From: bert_maxel <bonlutin@hotmail.com>
To: linuxppc-embedded@ozlabs.org
Subject: RE: Audio Dirver for the 403/405?
Date: Fri, 1 Jun 2007 13:38:33 -0700 (PDT) [thread overview]
Message-ID: <10920136.post@talk.nabble.com> (raw)
In-Reply-To: <20070531193717.5743A1A48046@mail177-sin.bigfish.com>
Thanks for your input.
Can you send me the dsp driver that goes with opb_ac97?
That'll be a good start for me, I appreciate your help.
thank you Steve
bert
Stephen Neuendorffer wrote:
>
>
> There is an opb core developed for the Xilinx University Program board,
> which
> has a similar hardware interface to the ML403 (i.e. no PCI bridge)
> The XUPV2P web page with the opb_ac97 core is here:
> http://www.xilinx.com/univ/xupv2p.html
>
> I have a /dev/dsp driver (which I'll send to Bert directly) which limps
> along in 2.6.
> This core has a relatively small buffer and no master access to memory,
> which
> results in relatively poor performance, but it is a starting point.
>
> Steve
>
>> -----Original Message-----
>> From:
>> linuxppc-embedded-bounces+stephen=neuendorffer.name@ozlabs.org
>>
>> [mailto:linuxppc-embedded-bounces+stephen=neuendorffer.name@oz
> labs.org] On Behalf Of bert_maxel
>> Sent: Thursday, May 31, 2007 12:10 PM
>> To: linuxppc-embedded@ozlabs.org
>> Subject: Re: Audio Dirver for the 403/405?
>>
>>
>>
>>
>> Grant Likely-2 wrote:
>> >
>> > On 5/30/07, bert_maxel <bonlutin@hotmail.com> wrote:
>> >>
>> >> Hi all,
>> >>
>> >> Has anybody got some working audio driver (linux) for the
>> ML403/405 ?
>> >> I know it's an ac97 codec, but I can't find anything
>> related to the
>> >> xilinx boards?
>> >> If nobody has worked on this yet, I'm in trouble. I don't
>> know where
>> >> to start, or from what ac97 driver should I base my
>> initial development?
>> >
>> > IIRC, the old mvista 2.4 tree has an audio driver.
>> >
>> > g.
>> >
>> > --
>> > Grant Likely, B.Sc., P.Eng.
>> > Secret Lab Technologies Ltd.
>> > grant.likely@secretlab.ca
>> > (403) 399-0195
>> > _______________________________________________
>> > Linuxppc-embedded mailing list
>> > Linuxppc-embedded@ozlabs.org
>> > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>> >
>> >
>>
>> There are plenty of boards with an ac97 codec, but what's
>> missing is the glue for the ML403 board, there's no pci bus
>> in this case, opb cores instead.
>> I hope somebody can point me to a link of interest.
>>
>> thanks
>> --
>> View this message in context:
>> http://www.nabble.com/Audio-Dirver-for-the-403-405--tf3843165.
> html#a10900170
>> Sent from the linuxppc-embedded mailing list archive at Nabble.com.
>>
>> _______________________________________________
>> Linuxppc-embedded mailing list
>> Linuxppc-embedded@ozlabs.org
>> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>>
>>
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
>
--
View this message in context: http://www.nabble.com/Audio-Dirver-for-the-403-405--tf3843165.html#a10920136
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
prev parent reply other threads:[~2007-06-01 20:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-30 21:44 Audio Dirver for the 403/405? bert_maxel
2007-05-30 23:10 ` Grant Likely
2007-05-31 7:45 ` Andrei Konovalov
2007-05-31 19:10 ` bert_maxel
2007-05-31 19:37 ` Stephen Neuendorffer
2007-06-01 20:38 ` bert_maxel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10920136.post@talk.nabble.com \
--to=bonlutin@hotmail.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).