From: "Michel Dänzer" <michel@tungstengraphics.com>
To: Dave Jones <davej@codemonkey.org.uk>
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH] uninorth: Add module param 'aperture' for aperture size
Date: Wed, 04 Oct 2006 14:56:44 +0200 [thread overview]
Message-ID: <1159966604.23084.236.camel@thor.lorrainebruecke.local> (raw)
In contrast to most if not all PC BIOSes, OpenFirmware (OF) on PowerMacs with
UniNorth bridges does not allow changing the aperture size. The size set up by
OF is usually 16 MB, which is too low for graphics intensive environments.
Hence, add a module parameter that allows changing the aperture size at driver
initialization time. When the parameter is not specified, the default is 32 MB.
Signed-off-by: Michel Dänzer <michel@tungstengraphics.com>
---
Reversed a 'value == variable' test, as suggested by Andreas Schwab (thanks!).
drivers/char/agp/uninorth-agp.c | 54 +++++++++++++++++++++++++--------------
1 files changed, 35 insertions(+), 19 deletions(-)
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index 78c8cb2..c2b6f7d 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -27,32 +27,42 @@ #include "agp.h"
static int uninorth_rev;
static int is_u3;
+static char __devinitdata *aperture = NULL;
static int uninorth_fetch_size(void)
{
- int i;
- u32 temp;
- struct aper_size_info_32 *values;
-
- pci_read_config_dword(agp_bridge->dev, UNI_N_CFG_GART_BASE, &temp);
- temp &= ~(0xfffff000);
- values = A_SIZE_32(agp_bridge->driver->aperture_sizes);
-
- for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
- if (temp == values[i].size_value) {
- agp_bridge->previous_size =
- agp_bridge->current_size = (void *) (values + i);
- agp_bridge->aperture_size_idx = i;
- return values[i].size;
+ int i, size = 0;
+ struct aper_size_info_32 *values =
+ A_SIZE_32(agp_bridge->driver->aperture_sizes);
+
+ if (aperture) {
+ char *save = aperture;
+
+ size = memparse(aperture, &aperture) >> 20;
+ aperture = save;
+
+ for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++)
+ if (size == values[i].size)
+ break;
+
+ if (i == agp_bridge->driver->num_aperture_sizes) {
+ printk(KERN_ERR PFX "Invalid aperture size, using"
+ " default\n");
+ size = 0;
+ aperture = NULL;
}
}
- agp_bridge->previous_size =
- agp_bridge->current_size = (void *) (values + 1);
- agp_bridge->aperture_size_idx = 1;
- return values[1].size;
+ if (!size) {
+ for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++)
+ if (values[i].size == 32)
+ break;
+ }
- return 0;
+ agp_bridge->previous_size =
+ agp_bridge->current_size = (void *)(values + i);
+ agp_bridge->aperture_size_idx = i;
+ return values[i].size;
}
static void uninorth_tlbflush(struct agp_memory *mem)
@@ -668,5 +678,11 @@ static void __exit agp_uninorth_cleanup(
module_init(agp_uninorth_init);
module_exit(agp_uninorth_cleanup);
+module_param(aperture, charp, 0);
+MODULE_PARM_DESC(aperture,
+ "Aperture size, must be power of two between 4MB and an\n"
+ "\t\tupper limit specific to the UniNorth revision.\n"
+ "\t\tDefault: 32M");
+
MODULE_AUTHOR("Ben Herrenschmidt & Paul Mackerras");
MODULE_LICENSE("GPL");
--
1.4.2.1
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
next reply other threads:[~2006-10-04 12:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-04 12:56 Michel Dänzer [this message]
2006-10-05 1:09 ` [PATCH] uninorth: Add module param 'aperture' for aperture size Benjamin Herrenschmidt
[not found] <115608447678-git-send-email->
[not found] ` <11560844762890-git-send-email->
2006-08-21 16:09 ` [PATCH 2/2] " Michel Dänzer
2006-08-22 7:25 ` Benjamin Herrenschmidt
2006-08-22 8:55 ` Michel Dänzer
2006-08-22 22:17 ` Benjamin Herrenschmidt
2006-08-23 11:15 ` [PATCH] " Michel Dänzer
2006-10-04 10:44 ` Michel Dänzer
2006-10-04 12:24 ` Andreas Schwab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1159966604.23084.236.camel@thor.lorrainebruecke.local \
--to=michel@tungstengraphics.com \
--cc=davej@codemonkey.org.uk \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).