From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: RE: [HACK] add sandpoint + flattened dt support to arch/powerpc/b oot From: Benjamin Herrenschmidt To: Zang Roy-r61911 In-Reply-To: <9FCDBA58F226D911B202000BDBAD4673062C0A9D@zch01exm40.ap.freescale.net> References: <9FCDBA58F226D911B202000BDBAD4673062C0A9D@zch01exm40.ap.freescale.net> Content-Type: text/plain Date: Thu, 18 May 2006 20:36:36 +1000 Message-Id: <1147948597.5192.11.camel@localhost.localdomain> Mime-Version: 1.0 Cc: linuxppc-dev List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Thu, 2006-05-18 at 18:24 +0800, Zang Roy-r61911 wrote: > > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > > > index 6729c98..de09eac 100644 > > > --- a/arch/powerpc/Kconfig > > > +++ b/arch/powerpc/Kconfig > > > @@ -323,7 +323,10 @@ config PPC_ISERIES > > > > > > config EMBEDDED6xx > > > bool "Embedded 6xx/7xx/7xxx-based board" > > > - depends on PPC32 && BROKEN > > > + depends on PPC32 > > > + select PPC_UDBG_16550 > > > + select MPIC > > > + select MPIC_SERIAL > > > > Not totally related to your patch but I'm tempted to turn that into a > > "Generic 6xx/7xx/7xxx" rather than "embedded" if we manage to always > > avoid board specific code most of the time, but instead add necessary > > bits in the device-tree. We still need a per-board Kconfig option I > > think that will just select the necessary bits and pieces > > (and more than > > one can be selected at one time). Also, I think right now, > > the embedded > > stuff is +/- exclusive from the MULTIPLATFORM stuff, that > > must be fixed > > asap. We are all living in the same kernel now :) > > config Embedded6xx is not accurate. It can not cover all the > board with 7xx/7xxx based processor. Forget about CONFIG_EMBEDDED6xx, just do your own CONFIG_BOARDNAME for now, the processor is irrelevant as long as it's a 6xx/7xx/7xxx derivative. Ben.