From: khollan <khollan@daktronics.com>
To: linuxppc-embedded@ozlabs.org
Subject: Porting Linux to Xilinx ML410
Date: Wed, 27 Jun 2007 09:40:05 -0700 (PDT) [thread overview]
Message-ID: <11328063.post@talk.nabble.com> (raw)
Hi Im trying to get linux 2.6 to run on my ML410 board from xilinx. I just
created a real simple system with a Uartlite DDR2 and DDR interupt
controller and sysace. I installed the patches I found for Uartlite and
sysace I found here. I boot the zImage with XMD with the following
commands:
dow t:/zImage.elf
con
This is what I get out the serial port:
loaded at: 00400000 00537138
board data at: 00000000 00000018
relocated to: 00404064 0040407C
zimage at: 00404E6D 005345F1
avail ram: 00538000 7C7F1B78
Linux/PPC load: console=ttyUL0,9600 root=/dev/xsysace/disc0/part3 rw
Uncompressing Linux...done.
Now booting the kernel
It always stall on the Now booting the kernel. Im new to linux building and
any help or suggestions are greatly appreciated.
Thanks
Kevin
--
View this message in context: http://www.nabble.com/Porting-Linux-to-Xilinx-ML410-tf3989483.html#a11328063
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
next reply other threads:[~2007-06-27 16:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-27 16:40 khollan [this message]
2007-06-27 21:18 ` Porting Linux to Xilinx ML410 Thomas Glanzmann
2007-06-28 17:53 ` khollan
2007-07-02 20:58 ` khollan
2007-07-02 22:51 ` Grant Likely
2007-07-05 20:23 ` khollan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11328063.post@talk.nabble.com \
--to=khollan@daktronics.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).