linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* new 601 port starting point?
@ 2003-06-02 17:19 Dave Weis
  2003-06-03  7:13 ` Benjamin Herrenschmidt
  2003-06-03  7:39 ` Remco Post
  0 siblings, 2 replies; 3+ messages in thread
From: Dave Weis @ 2003-06-02 17:19 UTC (permalink / raw)
  To: linuxppc-dev


I'm going to be working on the mca rs/6000 machines again. The kernel has
changed a bit since I last tried, so I need some advice.

Which platform should I base my work on? It's a 601 machine, no pci or isa
bus.

I have downloaded the 2.4.20-benh rsync-able tree to start with.

Thanks for any pointers

dave


--
Dave Weis             "I believe there are more instances of the abridgment
djweis@sjdjweis.com   of the freedom of the people by gradual and silent
                      encroachments of those in power than by violent
                      and sudden usurpations."- James Madison


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: new 601 port starting point?
  2003-06-02 17:19 new 601 port starting point? Dave Weis
@ 2003-06-03  7:13 ` Benjamin Herrenschmidt
  2003-06-03  7:39 ` Remco Post
  1 sibling, 0 replies; 3+ messages in thread
From: Benjamin Herrenschmidt @ 2003-06-03  7:13 UTC (permalink / raw)
  To: Dave Weis; +Cc: linuxppc-dev


On Mon, 2003-06-02 at 19:19, Dave Weis wrote:
> I'm going to be working on the mca rs/6000 machines again. The kernel has
> changed a bit since I last tried, so I need some advice.
>
> Which platform should I base my work on? It's a 601 machine, no pci or isa
> bus.
>
> I have downloaded the 2.4.20-benh rsync-able tree to start with.

I don't recommend using my tree for developing a new platform,
you should rather start from either the official 2.4.x tree in
kernel.org or the linuxppc_2_4, though the later is probably
what you want.

Ben.


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: new 601 port starting point?
  2003-06-02 17:19 new 601 port starting point? Dave Weis
  2003-06-03  7:13 ` Benjamin Herrenschmidt
@ 2003-06-03  7:39 ` Remco Post
  1 sibling, 0 replies; 3+ messages in thread
From: Remco Post @ 2003-06-03  7:39 UTC (permalink / raw)
  To: linuxppc-dev


On Mon, 2 Jun 2003 12:19:17 -0500 (CDT)
Dave Weis <djweis@sjdjweis.com> wrote:

>
> I'm going to be working on the mca rs/6000 machines again. The kernel has
> changed a bit since I last tried, so I need some advice.
>
> Which platform should I base my work on? It's a 601 machine, no pci or isa
> bus.
>

My boss happens to onw (and still have sitting around) a rs/6000 model 590.
This seems to be well, not very chrp, though I can't say for sure, but at
least AIX doesn't think it's chrp.


> I have downloaded the 2.4.20-benh rsync-able tree to start with.
>
> Thanks for any pointers
>
> dave
>
>
> --
> Dave Weis             "I believe there are more instances of the
> abridgment djweis@sjdjweis.com   of the freedom of the people by gradual
> and silent
>                       encroachments of those in power than by violent
>                       and sudden usurpations."- James Madison
>
>
>


--
Met vriendelijke groeten,

Remco Post

SARA - Stichting Academisch Rekencentrum Amsterdam    http://www.sara.nl
High Performance Computing  Tel. +31 20 592 8008    Fax. +31 20 668 3167

"I really didn't foresee the Internet. But then, neither did the computer
industry. Not that that tells us very much of course - the computer industry
didn't even foresee that the century was going to end." -- Douglas Adams

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2003-06-03  7:39 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-06-02 17:19 new 601 port starting point? Dave Weis
2003-06-03  7:13 ` Benjamin Herrenschmidt
2003-06-03  7:39 ` Remco Post

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).