Re: [PATCH] 2.6.18-rt7: PowerPC: fix breakage in threaded fasteoi type IRQ handlers

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

On Mon, 2006-11-20 at 11:01 +0100, Ingo Molnar wrote:

> so the question is not 'is there an ACK' (all non-MSI-type-of IRQ 
> delivery mechanisms have some sort of ACK mechanism), but what is the 
> precise structure of ACK-ing an IRQ that the host recieves.
> 
> on PPC64, 'get the vector' initiates an ACK as well - is that done 
> before handle_irq() is done?

Yes.

> > So by doing a mask followed by an eoi, you essentially mask the 
> > interrupt preventing further delivery of that interrupt and lower the 
> > CPU priority in the PIC thus allowing processing of further 
> > interrupts.
> 
> correct, that's what should happen.
> 
> > Are there other fasteoi controllers than the ones I have on powerpc 
> > anyway ?
> 
> well, if you mean the x86 APICs, there you get the vector 'for free' as 
> part of the IRQ entry call sequence, and there's an EOI register in the 
> local APIC that notifies the IRQ hardware, lowers the CPU priority, etc. 
> We have that as an ->eoi handler right now.

Ok, so that's like me. Which means that what you need is a specific thre
aded_fasteoi flow handler that does mask & eoi, not ack.

Note that I still think it would work in the absence of mask too if the
controller only does edge interrupts, as it is the case for the cell.

Cheers,
Ben.