From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <1138-00007@sneakemail.com> Date: Wed, 07 Jul 2004 12:30:19 -0700 From: "Stephen Williams" <612dlag102@sneakemail.com> MIME-Version: 1.0 To: linuxppc-embedded@lists.linuxppc.org Subject: Re: rpm for embedded system References: <21704-45627@sneakemail.com> <40EC4D3E.5090405@bluewin.ch> In-Reply-To: <40EC4D3E.5090405@bluewin.ch> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Wolfgang Grandegger wolfgang.grandegger-at-bluewin.ch |PPC Linux Embedded| wrote: > On 07/07/2004 09:11 PM Stephen Williams wrote: > >>I'm using ELDK-3 from Denx for my ppc based board, which has >>disk space (in the form of a compact flash) that I want to >>manage using rpm. (I'd like to rpm install the eldk packages >>that I want on my target.) >> >>So I'm looking for a cross-rpm howto. Seems like the ppc_4xx-rpm >>that comes with the ELDK gets me half way there. > > > > Check http://www.denx.de/twiki/bin/view/DULG/ELDKRebuildingComponents Almost. That is instructions for remaking the ELDK packages from the src.rpms. But I want to take the existing binary rpms and install them on my owh root. This does *not* work: ppc_4xx-rpm --root=/mnt/flash foo.ppc.rpm I want to do something like that with the packages, so that I can install individual existing ppc.rpm packages from the ELDK disk onyl by flash card. -- Steve Williams "The woods are lovely, dark and deep. steve at XXXXXXXXXX But I have promises to keep, http://www.XXXXXXXXXX and lines to code before I sleep, http://www.picturel.com And lines to code before I sleep." ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/