.774335] mice: PS/2 mouse device common for all mice
[ 2.837152] TCP cubic registered
[ 2.876220] NET: Registered protocol family 1
[ 2.928569] NET: Registered protocol family 17
[ 3.485990] eth0: XTemac: Options: 0xb8f2
[ 7.517827] eth0: XTemac: We renegotiated the speed to: 100
[ 7.584504] eth0: XTemac: speed set to 100Mb/s
[ 8.652764] IP-Config: Unable to set interface netmask (-22).
[ 8.724733] Looking up port of RPC 100003/2 on 129.129.130.106
It cannot however go through the gateway because the macaddress is not
properly set (ie. it is set to 00:00:00:00).
My command line argument looks like:
CONFIG_CMDLINE="console=ttyUL0,9600 root=/dev/nfs rw
nfsroot=129.129.130.106:/opt/eldk41/ppc_4xx,tcp macaddr=00:50:c2:46:d8:01
ip=129.129.129.29:129.129.130.106:129.129.129.1:255.255.255.0:ML403:eth0:off
panic=1"
Does somebody know why the macaddress is not taken into account.
Mirek
--
View this message in context: http://www.nabble.com/zImage.elf-loads-but-not-starts-tf3607582.html#a10323147
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
next prev parent reply other threads:[~2007-05-04 15:04 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-19 15:10 zImage.elf loads but not starts Mirek23
2007-04-23 15:12 ` zImage.elf loads but does not start Mirek23
2007-04-23 16:11 ` Leonid
2007-04-24 16:55 ` Mirek23
2007-04-24 17:11 ` Andrei Konovalov
2007-05-04 15:04 ` Mirek23 [this message]
2007-05-04 15:41 ` Andrei Konovalov
2007-05-08 9:46 ` Mirek23
2007-05-08 21:46 ` Leonid
2007-05-08 21:50 ` Adrian Craine
2007-05-09 15:02 ` Charles Krinke
2007-05-10 8:45 ` Mirek23
2007-05-10 16:05 ` Mead, Joseph
2007-05-11 11:21 ` Mirek23
2007-05-15 12:08 ` Mirek23
2007-05-15 12:29 ` Andrei Konovalov
2007-05-15 12:45 ` Miroslaw Dach
2007-05-15 18:07 ` Andrei Konovalov
2007-05-15 18:49 ` Miroslaw Dach
2007-05-18 12:43 ` Mirek23
2007-05-25 12:24 ` Mirek23
2007-05-25 13:16 ` Andrei Konovalov
2007-05-25 15:23 ` Mirek23
2007-05-25 16:56 ` Advice needed Charles Krinke
2007-05-15 13:12 ` zImage.elf loads but does not start Mead, Joseph
2007-05-18 13:28 ` Mirek23
2007-04-23 16:24 ` Andrei Konovalov
2007-04-23 17:35 ` Grant Likely
2007-04-24 13:42 ` Mirek23
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10323147.post@talk.nabble.com \
--to=miroslaw.dach@psi.ch \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).