* Controlling output pin
@ 2003-09-30 8:38 Toni Van Remortel
0 siblings, 0 replies; only message in thread
From: Toni Van Remortel @ 2003-09-30 8:38 UTC (permalink / raw)
To: linuxppc-embedded
Hi all,
I once found a small example somewhere which used an output pin of the
P1 connector of the EP405 board. It just outputted a square wave.
Now, I don't find it anymore, and I like to get it back, because it's
the perfect start for a kernel module I need to write.
Perhaps anybody else have another example on how to use an output
directly.
The target of my module:
* generate 2 PWM signals on 2 output pins.
* do this all in real time (with RTAI).
I rather start from an example, than start from scratch (because I never
dealt with direct pin control before).
So, if anybody van help me out with this, it's much appreciated.
--
Toni Van Remortel
Wetenschappelijk Medewerker - D-science lab
Real time Linux for embedded systems: http://linemb.d-sciencelab.com
Tel: +32 3 205 61 72 - Fax: +32 3 205 61 95
E-mail: t.vanremortel@ha.be
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-09-30 8:38 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-09-30 8:38 Controlling output pin Toni Van Remortel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).