From: Grant Likely <grant.likely@secretlab.ca>
To: linuxppc-dev@ozlabs.org, Paul Mackerras <paulus@samba.org>
Cc: Sylvain Munaut <tnt@246tNt.com>
Subject: [PATCH 8/9] [POWERPC] Add device trees for lite5200 and lite5200b eval boards
Date: Mon, 27 Nov 2006 14:16:29 -0700 [thread overview]
Message-ID: <11646622081678-git-send-email-grant.likely@secretlab.ca> (raw)
In-Reply-To: <11646622083725-git-send-email-grant.likely@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
---
arch/powerpc/boot/dts/lite5200.dts | 313 ++++++++++++++++++++++++++++++++++
arch/powerpc/boot/dts/lite5200b.dts | 318 +++++++++++++++++++++++++++++++++++
2 files changed, 631 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
new file mode 100644
index 0000000..8bc0d25
--- /dev/null
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -0,0 +1,313 @@
+/*
+ * Lite5200 board Device Tree Source
+ *
+ * Copyright 2006 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "Lite5200";
+ compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ #interrupt-cells = <3>;
+ device_type = "soc";
+ ranges = <0 f0000000 f0010000>;
+ reg = <f0000000 00010000>;
+ bus-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "mpc5200-cdm\0mpc52xx-cdm";
+ reg = <200 38>;
+ };
+
+ pic@500 {
+ // 5200 interrupts are encoded into two levels;
+ linux,phandle = <500>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ device_type = "interrupt-controller";
+ compatible = "mpc5200-pic\0mpc52xx-pic";
+ reg = <500 80>;
+ built-in;
+ };
+
+ gpt@600 { // General Purpose Timer
+ compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <600 10>;
+ interrupts = <1 9 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@610 { // General Purpose Timer
+ compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <610 10>;
+ interrupts = <1 a 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@620 { // General Purpose Timer
+ compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <620 10>;
+ interrupts = <1 b 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@630 { // General Purpose Timer
+ compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <630 10>;
+ interrupts = <1 c 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@640 { // General Purpose Timer
+ compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <640 10>;
+ interrupts = <1 d 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@650 { // General Purpose Timer
+ compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <650 10>;
+ interrupts = <1 e 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@660 { // General Purpose Timer
+ compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <660 10>;
+ interrupts = <1 f 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@670 { // General Purpose Timer
+ compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <670 10>;
+ interrupts = <1 10 0>;
+ interrupt-parent = <500>;
+ };
+
+ rtc@800 { // Real time clock
+ compatible = "mpc5200-rtc\0mpc52xx-rtc";
+ device_type = "rtc";
+ reg = <800 100>;
+ interrupts = <1 5 0 1 6 0>;
+ interrupt-parent = <500>;
+ };
+
+ mscan@900 {
+ device_type = "mscan";
+ compatible = "mpc5200-mscan\0mpc52xx-mscan";
+ interrupts = <2 11 0>;
+ interrupt-parent = <500>;
+ reg = <900 80>;
+ };
+
+ mscan@980 {
+ device_type = "mscan";
+ compatible = "mpc5200-mscan\0mpc52xx-mscan";
+ interrupts = <1 12 0>;
+ interrupt-parent = <500>;
+ reg = <980 80>;
+ };
+
+ gpio@b00 {
+ compatible = "mpc5200-gpio\0mpc52xx-gpio";
+ reg = <b00 40>;
+ interrupts = <1 7 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpio-wkup@b00 {
+ compatible = "mpc5200-gpio-wkup\0mpc52xx-gpio-wkup";
+ reg = <c00 40>;
+ interrupts = <1 8 0 0 3 0>;
+ interrupt-parent = <500>;
+ };
+
+ pci@0d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "mpc5200-pci\0mpc52xx-pci";
+ reg = <d00 100>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <c000 0 0 1 500 0 0 3
+ c000 0 0 2 500 0 0 3
+ c000 0 0 3 500 0 0 3
+ c000 0 0 4 500 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 a 0>;
+ interrupt-parent = <500>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 80000000 80000000 0 20000000
+ 02000000 0 a0000000 a0000000 0 10000000
+ 01000000 0 00000000 b0000000 0 01000000>;
+ };
+
+ spi@f00 {
+ device_type = "spi";
+ compatible = "mpc5200-spi\0mpc52xx-spi";
+ reg = <f00 20>;
+ interrupts = <2 d 0 2 e 0>;
+ interrupt-parent = <500>;
+ };
+
+ usb@1000 {
+ device_type = "usb-ohci-be";
+ compatible = "mpc5200-ohci\0mpc52xx-ohci\0ohci-be";
+ reg = <1000 ff>;
+ interrupts = <2 6 0>;
+ interrupt-parent = <500>;
+ };
+
+ bestcomm@1200 {
+ device_type = "dma-controller";
+ compatible = "mpc5200-bestcomm\0mpc52xx-bestcomm";
+ reg = <1200 80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 a 0 3 b 0
+ 3 c 0 3 d 0 3 e 0 3 f 0>;
+ interrupt-parent = <500>;
+ };
+
+ xlb@1f00 {
+ compatible = "mpc5200-xlb\0mpc52xx-xlb";
+ reg = <1f00 100>;
+ };
+
+ serial@2000 { // PSC1
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+ port-number = <0>; // Logical port assignment
+ reg = <2000 100>;
+ interrupts = <2 1 0>;
+ interrupt-parent = <500>;
+ };
+
+ // PSC2 in spi mode example
+ spi@2200 { // PSC2
+ device_type = "spi";
+ compatible = "mpc5200-psc-spi\0mpc52xx-psc-spi";
+ reg = <2200 100>;
+ interrupts = <2 2 0>;
+ interrupt-parent = <500>;
+ };
+
+ // PSC3 in CODEC mode example
+ i2s@2400 { // PSC3
+ device_type = "i2s";
+ compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s";
+ reg = <2400 100>;
+ interrupts = <2 3 0>;
+ interrupt-parent = <500>;
+ };
+
+ // PSC4 unconfigured
+ //serial@2600 { // PSC4
+ // device_type = "serial";
+ // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+ // reg = <2600 100>;
+ // interrupts = <2 b 0>;
+ // interrupt-parent = <500>;
+ //};
+
+ // PSC5 unconfigured
+ //serial@2800 { // PSC5
+ // device_type = "serial";
+ // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+ // reg = <2800 100>;
+ // interrupts = <2 c 0>;
+ // interrupt-parent = <500>;
+ //};
+
+ // PSC6 in AC97 mode example
+ ac97@2c00 { // PSC6
+ device_type = "ac97";
+ compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97";
+ reg = <2c00 100>;
+ interrupts = <2 4 0>;
+ interrupt-parent = <500>;
+ };
+
+ ethernet@3000 {
+ device_type = "network";
+ compatible = "mpc5200-fec\0mpc52xx-fec";
+ reg = <3000 800>;
+ mac-address = [ 02 03 04 05 06 07 ]; // Bad!
+ interrupts = <2 5 0>;
+ interrupt-parent = <500>;
+ };
+
+ ata@3a00 {
+ device_type = "ata";
+ compatible = "mpc5200-ata\0mpc52xx-ata";
+ reg = <3a00 100>;
+ interrupts = <2 7 0>;
+ interrupt-parent = <500>;
+ };
+
+ i2c@3d00 {
+ device_type = "i2c";
+ compatible = "mpc5200-i2c\0mpc52xx-i2c";
+ reg = <3d00 40>;
+ interrupts = <2 f 0>;
+ interrupt-parent = <500>;
+ };
+
+ i2c@3d40 {
+ device_type = "i2c";
+ compatible = "mpc5200-i2c\0mpc52xx-i2c";
+ reg = <3d40 40>;
+ interrupts = <2 10 0>;
+ interrupt-parent = <500>;
+ };
+ sram@8000 {
+ device_type = "sram";
+ compatible = "mpc5200-sram\0mpc52xx-sram\0sram";
+ reg = <8000 4000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
new file mode 100644
index 0000000..81cb764
--- /dev/null
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -0,0 +1,318 @@
+/*
+ * Lite5200B board Device Tree Source
+ *
+ * Copyright 2006 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "Lite5200b";
+ compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 10000000>; // 256MB
+ };
+
+ soc5200@f0000000 {
+ #interrupt-cells = <3>;
+ device_type = "soc";
+ ranges = <0 f0000000 f0010000>;
+ reg = <f0000000 00010000>;
+ bus-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "mpc5200b-cdm\0mpc52xx-cdm";
+ reg = <200 38>;
+ };
+
+ pic@500 {
+ // 5200 interrupts are encoded into two levels;
+ linux,phandle = <500>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ device_type = "interrupt-controller";
+ compatible = "mpc5200b-pic\0mpc52xx-pic";
+ reg = <500 80>;
+ built-in;
+ };
+
+ gpt@600 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <600 10>;
+ interrupts = <1 9 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@610 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <610 10>;
+ interrupts = <1 a 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@620 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <620 10>;
+ interrupts = <1 b 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@630 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <630 10>;
+ interrupts = <1 c 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@640 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <640 10>;
+ interrupts = <1 d 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@650 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <650 10>;
+ interrupts = <1 e 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@660 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <660 10>;
+ interrupts = <1 f 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpt@670 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ device_type = "gpt";
+ reg = <670 10>;
+ interrupts = <1 10 0>;
+ interrupt-parent = <500>;
+ };
+
+ rtc@800 { // Real time clock
+ compatible = "mpc5200b-rtc\0mpc52xx-rtc";
+ device_type = "rtc";
+ reg = <800 100>;
+ interrupts = <1 5 0 1 6 0>;
+ interrupt-parent = <500>;
+ };
+
+ mscan@900 {
+ device_type = "mscan";
+ compatible = "mpc5200b-mscan\0mpc52xx-mscan";
+ interrupts = <2 11 0>;
+ interrupt-parent = <500>;
+ reg = <900 80>;
+ };
+
+ mscan@980 {
+ device_type = "mscan";
+ compatible = "mpc5200b-mscan\0mpc52xx-mscan";
+ interrupts = <1 12 0>;
+ interrupt-parent = <500>;
+ reg = <980 80>;
+ };
+
+ gpio@b00 {
+ compatible = "mpc5200b-gpio\0mpc52xx-gpio";
+ reg = <b00 40>;
+ interrupts = <1 7 0>;
+ interrupt-parent = <500>;
+ };
+
+ gpio-wkup@b00 {
+ compatible = "mpc5200b-gpio-wkup\0mpc52xx-gpio-wkup";
+ reg = <c00 40>;
+ interrupts = <1 8 0 0 3 0>;
+ interrupt-parent = <500>;
+ };
+
+ pci@0d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "mpc5200b-pci\0mpc52xx-pci";
+ reg = <d00 100>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <c000 0 0 1 500 0 0 3 // 1st slot
+ c000 0 0 2 500 1 1 3
+ c000 0 0 3 500 1 2 3
+ c000 0 0 4 500 1 3 3
+
+ c800 0 0 1 500 1 1 3 // 2nd slot
+ c800 0 0 2 500 1 2 3
+ c800 0 0 3 500 1 3 3
+ c800 0 0 4 500 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 a 0>;
+ interrupt-parent = <500>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 80000000 80000000 0 20000000
+ 02000000 0 a0000000 a0000000 0 10000000
+ 01000000 0 00000000 b0000000 0 01000000>;
+ };
+
+ spi@f00 {
+ device_type = "spi";
+ compatible = "mpc5200b-spi\0mpc52xx-spi";
+ reg = <f00 20>;
+ interrupts = <2 d 0 2 e 0>;
+ interrupt-parent = <500>;
+ };
+
+ usb@1000 {
+ device_type = "usb-ohci-be";
+ compatible = "mpc5200b-ohci\0mpc52xx-ohci\0ohci-be";
+ reg = <1000 ff>;
+ interrupts = <2 6 0>;
+ interrupt-parent = <500>;
+ };
+
+ bestcomm@1200 {
+ device_type = "dma-controller";
+ compatible = "mpc5200b-bestcomm\0mpc52xx-bestcomm";
+ reg = <1200 80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 a 0 3 b 0
+ 3 c 0 3 d 0 3 e 0 3 f 0>;
+ interrupt-parent = <500>;
+ };
+
+ xlb@1f00 {
+ compatible = "mpc5200b-xlb\0mpc52xx-xlb";
+ reg = <1f00 100>;
+ };
+
+ serial@2000 { // PSC1
+ device_type = "serial";
+ compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+ port-number = <0>; // Logical port assignment
+ reg = <2000 100>;
+ interrupts = <2 1 0>;
+ interrupt-parent = <500>;
+ };
+
+ // PSC2 in spi mode example
+ spi@2200 { // PSC2
+ device_type = "spi";
+ compatible = "mpc5200b-psc-spi\0mpc52xx-psc-spi";
+ reg = <2200 100>;
+ interrupts = <2 2 0>;
+ interrupt-parent = <500>;
+ };
+
+ // PSC3 in CODEC mode example
+ i2s@2400 { // PSC3
+ device_type = "i2s";
+ compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s";
+ reg = <2400 100>;
+ interrupts = <2 3 0>;
+ interrupt-parent = <500>;
+ };
+
+ // PSC4 unconfigured
+ //serial@2600 { // PSC4
+ // device_type = "serial";
+ // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+ // reg = <2600 100>;
+ // interrupts = <2 b 0>;
+ // interrupt-parent = <500>;
+ //};
+
+ // PSC5 unconfigured
+ //serial@2800 { // PSC5
+ // device_type = "serial";
+ // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+ // reg = <2800 100>;
+ // interrupts = <2 c 0>;
+ // interrupt-parent = <500>;
+ //};
+
+ // PSC6 in AC97 mode example
+ ac97@2c00 { // PSC6
+ device_type = "ac97";
+ compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97";
+ reg = <2c00 100>;
+ interrupts = <2 4 0>;
+ interrupt-parent = <500>;
+ };
+
+ ethernet@3000 {
+ device_type = "network";
+ compatible = "mpc5200b-fec\0mpc52xx-fec";
+ reg = <3000 800>;
+ mac-address = [ 02 03 04 05 06 07 ]; // Bad!
+ interrupts = <2 5 0>;
+ interrupt-parent = <500>;
+ };
+
+ ata@3a00 {
+ device_type = "ata";
+ compatible = "mpc5200b-ata\0mpc52xx-ata";
+ reg = <3a00 100>;
+ interrupts = <2 7 0>;
+ interrupt-parent = <500>;
+ };
+
+ i2c@3d00 {
+ device_type = "i2c";
+ compatible = "mpc5200b-i2c\0mpc52xx-i2c";
+ reg = <3d00 40>;
+ interrupts = <2 f 0>;
+ interrupt-parent = <500>;
+ };
+
+ i2c@3d40 {
+ device_type = "i2c";
+ compatible = "mpc5200b-i2c\0mpc52xx-i2c";
+ reg = <3d40 40>;
+ interrupts = <2 10 0>;
+ interrupt-parent = <500>;
+ };
+ sram@8000 {
+ device_type = "sram";
+ compatible = "mpc5200b-sram\0mpc52xx-sram\0sram";
+ reg = <8000 4000>;
+ };
+ };
+};
--
1.4.3.rc2.g0503
next prev parent reply other threads:[~2006-11-27 21:17 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-27 21:16 MPC52xx support rework for 2.6.20 Grant Likely
2006-11-27 21:16 ` [PATCH 1/9] [POWERPC] Document describing mpc52xx device tree binding conventions Grant Likely
2006-11-27 21:16 ` [PATCH 2/9] [POWERPC] Move MPC52xx PIC driver into arch/powerpc/platforms/52xx Grant Likely
2006-11-27 21:16 ` [PATCH 3/9] [POWERPC] Put mpc52xx support file in platforms/52xx Grant Likely
2006-11-27 21:16 ` [PATCH 4/9] [POWERPC] move Efika support files into platforms/52xx Grant Likely
2006-11-27 21:16 ` [PATCH 5/9] [POWERPC] Separate IRQ config / register set from main header Grant Likely
2006-11-27 21:16 ` [PATCH 6/9] [POWERPC] Add common routines for 52xx support in arch/powerpc Grant Likely
2006-11-27 21:16 ` [PATCH 7/9] [POWERPC] Add lite5200 board support to arch/powerpc Grant Likely
2006-11-27 21:16 ` Grant Likely [this message]
2006-11-27 21:16 ` [PATCH 9/9] [POWERPC] defconfig for lite5200 board Grant Likely
2006-11-27 21:56 ` [PATCH 4/9] [POWERPC] move Efika support files into platforms/52xx Arnd Bergmann
2006-11-27 22:09 ` Grant Likely
2006-11-27 22:12 ` Benjamin Herrenschmidt
2006-11-27 22:33 ` Arnd Bergmann
2006-11-27 21:39 ` MPC52xx support rework for 2.6.20 Sylvain Munaut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11646622081678-git-send-email-grant.likely@secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
--cc=tnt@246tNt.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).