From: alayrac christophe <christophe.alayrac@cresitt.com>
To: linuxppc-embedded@ozlabs.org
Subject: ML403, 2.6.17.1 kernel panic
Date: Tue, 23 Jan 2007 13:43:15 +0100 [thread overview]
Message-ID: <1169556195.16144.3.camel@localhost.localdomain> (raw)
Hi all,
I did not succeed to start kernel 2.6.17.1 on ML403 platform.
Any help would be appreciated.
Please foind log message here after
<--------------------------------------------->
loaded at: 00400000 0051313C
board data at: 00511124 0051113C
relocated to: 004050F0 00405108
zimage at: 00405805 00510151
avail ram: 00514000 10000000
Linux/PPC load: console=ttyS0,9600 ip=off root=/dev/xsa2 rw
Uncompressing Linux...done.
Now booting the kernel
[ 0.000000] Linux version 2.6.17.1 (alayrac@debian-ca) (gcc version
3.4.4) #6 Tue Jan 23 13:02:07 CET 2007
[ 0.000000] Xilinx ML403 Reference System (Virtex-4 FX)
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: console=ttyS0,9600 ip=off
root=/dev/xsa2 rw
[ 0.000000] Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFE000
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000447] Console: colour dummy device 80x25
[ 0.004755] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.012362] Inode-cache hash table entries: 16384 (order: 4, 65536
bytes)
[ 0.150082] Memory: 257408k available (1720k kernel code, 604k data,
92k init, 0k highmem)
[ 0.233054] Mount-cache hash table entries: 512
[ 0.248273] NET: Registered protocol family 16
[ 0.269541] NET: Registered protocol family 2
[ 0.309165] IP route cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.311470] TCP established hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.313095] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.313868] TCP: Hash tables configured (established 8192 bind 4096)
[ 0.313969] TCP reno registered
[ 0.340676] NTFS driver 2.1.27 [Flags: R/O].
[ 0.341618] io scheduler noop registered
[ 0.341905] io scheduler anticipatory registered (default)
[ 0.342144] io scheduler deadline registered
[ 0.342556] io scheduler cfq registered
[ 0.445374] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing disabled
[ 0.456887] serial8250.0: ttyS0 at MMIO 0x40401003 (irq = 3) is a
16550A
[ 2.198859] RAMDISK driver initialized: 16 RAM disks of 8192K size
1024 blocksize
[ 2.302352] loop: loaded (max 8 devices)
[ 2.352351] nbd: registered device at major 43
[ 2.441661] xsa: xsa1 xsa2
[ 2.494925] Data machine check in kernel mode.
[ 2.548283] Oops: machine check, sig: 7 [#1]
[ 2.599427] NIP: C013C8D8 LR: C012C5E8 CTR: 00000000
[ 2.658911] REGS: c023cf50 TRAP: 0202 Not tainted (2.6.17.1)
[ 2.729919] MSR: 00029030 <EE,ME,IR,DR> CR: 84000048 XER: 20000030
[ 2.806810] TASK = c04a9b40[1] 'swapper' THREAD: c04b0000
[ 2.869491] GPR00: 0000000A C04B1E10 C04A9B40 C01CD6A8 00000068
D1042200 C057942C C056A418
[ 2.970525] GPR08: C056A260 C0579304 D1042010 11111111 00000000
FFFFFFFF FFFFFFFF FFFFFFFF
[ 3.071561] GPR16: FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
00510FFC FFFFEFFF FFFFFFFF
[ 3.172597] GPR24: FFFFFFFF C01EF708 C05792D8 C01EF858 C01EF820
C01EF700 C0579260 C0240000
[ 3.275823] NIP [C013C8D8] XPacketFifoV200a_Initialize+0x60/0x7c
[ 3.348007] LR [C012C5E8] XTemac_ConfigureFifoAccess+0x28/0x9c
[ 3.418100] Call Trace:
[ 3.447386] [C04B1E10] [C000ACE8] __ioremap+0xe8/0x14c (unreliable)
[ 3.522798] [C04B1E20] [C012C5E8] XTemac_ConfigureFifoAccess
+0x28/0x9c
[ 3.601334] [C04B1E30] [C012ACF0] Initialize+0x3c/0xd0
[ 3.663101] [C04B1E40] [C012A35C] xtenet_probe+0x14c/0x608
[ 3.729033] [C04B1EB0] [C011E964] driver_probe_device+0x90/0x108
[ 3.801321] [C04B1ED0] [C011EB18] __driver_attach+0x88/0xf4
[ 3.868296] [C04B1EF0] [C011DC68] bus_for_each_dev+0x54/0x94
[ 3.936313] [C04B1F20] [C011EBA8] driver_attach+0x24/0x34
[ 4.001204] [C04B1F30] [C011E274] bus_add_driver+0x74/0x148
[ 4.068180] [C04B1F50] [C011F150] driver_register+0xa4/0xb8
[ 4.135153] [C04B1F80] [C0233D58] xtenet_init+0x18/0x28
[ 4.198066] [C04B1F90] [C0002454] init+0xa4/0x27c
[ 4.254624] [C04B1FF0] [C000509C] kernel_thread+0x44/0x60
[ 4.319606] Instruction dump:
[ 4.355234] 40a20014 4bffff79 38000001 901fb758 48000024 38000000
901fb758 91690004
[ 4.448871] 90a90008 91490000 3800000a 900a0000 <7c0006ac> 80010014
38600000 83e1000c
[ 4.548246] Kernel panic - not syncing: Attempted to kill init!
[ 4.619432] <0>Rebooting in 180 seconds..
<--------------------------------------------->
Regards
Chris
next reply other threads:[~2007-01-23 11:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-23 12:43 alayrac christophe [this message]
2007-01-23 12:46 ` ML403, 2.6.17.1 kernel panic Andrei Konovalov
2007-01-23 17:25 ` alayrac christophe
2007-01-23 17:11 ` Andrei Konovalov
2007-01-24 17:04 ` alayrac christophe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1169556195.16144.3.camel@localhost.localdomain \
--to=christophe.alayrac@cresitt.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).