* Kernel 2.6.18.1 start hangs after Now Bootin the Kernel
@ 2007-01-19 9:29 alayrac christophe
0 siblings, 0 replies; only message in thread
From: alayrac christophe @ 2007-01-19 9:29 UTC (permalink / raw)
To: linuxppc-embedded
Hy all,
I've colmpiled Linux 2.6.18.1 for ML403 and the start hangs after
loaded at: 00400000 0050E13C
board data at: FFFFFFFF 00000017
relocated to: 004040A0 004040B8
zimage at: 00404E25 0050B014
avail ram: 0050F000 00FFF7FF
Linux/PPC load: console=ttyS0,9600 root=/dev/xsa2 rw
Uncompressing Linux...done.
Now booting the kernel
The board data at: look very strange
Any Idea?
Note :
Board ML403
Processor : ppc405
Xilinx toolchain : EDK 8.2.02
Hard Design : from scratch UART16550, TEMAC (V3), Sysace, DDR 32M, BRAM
16k, GPIO
Any help would be greatly appreciated.
Kinds regards
Chris
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-01-19 8:29 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-01-19 9:29 Kernel 2.6.18.1 start hangs after Now Bootin the Kernel alayrac christophe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).