From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from pentafluge.infradead.org (pentafluge.infradead.org [213.146.154.40]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTP id 959B268051 for ; Thu, 18 Aug 2005 02:41:38 +1000 (EST) From: David Woodhouse To: Russell King In-Reply-To: <20050817121128.A19990@flint.arm.linux.org.uk> References: <1124209292.3869.5.camel@localhost.localdomain> <20050817121128.A19990@flint.arm.linux.org.uk> Content-Type: text/plain Date: Wed, 17 Aug 2005 17:39:30 +0100 Message-Id: <1124296771.3869.74.camel@localhost.localdomain> Mime-Version: 1.0 Cc: linuxppc-dev@ozlabs.org Subject: Re: [PATCH] Use platform device for 8250 registration List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Wed, 2005-08-17 at 12:11 +0100, Russell King wrote: > Doesn't PPC64 have NO_IRQ ? PPC64 does but I find no definition of is_real_interrupt() other than the bogus one in 8250.c which checks for zero. PPC32 does not -- let's clean that one up separately. --- linux-2.6.12/drivers/serial/Makefile~ 2005-08-11 13:51:50.000000000 +0100 +++ linux-2.6.12/drivers/serial/Makefile 2005-08-15 21:08:49.000000000 +0100 @@ -22,6 +22,7 @@ obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250 obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o +obj-$(CONFIG_SERIAL_8250_OF) += 8250_of.o obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o --- linux-2.6.12/drivers/serial/8250_of.c~ 2005-08-15 21:14:27.000000000 +0100 +++ linux-2.6.12/drivers/serial/8250_of.c 2005-08-15 21:20:59.000000000 +0100 @@ -0,0 +1,197 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if 0 +#define DBG(fmt...) printk(KERN_DEBUG fmt) +#else +#define DBG(fmt...) do { } while (0) +#endif + +/* + * This function can be used by platforms to "find" legacy serial ports. + * It works for "serial" nodes under an "isa" node, and will try to + * respect the "ibm,aix-loc" property if any. It works with up to 8 + * ports. + */ + +#define MAX_LEGACY_SERIAL_PORTS 8 +static int ports_probed = 0; + +static struct plat_serial8250_port serial_ports[MAX_LEGACY_SERIAL_PORTS+1]; +static unsigned int old_serial_count; + +void __init generic_find_legacy_serial_ports(u64 *physport, + unsigned int *default_speed) +{ + struct device_node *np; + u32 *sizeprop; + + struct isa_reg_property { + u32 space; + u32 address; + u32 size; + }; + + DBG(" -> generic_find_legacy_serial_port()\n"); + ports_probed = 1; + + *physport = 0; + if (default_speed) + *default_speed = 0; + + np = of_find_node_by_path("/"); + if (!np) + return; + + /* First fill our array */ + for (np = NULL; (np = of_find_node_by_type(np, "serial"));) { + struct device_node *isa, *pci; + struct isa_reg_property *reg; + unsigned long phys_size, addr_size; + u64 io_base; + u32 *rangesp; + u32 *interrupts, *clk, *spd; + char *typep; + int index, rlen, rentsize; + + /* Ok, first check if it's under an "isa" parent */ + isa = of_get_parent(np); + if (!isa || strcmp(isa->name, "isa")) { + DBG("%s: no isa parent found\n", np->full_name); + continue; + } + + /* Now look for an "ibm,aix-loc" property that gives us ordering + * if any... + */ + typep = (char *)get_property(np, "ibm,aix-loc", NULL); + + /* Get the ISA port number */ + reg = (struct isa_reg_property *)get_property(np, "reg", NULL); + if (reg == NULL) + goto next_port; + /* We assume the interrupt number isn't translated ... */ + interrupts = (u32 *)get_property(np, "interrupts", NULL); + /* get clock freq. if present */ + clk = (u32 *)get_property(np, "clock-frequency", NULL); + /* get default speed if present */ + spd = (u32 *)get_property(np, "current-speed", NULL); + /* Default to locate at end of array */ + index = old_serial_count; /* end of the array by default */ + + /* If we have a location index, then use it */ + if (typep && *typep == 'S') { + index = simple_strtol(typep+1, NULL, 0) - 1; + /* if index is out of range, use end of array instead */ + if (index >= MAX_LEGACY_SERIAL_PORTS) + index = old_serial_count; + /* if our index is still out of range, that mean that + * array is full, we could scan for a free slot but that + * make little sense to bother, just skip the port + */ + if (index >= MAX_LEGACY_SERIAL_PORTS) + goto next_port; + if (index >= old_serial_count) + old_serial_count = index + 1; + /* Check if there is a port who already claimed our slot */ + if (serial_ports[index].iobase != 0) { + /* if we still have some room, move it, else override */ + if (old_serial_count < MAX_LEGACY_SERIAL_PORTS) { + DBG("Moved legacy port %d -> %d\n", index, + old_serial_count); + serial_ports[old_serial_count++] = + serial_ports[index]; + } else { + DBG("Replacing legacy port %d\n", index); + } + } + } + if (index >= MAX_LEGACY_SERIAL_PORTS) + goto next_port; + if (index >= old_serial_count) + old_serial_count = index + 1; + + /* Now fill the entry */ + memset(&serial_ports[index], 0, sizeof(struct plat_serial8250_port)); + serial_ports[index].uartclk = (clk && *clk) ? *clk : BASE_BAUD * 16; + serial_ports[index].iobase = reg->address; + serial_ports[index].irq = interrupts ? interrupts[0] : 0; + serial_ports[index].flags = ASYNC_BOOT_AUTOCONF; + + DBG("Added legacy port, index: %d, port: %x, irq: %d, clk: %d\n", + index, + serial_ports[index].iobase, + serial_ports[index].irq, + serial_ports[index].uartclk); + + /* Get phys address of IO reg for port 1 */ + if (index != 0) + goto next_port; + + pci = of_get_parent(isa); + if (!pci) { + DBG("%s: no pci parent found\n", np->full_name); + goto next_port; + } + + rangesp = (u32 *)get_property(pci, "ranges", &rlen); + if (rangesp == NULL) { + of_node_put(pci); + goto next_port; + } + rlen /= 4; + + /* we need the #size-cells of the PCI bridge node itself */ + phys_size = 1; + sizeprop = (u32 *)get_property(pci, "#size-cells", NULL); + if (sizeprop != NULL) + phys_size = *sizeprop; + /* we need the parent #addr-cells */ + addr_size = prom_n_addr_cells(pci); + rentsize = 3 + addr_size + phys_size; + io_base = 0; + for (;rlen >= rentsize; rlen -= rentsize,rangesp += rentsize) { + if (((rangesp[0] >> 24) & 0x3) != 1) + continue; /* not IO space */ + io_base = rangesp[3]; + if (addr_size == 2) + io_base = (io_base << 32) | rangesp[4]; + } + if (io_base != 0) { + *physport = io_base + reg->address; + if (default_speed && spd) + *default_speed = *spd; + } + of_node_put(pci); + next_port: + of_node_put(isa); + } + + DBG(" <- generic_find_legacy_serial_port()\n"); +} + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_ports, + }, +}; + +static int __init serial_dev_init(void) +{ + u64 phys; + unsigned int spd; + + if (!ports_probed) + generic_find_legacy_serial_ports(&phys, &spd); + return platform_device_register(&serial_device); +} +arch_initcall(serial_dev_init); --- linux-2.6.12/drivers/serial/Kconfig~ 2005-08-11 13:51:50.000000000 +0100 +++ linux-2.6.12/drivers/serial/Kconfig 2005-08-15 21:13:41.000000000 +0100 @@ -77,6 +77,11 @@ config SERIAL_8250_CS If unsure, say N. +config SERIAL_8250_OF + bool + default y + depends on PPC_OF && SERIAL_8250 != n + config SERIAL_8250_ACPI bool "8250/16550 device discovery via ACPI namespace" default y if IA64 --- linux-2.6.12/arch/ppc64/kernel/setup.c~ 2005-08-11 13:52:04.000000000 +0100 +++ linux-2.6.12/arch/ppc64/kernel/setup.c 2005-08-15 20:27:25.000000000 +0100 @@ -1147,186 +1147,6 @@ void __init setup_default_decr(void) lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy; } -#ifndef CONFIG_PPC_ISERIES -/* - * This function can be used by platforms to "find" legacy serial ports. - * It works for "serial" nodes under an "isa" node, and will try to - * respect the "ibm,aix-loc" property if any. It works with up to 8 - * ports. - */ - -#define MAX_LEGACY_SERIAL_PORTS 8 -static struct plat_serial8250_port serial_ports[MAX_LEGACY_SERIAL_PORTS+1]; -static unsigned int old_serial_count; - -void __init generic_find_legacy_serial_ports(u64 *physport, - unsigned int *default_speed) -{ - struct device_node *np; - u32 *sizeprop; - - struct isa_reg_property { - u32 space; - u32 address; - u32 size; - }; - struct pci_reg_property { - struct pci_address addr; - u32 size_hi; - u32 size_lo; - }; - - DBG(" -> generic_find_legacy_serial_port()\n"); - - *physport = 0; - if (default_speed) - *default_speed = 0; - - np = of_find_node_by_path("/"); - if (!np) - return; - - /* First fill our array */ - for (np = NULL; (np = of_find_node_by_type(np, "serial"));) { - struct device_node *isa, *pci; - struct isa_reg_property *reg; - unsigned long phys_size, addr_size, io_base; - u32 *rangesp; - u32 *interrupts, *clk, *spd; - char *typep; - int index, rlen, rentsize; - - /* Ok, first check if it's under an "isa" parent */ - isa = of_get_parent(np); - if (!isa || strcmp(isa->name, "isa")) { - DBG("%s: no isa parent found\n", np->full_name); - continue; - } - - /* Now look for an "ibm,aix-loc" property that gives us ordering - * if any... - */ - typep = (char *)get_property(np, "ibm,aix-loc", NULL); - - /* Get the ISA port number */ - reg = (struct isa_reg_property *)get_property(np, "reg", NULL); - if (reg == NULL) - goto next_port; - /* We assume the interrupt number isn't translated ... */ - interrupts = (u32 *)get_property(np, "interrupts", NULL); - /* get clock freq. if present */ - clk = (u32 *)get_property(np, "clock-frequency", NULL); - /* get default speed if present */ - spd = (u32 *)get_property(np, "current-speed", NULL); - /* Default to locate at end of array */ - index = old_serial_count; /* end of the array by default */ - - /* If we have a location index, then use it */ - if (typep && *typep == 'S') { - index = simple_strtol(typep+1, NULL, 0) - 1; - /* if index is out of range, use end of array instead */ - if (index >= MAX_LEGACY_SERIAL_PORTS) - index = old_serial_count; - /* if our index is still out of range, that mean that - * array is full, we could scan for a free slot but that - * make little sense to bother, just skip the port - */ - if (index >= MAX_LEGACY_SERIAL_PORTS) - goto next_port; - if (index >= old_serial_count) - old_serial_count = index + 1; - /* Check if there is a port who already claimed our slot */ - if (serial_ports[index].iobase != 0) { - /* if we still have some room, move it, else override */ - if (old_serial_count < MAX_LEGACY_SERIAL_PORTS) { - DBG("Moved legacy port %d -> %d\n", index, - old_serial_count); - serial_ports[old_serial_count++] = - serial_ports[index]; - } else { - DBG("Replacing legacy port %d\n", index); - } - } - } - if (index >= MAX_LEGACY_SERIAL_PORTS) - goto next_port; - if (index >= old_serial_count) - old_serial_count = index + 1; - - /* Now fill the entry */ - memset(&serial_ports[index], 0, sizeof(struct plat_serial8250_port)); - serial_ports[index].uartclk = clk ? *clk : BASE_BAUD * 16; - serial_ports[index].iobase = reg->address; - serial_ports[index].irq = interrupts ? interrupts[0] : 0; - serial_ports[index].flags = ASYNC_BOOT_AUTOCONF; - - DBG("Added legacy port, index: %d, port: %x, irq: %d, clk: %d\n", - index, - serial_ports[index].iobase, - serial_ports[index].irq, - serial_ports[index].uartclk); - - /* Get phys address of IO reg for port 1 */ - if (index != 0) - goto next_port; - - pci = of_get_parent(isa); - if (!pci) { - DBG("%s: no pci parent found\n", np->full_name); - goto next_port; - } - - rangesp = (u32 *)get_property(pci, "ranges", &rlen); - if (rangesp == NULL) { - of_node_put(pci); - goto next_port; - } - rlen /= 4; - - /* we need the #size-cells of the PCI bridge node itself */ - phys_size = 1; - sizeprop = (u32 *)get_property(pci, "#size-cells", NULL); - if (sizeprop != NULL) - phys_size = *sizeprop; - /* we need the parent #addr-cells */ - addr_size = prom_n_addr_cells(pci); - rentsize = 3 + addr_size + phys_size; - io_base = 0; - for (;rlen >= rentsize; rlen -= rentsize,rangesp += rentsize) { - if (((rangesp[0] >> 24) & 0x3) != 1) - continue; /* not IO space */ - io_base = rangesp[3]; - if (addr_size == 2) - io_base = (io_base << 32) | rangesp[4]; - } - if (io_base != 0) { - *physport = io_base + reg->address; - if (default_speed && spd) - *default_speed = *spd; - } - of_node_put(pci); - next_port: - of_node_put(isa); - } - - DBG(" <- generic_find_legacy_serial_port()\n"); -} - -static struct platform_device serial_device = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = serial_ports, - }, -}; - -static int __init serial_dev_init(void) -{ - return platform_device_register(&serial_device); -} -arch_initcall(serial_dev_init); - -#endif /* CONFIG_PPC_ISERIES */ int check_legacy_ioport(unsigned long base_port) { --- linux-2.6.12/include/asm-ppc/pc_serial.h~ 2005-08-15 21:19:32.000000000 +0100 +++ linux-2.6.12/include/asm-ppc/pc_serial.h 2005-08-15 21:20:24.000000000 +0100 @@ -26,18 +26,4 @@ #define RS_TABLE_SIZE 4 #endif -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF -#endif - +#define SERIAL_PORT_DFNS /* */ -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ - { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ - { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ -- dwmw2