* Problem in configuring interrupt in PPC 8272 processor using montavista linux 2.6 kernel
@ 2007-06-28 5:52 Misbah khan
0 siblings, 0 replies; only message in thread
From: Misbah khan @ 2007-06-28 5:52 UTC (permalink / raw)
To: linuxppc-embedded
Hi All
I am facing problem in configuring PPC 8272 processor for interrupt . The
zeroth bit of SIUMCR register when set with 1 will be configured for IRQ3
else will be configured with BBD. Even though i am writing 1 to this bit
while inserting the driver and its actually writing 1 to that location
either , but the IRQ3 is not been configured for that and hence is
configured for BBD (BBD and IRQ3 are multiplexed) the result is that the bus
is toggling . As a consiguence of this my driver is getting infinite
interrupt and it is going to deadlock .
If you have an experience of such problem ,i wish you could suggest me .
Hoping for a reply , for that i shall rema in thankful to you .
regard
Misbah
--
View this message in context: http://www.nabble.com/Problem-in-configuring-interrupt-in-PPC-8272-processor-using-montavista-linux-2.6-kernel-tf3992552.html#a11337419
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-06-28 5:52 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-28 5:52 Problem in configuring interrupt in PPC 8272 processor using montavista linux 2.6 kernel Misbah khan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).