Re: 2.6.5/iBook G3: Oops on resume from sleep

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

On Thu, 2004-04-08 at 05:17, Aaron Lunansky wrote:
> I'm having similar issues with an ibook G3 (600MHz) - only my system
> seems to fail to sleep, and this is regardless of modules (I have
> sound/airport/ethernet compiled as modules). By fails to sleep, I mean I
> get a blank screen and it does not respond to any input. I'm not sure
> where it is when it dies though - what's the best way to figure this
> out? (how can I make SysRq work on an ibook (which has no SysRq key)).

No, once the screen is off, there isn't much you can do. I suggest
you do some experiments in console mode, use "snooze -f" (that will
bypass pmud or pbbuttonsd, which tend to cut the backlight early).

Also, did it die on sleep or on wakeup ? That is, did it reach the
sleep state where the led starts "snoring" ?

> I get this with every 2.6.* kernel I've tried, including 2.6.5. I
> previously had sleep working on my ibook with a 2.6 kernel, but I've
> since replaced the (dead) hard drive. I can get my ibook to sleep with
> a 2.4.24 kernel.
>
> Thanks,
> Aaron
>
> On Mon, Apr 05, 2004 at 11:53:18PM +0200, Kiko Piris wrote:
> >
> > Hi,
> >
> > Yesterday I compiled vanilla 2.6.5 (plus laptop-mode patch).
> >
> > Today I noticed an oops when resuming from sleep.
> >
> > Here's what I get on the screen console:
> >
> > ---8<---
> > adb: starting probe task...
> > adb devices: [2]: 2 c4 [3]: 3 1 [7] 1f
> > ADB keyboard at 2, handler 1
> > ADB mouse at 3, handler set to 4 (trackpad)
> > adb: finished probe task...
> > tumbler: i2c is not initialized
> > Oops: kernel access of bad area, sig: 11 [#1]
> > NIP: DA378C3C LR: DA468E0C SP: D4F13D70 REGS: d4f13cc0 TRAP: 0301    Not tainted
> > MSR: 0000b032 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 11
> > DAR: 00000006, DSISR: 40000000
> > TASK = d74920c0[1233] 'pmud' Last syscall: 54
> > GPR00: DA468E0C D4F13D70 D74920C0 00000000 00000040 00000000 00000000 00000040
> > GPR08: 00000002 FFFFFFFF D74920C0 00000000 2DE985CF
> > Call trace:
> >  [da468e0c] snapper_set_capture_source+0x28/0x38 [snd_powermac]
> >  [da46936c] tumbler_resume+0xa0/0x138 [snd_powermac]
> >  [da466318] snd_pmac_resume+0xf4/0xf8 [snd_powermac]
> >  [da466364] snd_pmac_sleep_notify+0x48/0x54 [snd_powermac]
> >  [c030788c] 0xc030788c
> >  [c0307fe0] 0xc0307fe0
> >  [c03084c4] 0xc03084c4
> >  [c0308d2c] 0xc0308d2c
> >  [c0067c04] sys_ioctl+0xdc/0x2f4
> >  [c0007600] ret_from_syscall+0x0/0x44
> > eth0: Link is up at 100 Mbps, full-duplex.
> > eth0: Pause is disabled
> > --->8---
> >
> > And the system is completely hung (I've copied it by hand, so I could
> > have made a mistake typing).
> >
> > I've noticed that if I put the iBook to sleep having unloaded alsa, it
> > resumes ok. Having alsa loaded, I can reproduce it 100% of the times.
> >
> >
> > Some info about my system:
> >
> > * Debian Sid up2date.
> >
> > * Kernel config, if needed, is uploaded at
> > http://www.pirispons.net/bulma/llista/iBook/
> >
> > $ cat /proc/version
> > Linux version 2.6.5 (root@sacarino) (gcc version 3.3.3 (Debian 20040401)) #1 Sun Apr 4 14:23:10 CEST 2004
> >
> > $ cat /proc/cpuinfo
> > processor       : 0
> > cpu             : 750FX
> > temperature     : 47 C (uncalibrated)
> > clock           : 400MHz
> > revision        : 2.3 (pvr 7000 0203)
> > bogomips        : 793.71
> > machine         : PowerBook4,3
> > motherboard     : PowerBook4,3 MacRISC2 MacRISC Power Macintosh
> > detected as     : 257 (iBook 2 rev. 2)
> > pmac flags      : 0000000b
> > L2 cache        : 512K unified
> > memory          : 384MB
> > pmac-generation : NewWorld
> >
> >
> > Please, let me know if I can provide any additional information.
> >
> > Many thanks in advance
> >
> > --
> > Kiko
> >
>
--
Benjamin Herrenschmidt <benh@kernel.crashing.org>


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/