From: Jason McMullan <jason.mcmullan@timesys.com>
To: linuxppc-embedded@lists.linuxppc.org
Subject: MPC8560ADS issues
Date: Wed, 10 Mar 2004 14:04:59 -0500 [thread overview]
Message-ID: <1078945499.3748.4.camel@veena.timesys> (raw)
I'm trying to work with FCCs on my PowerQuick III with a
MPC8560 Rev 1, and I'm having quite a difficult time attempting
to get the FCC ethernet ports to work.
The GigE (TSEC) ports work just fine, but the FCC ports don't seem
to TX or RX anything. No IRQs from the FCC, but I get IRQs from the
PHYs
Switch settings:
SW4: 1-4 ON, 5-8 OFF
SW10: 1 ON, 2-6 OFF, 7-8 ON
SW13: 1 OFF, 2-3 ON
J23,J22: MII(std)
J27,J31: MII
I have also verified that both of the FCC PHY's on the MII bus
are visible (at PHY IDs 2 and 3).
Has anyone had any success with the MPC8560ADS and FCCs? In either
Linux or u-boot?
--
Jason McMullan <jason.mcmullan@timesys.com>
TimeSys Corporation
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2004-03-10 19:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-10 19:04 Jason McMullan [this message]
2004-03-11 15:43 ` MPC8560ADS issues Matthew S. McClintock
2004-03-11 16:16 ` Dan Malek
2004-03-11 17:14 ` Matthew S. McClintock
2004-03-11 22:52 ` Kumar Gala
2004-03-11 23:53 ` Matthew S. McClintock
2004-03-11 18:42 ` Jason McMullan
2004-03-11 19:30 ` Dan Malek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1078945499.3748.4.camel@veena.timesys \
--to=jason.mcmullan@timesys.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).