From mboxrd@z Thu Jan  1 00:00:00 1970
Subject: Re: [MPC8260] accessing I/Os while MMU is off
From: Gary Thomas <gary@mlbassoc.com>
To: vincent poirson <poirsonv@yahoo.fr>
Cc: linuxppc embedded <linuxppc-embedded@lists.linuxppc.org>
In-Reply-To: <20030526123940.45233.qmail@web12702.mail.yahoo.com>
References: <20030526123940.45233.qmail@web12702.mail.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1
Message-Id: <1053953308.4694.387.camel@hermes>
Mime-Version: 1.0
Date: 26 May 2003 06:48:29 -0600
Sender: owner-linuxppc-embedded@lists.linuxppc.org
List-Id: <linuxppc-embedded@lists.linuxppc.org>


On Mon, 2003-05-26 at 06:39, vincent poirson wrote:
> Well, I forgot one operand in the addis instruction
> but otherwise my code is OK. I checked that the right
> PDATC adress was in the GPR.
> I also forgot to say that my code works when I put it
> in a interrupt handler in a normal kernel module.
> What I do not understand is why the kernel keeps going
> in machine check exception when I try to load PDATC
> contents or store a value in PDATC.
>

Are you sure that the address you are using is correct?  In particular,
this may be a mapped (via MMU) address.  The physical address can often
be different.  When you are executing in this mode, you must use the
physical address.

>
>
>  --- None Atall <linux_meis@yahoo.com> a écrit : > You
> missed a small shift... :)
> >
> > -----------------------
> > li r16,r16,0x10
> > li r13, 0xf001
> > slw  r13,r13,r16
> > addis r13, 0x0d50
> > stw r14, 0(r13)
> > -----------------------
> >
> >                    Dimitris.
> >
> > --- vincent poirson <poirsonv@yahoo.fr> wrote:
> > >
> > > Hello,
> > >
> > > I want to change my PDATC value while in
> > > HardwareInterrupt code (in kernel/head.S) where
> > MMU
> > > is
> > > off. So I simply do :
> > > li r13, 0x0d50
> > > addis r13, 0xf001
> > > stw r14, 0(r13)
> > > // where 0xf0010d50 is my PDATC adress and r14 the
> > > value I want to store
> > > I do not understand why my kernel crahes and goes
> > in
> > > machine exception. Surprisingly, I can change
> > PDATC
> > > with BDI2000 but not with assembler code. Is this
> > an
> > > adress translation problem ?
> > > Am I missing something obvious ? Any help will be
> > > appreciated.
> > >
> > > Thanks in advance.
> > >
> > >
> > >
> >
> >
> > =====
> >
> ------------------------------------------------------------
> > -Dhmhtrios Meidanis
> > -Degree in Mathematics, University of the Aegean.
> > -Master in Computer Architecture and Digital
> >  Systems, University of Crete.
> >  Greece.
> >
> ------------------------------------------------------------
> >
>
>
--
Gary Thomas <gary@mlbassoc.com>
MLB Associates


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/