* Re: patches in powerpc.git
2007-02-07 4:03 patches in powerpc.git Paul Mackerras
@ 2007-02-07 4:14 ` Grant Likely
2007-02-07 4:25 ` Olof Johansson
` (7 subsequent siblings)
8 siblings, 0 replies; 22+ messages in thread
From: Grant Likely @ 2007-02-07 4:14 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
Paul,
Could you also pull this patch?
http://patchwork.ozlabs.org/linuxppc/patch?id=8612
I had (tried to) repost it to the list on Jan 24; but I looks like my
mailer ate it. :(
Thanks,
g.
On 2/6/07, Paul Mackerras <paulus@samba.org> wrote:
> The following is the list of commits that I have in the powerpc.git
> tree, and which I plan to ask Linus to pull tomorrow. If anyone
> thinks any of these should *not* go in, let me know quickly.
>
> If anyone has patches not listed here that they want in 2.6.21, please
> let me or the relevant sub-arch maintainer know. I have put in all
> the patches I know about that don't seem to be still under discussion.
>
> (Note that Geoff Levand's "[PATCH 1/16] ps3: inform incomplete" isn't
> listed here, because it's already upstream in Linus' tree.)
>
> Paul.
>
> arch/powerpc/Kconfig | 30
> arch/powerpc/Kconfig.debug | 18
> arch/powerpc/boot/Makefile | 1
> arch/powerpc/boot/dts/mpc8272ads.dts | 55 -
> arch/powerpc/boot/dts/mpc8323emds.dts | 345 +++++
> arch/powerpc/boot/dts/mpc8560ads.dts | 10
> arch/powerpc/boot/dts/mpc866ads.dts | 162 ++
> arch/powerpc/boot/dts/mpc885ads.dts | 185 +++
> arch/powerpc/configs/celleb_defconfig | 1408 +++++++++++++++++++++
> arch/powerpc/configs/mpc8272_ads_defconfig | 848 +++++++++++++
> arch/powerpc/configs/mpc832xemds_defconfig | 1083 ++++++++++++++++
> arch/powerpc/configs/mpc834x_itx_defconfig | 7
> arch/powerpc/configs/mpc834x_mds_defconfig | 3
> arch/powerpc/configs/mpc8360emds_defconfig | 3
> arch/powerpc/configs/mpc866_ads_defconfig | 829 +++++++++++++
> arch/powerpc/configs/mpc885_ads_defconfig | 827 ++++++++++++
> arch/powerpc/configs/pasemi_defconfig | 1722 ++++++++++++++++++++++++++
> arch/powerpc/configs/ps3_defconfig | 240 +++-
> arch/powerpc/kernel/Makefile | 1
> arch/powerpc/kernel/cpu_setup_pa6t.S | 44 +
> arch/powerpc/kernel/cputable.c | 21
> arch/powerpc/kernel/entry_64.S | 59 -
> arch/powerpc/kernel/head_32.S | 5
> arch/powerpc/kernel/head_64.S | 2
> arch/powerpc/kernel/iomap.c | 20
> arch/powerpc/kernel/irq.c | 2
> arch/powerpc/kernel/misc_64.S | 40 +
> arch/powerpc/kernel/module_32.c | 7
> arch/powerpc/kernel/pci_32.c | 1
> arch/powerpc/kernel/pci_64.c | 1
> arch/powerpc/kernel/pmc.c | 37 -
> arch/powerpc/kernel/ppc_ksyms.c | 1
> arch/powerpc/kernel/prom.c | 18
> arch/powerpc/kernel/ptrace.c | 24
> arch/powerpc/kernel/sysfs.c | 141 +-
> arch/powerpc/kernel/traps.c | 2
> arch/powerpc/kernel/udbg.c | 4
> arch/powerpc/kernel/udbg_16550.c | 24
> arch/powerpc/kernel/vio.c | 6
> arch/powerpc/lib/Makefile | 2
> arch/powerpc/lib/dma-noncoherent.c | 24
> arch/powerpc/lib/rheap.c | 3
> arch/powerpc/mm/hugetlbpage.c | 3
> arch/powerpc/mm/mem.c | 20
> arch/powerpc/mm/pgtable_32.c | 5
> arch/powerpc/oprofile/common.c | 2
> arch/powerpc/oprofile/op_model_7450.c | 10
> arch/powerpc/oprofile/op_model_fsl_booke.c | 81 +
> arch/powerpc/oprofile/op_model_power4.c | 10
> arch/powerpc/oprofile/op_model_rs64.c | 10
> arch/powerpc/platforms/82xx/mpc82xx.c | 2
> arch/powerpc/platforms/82xx/mpc82xx_ads.c | 2
> arch/powerpc/platforms/82xx/pq2ads.h | 5
> arch/powerpc/platforms/83xx/misc.c | 29
> arch/powerpc/platforms/83xx/mpc832x_mds.c | 3
> arch/powerpc/platforms/83xx/mpc834x_itx.c | 2
> arch/powerpc/platforms/83xx/mpc834x_sys.c | 2
> arch/powerpc/platforms/83xx/mpc8360e_pb.c | 3
> arch/powerpc/platforms/86xx/Kconfig | 1
> arch/powerpc/platforms/86xx/mpc86xx_smp.c | 1
> arch/powerpc/platforms/8xx/Kconfig | 300 +----
> arch/powerpc/platforms/8xx/Makefile | 6
> arch/powerpc/platforms/8xx/m8xx_setup.c | 303 +++++
> arch/powerpc/platforms/8xx/mpc86xads.h | 95 +
> arch/powerpc/platforms/8xx/mpc86xads_setup.c | 301 +++++
> arch/powerpc/platforms/8xx/mpc885ads.h | 95 +
> arch/powerpc/platforms/8xx/mpc885ads_setup.c | 387 ++++++
> arch/powerpc/platforms/Makefile | 3
> arch/powerpc/platforms/cell/Makefile | 7
> arch/powerpc/platforms/cell/spu_base.c | 3
> arch/powerpc/platforms/cell/spu_manage.c | 420 ++++++
> arch/powerpc/platforms/cell/spu_priv1_mmio.c | 422 ------
> arch/powerpc/platforms/celleb/Makefile | 9
> arch/powerpc/platforms/celleb/beat.c | 163 ++
> arch/powerpc/platforms/celleb/beat.h | 40 +
> arch/powerpc/platforms/celleb/beat_syscall.h | 160 ++
> arch/powerpc/platforms/celleb/beat_wrapper.h | 220 +++
> arch/powerpc/platforms/celleb/htab.c | 311 +++++
> arch/powerpc/platforms/celleb/hvCall.S | 287 ++++
> arch/powerpc/platforms/celleb/interrupt.c | 274 ++++
> arch/powerpc/platforms/celleb/interrupt.h | 33
> arch/powerpc/platforms/celleb/iommu.c | 104 ++
> arch/powerpc/platforms/celleb/pci.c | 481 +++++++
> arch/powerpc/platforms/celleb/pci.h | 35 +
> arch/powerpc/platforms/celleb/scc.h | 145 ++
> arch/powerpc/platforms/celleb/scc_epci.c | 409 ++++++
> arch/powerpc/platforms/celleb/scc_sio.c | 101 ++
> arch/powerpc/platforms/celleb/scc_uhc.c | 94 +
> arch/powerpc/platforms/celleb/setup.c | 191 +++
> arch/powerpc/platforms/celleb/smp.c | 124 ++
> arch/powerpc/platforms/celleb/spu_priv1.c | 208 +++
> arch/powerpc/platforms/celleb/udbg_beat.c | 97 +
> arch/powerpc/platforms/embedded6xx/Kconfig | 9
> arch/powerpc/platforms/maple/pci.c | 23
> arch/powerpc/platforms/maple/setup.c | 3
> arch/powerpc/platforms/pasemi/Kconfig | 10
> arch/powerpc/platforms/pasemi/Makefile | 3
> arch/powerpc/platforms/pasemi/idle.c | 88 +
> arch/powerpc/platforms/pasemi/iommu.c | 281 ++++
> arch/powerpc/platforms/pasemi/pasemi.h | 12
> arch/powerpc/platforms/pasemi/pci.c | 13
> arch/powerpc/platforms/pasemi/powersave.S | 80 +
> arch/powerpc/platforms/pasemi/setup.c | 105 +-
> arch/powerpc/platforms/powermac/smp.c | 1
> arch/powerpc/platforms/ps3/Makefile | 1
> arch/powerpc/platforms/ps3/htab.c | 1
> arch/powerpc/platforms/ps3/interrupt.c | 442 ++++---
> arch/powerpc/platforms/ps3/mm.c | 1
> arch/powerpc/platforms/ps3/os-area.c | 22
> arch/powerpc/platforms/ps3/platform.h | 151 ++
> arch/powerpc/platforms/ps3/repository.c | 220 +++
> arch/powerpc/platforms/ps3/setup.c | 19
> arch/powerpc/platforms/ps3/smp.c | 3
> arch/powerpc/platforms/ps3/spu.c | 20
> arch/powerpc/platforms/ps3/system-bus.c | 34 -
> arch/powerpc/platforms/pseries/eeh.c | 19
> arch/powerpc/platforms/pseries/eeh_driver.c | 3
> arch/powerpc/platforms/pseries/lpar.c | 51 +
> arch/powerpc/platforms/pseries/pci.c | 2
> arch/powerpc/sysdev/Makefile | 2
> arch/powerpc/sysdev/commproc.c | 398 ++++++
> arch/powerpc/sysdev/cpm2_pic.c | 154 +-
> arch/powerpc/sysdev/cpm2_pic.h | 2
> arch/powerpc/sysdev/fsl_soc.c | 274 ++++
> arch/powerpc/sysdev/grackle.c | 2
> arch/powerpc/sysdev/ipic.c | 17
> arch/powerpc/sysdev/micropatch.c | 743 +++++++++++
> arch/powerpc/sysdev/mpc8xx_pic.c | 197 +++
> arch/powerpc/sysdev/mpc8xx_pic.h | 12
> arch/powerpc/sysdev/mpic.c | 66 +
> arch/powerpc/sysdev/qe_lib/qe_ic.c | 6
> arch/ppc/Kconfig | 9
> arch/ppc/boot/simple/Makefile | 4
> arch/ppc/boot/simple/misc.c | 15
> arch/ppc/configs/gemini_defconfig | 618 ---------
> arch/ppc/kernel/Makefile | 1
> arch/ppc/kernel/head.S | 18
> arch/ppc/kernel/ppc_ksyms.c | 1
> arch/ppc/mm/pgtable.c | 5
> arch/ppc/platforms/Makefile | 1
> arch/ppc/platforms/gemini.h | 165 --
> arch/ppc/platforms/gemini_pci.c | 41 -
> arch/ppc/platforms/gemini_prom.S | 90 -
> arch/ppc/platforms/gemini_serial.h | 40 -
> arch/ppc/platforms/gemini_setup.c | 577 ---------
> arch/ppc/platforms/mpc866ads_setup.c | 2
> arch/ppc/syslib/Makefile | 1
> arch/ppc/syslib/ppc85xx_rio.c | 2
> arch/ppc/xmon/start.c | 5
> drivers/char/Kconfig | 7
> drivers/char/Makefile | 1
> drivers/char/hvc_beat.c | 134 ++
> drivers/net/fs_enet/fs_enet.h | 1
> drivers/net/gianfar_ethtool.c | 2
> drivers/ps3/Makefile | 1
> drivers/ps3/vuart.c | 4
> drivers/ps3/vuart.h | 38 -
> drivers/serial/cpm_uart/cpm_uart_cpm1.c | 15
> drivers/serial/cpm_uart/cpm_uart_cpm1.h | 3
> drivers/serial/cpm_uart/cpm_uart_cpm2.h | 3
> include/asm-powerpc/cputable.h | 13
> include/asm-powerpc/dcr.h | 1
> include/asm-powerpc/elf.h | 2
> include/asm-powerpc/firmware.h | 9
> include/asm-powerpc/fs_pd.h | 49 +
> include/asm-powerpc/hvcall.h | 1
> include/asm-powerpc/io.h | 6
> include/asm-powerpc/iommu.h | 1
> include/asm-powerpc/ipic.h | 2
> include/asm-powerpc/irq.h | 3
> include/asm-powerpc/mmu.h | 1
> include/asm-powerpc/mpc8260.h | 24
> include/asm-powerpc/mpc8xx.h | 28
> include/asm-powerpc/mpic.h | 24
> include/asm-powerpc/oprofile_impl.h | 89 -
> include/asm-powerpc/pci-bridge.h | 2
> include/asm-powerpc/ps3.h | 225 +--
> include/asm-powerpc/reg.h | 14
> include/asm-powerpc/smp.h | 1
> include/asm-powerpc/spu.h | 13
> include/asm-powerpc/spu_priv1.h | 2
> include/asm-powerpc/time.h | 2
> include/asm-powerpc/udbg.h | 2
> include/asm-ppc/commproc.h | 1
> include/asm-ppc/ibm4xx.h | 1
> include/asm-ppc/m48t35.h | 77 -
> include/asm-ppc/reg_booke.h | 2
> include/asm-ppc/serial.h | 2
> include/linux/log2.h | 11
> include/linux/sysdev.h | 12
> 190 files changed, 16855 insertions(+), 3343 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/mpc8323emds.dts
> create mode 100644 arch/powerpc/boot/dts/mpc866ads.dts
> create mode 100644 arch/powerpc/boot/dts/mpc885ads.dts
> create mode 100644 arch/powerpc/configs/celleb_defconfig
> create mode 100644 arch/powerpc/configs/mpc8272_ads_defconfig
> create mode 100644 arch/powerpc/configs/mpc832xemds_defconfig
> create mode 100644 arch/powerpc/configs/mpc866_ads_defconfig
> create mode 100644 arch/powerpc/configs/mpc885_ads_defconfig
> create mode 100644 arch/powerpc/configs/pasemi_defconfig
> create mode 100644 arch/powerpc/kernel/cpu_setup_pa6t.S
> rename arch/{ppc/kernel/dma-mapping.c => powerpc/lib/dma-noncoherent.c} (95%)
> create mode 100644 arch/powerpc/platforms/8xx/Makefile
> create mode 100644 arch/powerpc/platforms/8xx/m8xx_setup.c
> create mode 100644 arch/powerpc/platforms/8xx/mpc86xads.h
> create mode 100644 arch/powerpc/platforms/8xx/mpc86xads_setup.c
> create mode 100644 arch/powerpc/platforms/8xx/mpc885ads.h
> create mode 100644 arch/powerpc/platforms/8xx/mpc885ads_setup.c
> create mode 100644 arch/powerpc/platforms/cell/spu_manage.c
> create mode 100644 arch/powerpc/platforms/celleb/Makefile
> create mode 100644 arch/powerpc/platforms/celleb/beat.c
> create mode 100644 arch/powerpc/platforms/celleb/beat.h
> create mode 100644 arch/powerpc/platforms/celleb/beat_syscall.h
> create mode 100644 arch/powerpc/platforms/celleb/beat_wrapper.h
> create mode 100644 arch/powerpc/platforms/celleb/htab.c
> create mode 100644 arch/powerpc/platforms/celleb/hvCall.S
> create mode 100644 arch/powerpc/platforms/celleb/interrupt.c
> create mode 100644 arch/powerpc/platforms/celleb/interrupt.h
> create mode 100644 arch/powerpc/platforms/celleb/iommu.c
> create mode 100644 arch/powerpc/platforms/celleb/pci.c
> create mode 100644 arch/powerpc/platforms/celleb/pci.h
> create mode 100644 arch/powerpc/platforms/celleb/scc.h
> create mode 100644 arch/powerpc/platforms/celleb/scc_epci.c
> create mode 100644 arch/powerpc/platforms/celleb/scc_sio.c
> create mode 100644 arch/powerpc/platforms/celleb/scc_uhc.c
> create mode 100644 arch/powerpc/platforms/celleb/setup.c
> create mode 100644 arch/powerpc/platforms/celleb/smp.c
> create mode 100644 arch/powerpc/platforms/celleb/spu_priv1.c
> create mode 100644 arch/powerpc/platforms/celleb/udbg_beat.c
> create mode 100644 arch/powerpc/platforms/pasemi/Kconfig
> create mode 100644 arch/powerpc/platforms/pasemi/idle.c
> create mode 100644 arch/powerpc/platforms/pasemi/iommu.c
> create mode 100644 arch/powerpc/platforms/pasemi/powersave.S
> rename drivers/ps3/system-bus.c => arch/powerpc/platforms/ps3/system-bus.c (94%)
> create mode 100644 arch/powerpc/sysdev/commproc.c
> create mode 100644 arch/powerpc/sysdev/micropatch.c
> create mode 100644 arch/powerpc/sysdev/mpc8xx_pic.c
> create mode 100644 arch/powerpc/sysdev/mpc8xx_pic.h
> delete mode 100644 arch/ppc/configs/gemini_defconfig
> delete mode 100644 arch/ppc/platforms/gemini.h
> delete mode 100644 arch/ppc/platforms/gemini_pci.c
> delete mode 100644 arch/ppc/platforms/gemini_prom.S
> delete mode 100644 arch/ppc/platforms/gemini_serial.h
> delete mode 100644 arch/ppc/platforms/gemini_setup.c
> create mode 100644 drivers/char/hvc_beat.c
> create mode 100644 include/asm-powerpc/mpc8260.h
> create mode 100644 include/asm-powerpc/mpc8xx.h
> delete mode 100644 include/asm-ppc/m48t35.h
>
> Adrian Bunk (1):
> [POWERPC] Remove the broken Gemini support
>
> Akinobu Mita (1):
> [POWERPC] Use is_init() instead of pid==1
>
> Anton Blanchard (1):
> [POWERPC] Move ELF_ET_DYN_BASE up to 512MB point
>
> Benjamin Herrenschmidt (2):
> [POWERPC] ps3: system bus minor mmio fix
> [POWERPC] ps3: cleanup interrupt bmp routines
>
> David Gibson (1):
> [POWERPC] Compile fixes for arch/powerpc dcr code
>
> David Woodhouse (1):
> [POWERPC] Mask 32-bit system call arguments to 32 bits on PPC64 in audit code
>
> Geert Uytterhoeven (3):
> [POWERPC] ps3: repository storage support
> [POWERPC] ps3: add interrupt alloc for outlets
> [POWERPC] ps3: get av_multi_out params
>
> Geoff Levand (14):
> [POWERPC] ps3: repository misc fixes
> [POWERPC] ps3: fix struct alignment attributes
> [POWERPC] ps3: rename interrupt symbols
> [POWERPC] ps3: smp interrupt fixes
> [POWERPC] ps3: bind interrupt to cpu
> [POWERPC] ps3: fix interrupt bmp
> [POWERPC] ps3: remove cpuinfo
> [POWERPC] ps3: get firmware version
> [POWERPC] ps3: remove unneeded header include
> [POWERPC] ps3: ps3_defconfig updates
> [POWERPC] PS3: Move system bus to platform directory
> [POWERPC] PS3: Move vuart declarations to ps3.h
> [POWERPC] PS3: Fix DMA scatter-gather
> [POWERPC] PS3: Enable USB mass storage
>
> Ishizaki Kou (20):
> [POWERPC] spufs: Add SPU register lock
> [POWERPC] TLB insertion cleanup
> [POWERPC] Fix oprofile support on Cell LPAR
> [POWERPC] Add a field for each specific bus to struct pci_controller
> [POWERPC] Add IRQ remapping hook
> [POWERPC] Celleb: hypervisor call numbers
> [POWERPC] Celleb: Cell SCC definitions
> [POWERPC] Celleb: Support PCI bus and base of I/O
> [POWERPC] Celleb: setup sio in SCC
> [POWERPC] Celleb: interfaces to the hypervisor
> [POWERPC] Celleb: support interrupts
> [POWERPC] Celleb: setup usb host controller in SCC
> [POWERPC] Celleb: support iommu
> [POWERPC] Celleb: htab routines
> [POWERPC] Celleb: support udbg
> [POWERPC] Celleb: hypervisor console driver
> [POWERPC] Celleb: consolidate spu management ops
> [POWERPC] Celleb: support spu priv1 ops
> [POWERPC] Celleb: basic support
> [POWERPC] Celleb: add celleb_defconfig
>
> Jiri Kosina (2):
> [POWERPC] 86xx: local_irq_disable() is redundant after local_irq_save()
> [POWERPC] powermac: local_irq_disable() is redundant after local_irq_save()
>
> Kim Phillips (2):
> [POWERPC] 83xx: Add the mpc832xemds defconfig
> [POWERPC] 83xx: Add the mpc8323emds.dts
>
> Kumar Gala (6):
> [POWERPC] 83xx: Fix Kconfig to only enable FP math emulation for the MPC832x
> [POWERPC] 83xx: Don't call ioremap in the reset function
> [POWERPC] 83xx: Make platform *_init_IRQ() static
> [POWERPC] 83xx: Return a point to the struct ipic from ipic_init()
> [POWERPC] Remove fastcall function attribute
> [POWERPC] Enable stack debug features on ppc32
>
> Li Yang (1):
> [POWERPC] 83xx: Fix compiler warnings on 836x and 832x
>
> Linas Vepstas (2):
> [POWERPC] Clarify EEH error message
> [POWERPC] pSeries: EEH improperly enabled for some Power4 systems
>
> Livio Soares (1):
> [POWERPC] Fix performance monitor exception
>
> Mariusz Kozlowski (6):
> [POWERPC] arch/ppc/kernel/prom.c of_node_(get|put) cleanup
> [POWERPC] arch/powerpc/kernel/vio.c of_node_put cleanup
> [POWERPC] arch/powerpc/sysdev/ipic.c of_node_get cleanup
> [POWERPC] arch/powerpc/sysdev/mpic.c of_node_get cleanup
> [POWERPC] arch/powerpc/sysdev/qe_lib of_node_get cleanup
> [POWERPC] arch/powerpc/sysdev/cpm2_pic.c of_node_get cleanup
>
> Michael Neuling (1):
> [POWERPC] remove unused CPU_FTRS_POWER6X
>
> Michal Ostrowski (1):
> [POWERPC] Do not write virq back to PCI config space
>
> Nathan Lynch (3):
> [POWERPC] maple: improve CPC9x5 host bridge detection
> [POWERPC] Maple: don't override bus-range supplied by firmware
> [POWERPC] Maple: use mmio nvram
>
> Olaf Hering (1):
> [POWERPC] Update fixup_winbond_82c105 comment
>
> Olof Johansson (13):
> [POWERPC] Oprofile cleanup
> [POWERPC] Add PMC type to cputable
> [POWERPC] Introduce _SYSDEV_ATTR
> [POWERPC] PA6T PMC support
> [POWERPC] MPIC: support more than 256 sources
> [POWERPC] pasemi: UART udbg support
> [POWERPC] pasemi: Machine check handler
> [POWERPC] pasemi: Idle loops
> [POWERPC] pasemi: Implement restart
> [POWERPC] pasemi: SMP timebase sync
> [POWERPC] pasemi: Configure DMA controller interrupts
> [POWERPC] pasemi: iommu support
> [POWERPC] pasemi: defconfig
>
> Paul Gortmaker (1):
> [POWERPC] Select DEFAULT_UIMAGE for HPC-NET/8641
>
> Paul Mackerras (2):
> [POWERPC] Clear RI bit in MSR before restoring r13 when returning to userspace
> [POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor call
>
> Pavel Roskin (1):
> [POWERPC] Assign all PCI busses on G3 Blue & White
>
> Robert P. J. Day (2):
> [POWERPC] Fix apparent typo "CONFIG_SERIAL_CPM_SMC".
> [POWERPC] Add "is_power_of_2" checking to log2.h.
>
> Simon Vallet (1):
> [POWERPC] Add support for R_PPC_ADDR16_HI relocations
>
> Timur Tabi (1):
> [POWERPC] Fix array indexing error in rheap grow()
>
> Vitaly Bordug (10):
> [POWERPC] cpm_uart: OF-related fix for CPM1
> [POWERPC] 8xx: platform specific mmu updates
> [POWERPC] 8xx: generic 8xx code arch/powerpc port
> [POWERPC] 8xx: platform related changes to the fsl_soc
> [POWERPC] 8xx: powerpc port of core CPM PIC
> [POWERPC] 8xx: Add mpc885ads support and common mpc8xx files
> [POWERPC] Add mpc866ads board-specific bits to arch/powerpc
> [POWERPC] cpm2: CPM2 interrupt controller fix
> [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads
> [POWERPC] mpc8272ads: defconfig
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: patches in powerpc.git
2007-02-07 4:03 patches in powerpc.git Paul Mackerras
2007-02-07 4:14 ` Grant Likely
@ 2007-02-07 4:25 ` Olof Johansson
2007-02-07 4:55 ` Stephen Rothwell
` (6 subsequent siblings)
8 siblings, 0 replies; 22+ messages in thread
From: Olof Johansson @ 2007-02-07 4:25 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
On Wed, Feb 07, 2007 at 03:03:13PM +1100, Paul Mackerras wrote:
> The following is the list of commits that I have in the powerpc.git
> tree, and which I plan to ask Linus to pull tomorrow. If anyone
> thinks any of these should *not* go in, let me know quickly.
[...]
> [POWERPC] pasemi: Configure DMA controller interrupts
I agreed with Ben that this one should go in the driver instead, but I
didn't repost the series without it.
It's no big deal that it's in there right now, I'll back it out in the
same patch that adds it to the driver.
Thanks,
-Olof
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: patches in powerpc.git
2007-02-07 4:03 patches in powerpc.git Paul Mackerras
2007-02-07 4:14 ` Grant Likely
2007-02-07 4:25 ` Olof Johansson
@ 2007-02-07 4:55 ` Stephen Rothwell
2007-02-07 16:38 ` Will Schmidt
2007-02-07 6:38 ` Pavel Fedin
` (5 subsequent siblings)
8 siblings, 1 reply; 22+ messages in thread
From: Stephen Rothwell @ 2007-02-07 4:55 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 403 bytes --]
On Wed, 7 Feb 2007 15:03:13 +1100 Paul Mackerras <paulus@samba.org> wrote:
>
> If anyone has patches not listed here that they want in 2.6.21, please
> let me or the relevant sub-arch maintainer know.
How about "Fix ppc64's writing to struct file_operations" sent to you
yesterday by Andrew Morton.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: patches in powerpc.git
2007-02-07 4:55 ` Stephen Rothwell
@ 2007-02-07 16:38 ` Will Schmidt
2007-02-07 23:42 ` Stephen Rothwell
0 siblings, 1 reply; 22+ messages in thread
From: Will Schmidt @ 2007-02-07 16:38 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linuxppc-dev, Paul Mackerras
On Wed, 2007-07-02 at 15:55 +1100, Stephen Rothwell wrote:
> On Wed, 7 Feb 2007 15:03:13 +1100 Paul Mackerras <paulus@samba.org> wrote:
> >
> > If anyone has patches not listed here that they want in 2.6.21, please
> > let me or the relevant sub-arch maintainer know.
>
> How about "Fix ppc64's writing to struct file_operations" sent to you
> yesterday by Andrew Morton.
>
Is this the lparcfg fops .write changes that came across LKML
mid-January? I didnt notice any references to it here..
-Will
> --
> Cheers,
> Stephen Rothwell sfr@canb.auug.org.au
> http://www.canb.auug.org.au/~sfr/
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: patches in powerpc.git
2007-02-07 16:38 ` Will Schmidt
@ 2007-02-07 23:42 ` Stephen Rothwell
0 siblings, 0 replies; 22+ messages in thread
From: Stephen Rothwell @ 2007-02-07 23:42 UTC (permalink / raw)
To: will_schmidt; +Cc: linuxppc-dev, Paul Mackerras
On Wed, 07 Feb 2007 10:38:30 -0600 Will Schmidt <will_schmidt@vnet.ibm.com> wrote:
>
> On Wed, 2007-07-02 at 15:55 +1100, Stephen Rothwell wrote:
> > On Wed, 7 Feb 2007 15:03:13 +1100 Paul Mackerras <paulus@samba.org> wrote:
> > >
> > > If anyone has patches not listed here that they want in 2.6.21, please
> > > let me or the relevant sub-arch maintainer know.
> >
> > How about "Fix ppc64's writing to struct file_operations" sent to you
> > yesterday by Andrew Morton.
> >
>
> Is this the lparcfg fops .write changes that came across LKML
> mid-January? I didnt notice any references to it here..
Yep. Copy below.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
Subject: [patch 03/10] Fix ppc64's writing to struct file_operations
To: paulus@samba.org
Cc: benh@kernel.crashing.org, akpm@linux-foundation.org, sfr@canb.auug.org.au,
arjan@infradead.org
From: akpm@linux-foundation.org
Date: Mon, 05 Feb 2007 16:14:05 -0800
From: Stephen Rothwell <sfr@canb.auug.org.au>
In preparation for marking file_operations as const.
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/powerpc/kernel/lparcfg.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff -puN arch/powerpc/kernel/lparcfg.c~fix-ppc64s-writing-to-struct-file_operations arch/powerpc/kernel/lparcfg.c
--- a/arch/powerpc/kernel/lparcfg.c~fix-ppc64s-writing-to-struct-file_operations
+++ a/arch/powerpc/kernel/lparcfg.c
@@ -439,6 +439,10 @@ static ssize_t lparcfg_write(struct file
ssize_t retval = -ENOMEM;
+ if (!firmware_has_feature(FW_FEATURE_SPLPAR) ||
+ firmware_has_feature(FW_FEATURE_ISERIES))
+ return -EINVAL;
+
kbuf = kmalloc(count, GFP_KERNEL);
if (!kbuf)
goto out;
@@ -517,7 +521,7 @@ static int pseries_lparcfg_data(struct s
static ssize_t lparcfg_write(struct file *file, const char __user * buf,
size_t count, loff_t * off)
{
- return count;
+ return -EINVAL;
}
#endif /* CONFIG_PPC_PSERIES */
@@ -570,6 +574,7 @@ static int lparcfg_open(struct inode *in
struct file_operations lparcfg_fops = {
.owner = THIS_MODULE,
.read = seq_read,
+ .write = lparcfg_write,
.open = lparcfg_open,
.release = single_release,
};
@@ -581,10 +586,8 @@ int __init lparcfg_init(void)
/* Allow writing if we have FW_FEATURE_SPLPAR */
if (firmware_has_feature(FW_FEATURE_SPLPAR) &&
- !firmware_has_feature(FW_FEATURE_ISERIES)) {
- lparcfg_fops.write = lparcfg_write;
+ !firmware_has_feature(FW_FEATURE_ISERIES))
mode |= S_IWUSR;
- }
ent = create_proc_entry("ppc64/lparcfg", mode, NULL);
if (ent) {
_
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: patches in powerpc.git
2007-02-07 4:03 patches in powerpc.git Paul Mackerras
` (2 preceding siblings ...)
2007-02-07 4:55 ` Stephen Rothwell
@ 2007-02-07 6:38 ` Pavel Fedin
2007-02-07 15:22 ` Vitaly Bordug
2007-02-07 22:07 ` Paul Mackerras
2007-02-07 7:39 ` Olof Johansson
` (4 subsequent siblings)
8 siblings, 2 replies; 22+ messages in thread
From: Pavel Fedin @ 2007-02-07 6:38 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
Hello Paul,
Wednesday, February 7, 2007, 7:03:13 AM, you wrote:
> If anyone has patches not listed here that they want in 2.6.21, please
> let me or the relevant sub-arch maintainer know. I have put in all
> the patches I know about that don't seem to be still under discussion.
You've forgotten this one:
http://patchwork.ozlabs.org/linuxppc/patch?id=9215
It's well tested working code which has already been included for
old "ppc" target since 2.6.11. However it was lost again during
ppc64+ppc->powerpc transition (i see that "powerpc" target is based on
old "ppc64", not "ppc").
--
Best regards,
Pavel mailto:sonic_amiga@rambler.ru
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: patches in powerpc.git
2007-02-07 6:38 ` Pavel Fedin
@ 2007-02-07 15:22 ` Vitaly Bordug
2007-02-07 22:07 ` Paul Mackerras
1 sibling, 0 replies; 22+ messages in thread
From: Vitaly Bordug @ 2007-02-07 15:22 UTC (permalink / raw)
To: Pavel Fedin; +Cc: linuxppc-dev, Paul Mackerras
On Wed, 7 Feb 2007 09:38:00 +0300
Pavel Fedin <sonic_amiga@rambler.ru> wrote:
> Hello Paul,
>
> Wednesday, February 7, 2007, 7:03:13 AM, you wrote:
>
> > If anyone has patches not listed here that they want in 2.6.21, please
> > let me or the relevant sub-arch maintainer know. I have put in all
> > the patches I know about that don't seem to be still under discussion.
>
> You've forgotten this one:
>
> http://patchwork.ozlabs.org/linuxppc/patch?id=9215
>
> It's well tested working code which has already been included for
> old "ppc" target since 2.6.11. However it was lost again during
> ppc64+ppc->powerpc transition (i see that "powerpc" target is based on
> old "ppc64", not "ppc").
>
Oh, iirc, Paul asked you to resubmit with tabs/spaces fixed that time.
I guess it's not too late so far to do that...
--
Sincerely,
Vitaly
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: patches in powerpc.git
2007-02-07 6:38 ` Pavel Fedin
2007-02-07 15:22 ` Vitaly Bordug
@ 2007-02-07 22:07 ` Paul Mackerras
1 sibling, 0 replies; 22+ messages in thread
From: Paul Mackerras @ 2007-02-07 22:07 UTC (permalink / raw)
To: Pavel Fedin; +Cc: linuxppc-dev
Pavel Fedin writes:
> You've forgotten this one:
>
> http://patchwork.ozlabs.org/linuxppc/patch?id=9215
Thanks, but actually I didn't forget it; I dropped it because your
mailer broke the whitespace. If you re-send it with a decent mailer I
will consider it.
Paul.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: patches in powerpc.git
2007-02-07 4:03 patches in powerpc.git Paul Mackerras
` (3 preceding siblings ...)
2007-02-07 6:38 ` Pavel Fedin
@ 2007-02-07 7:39 ` Olof Johansson
2007-02-07 12:18 ` Johannes Berg
` (3 subsequent siblings)
8 siblings, 0 replies; 22+ messages in thread
From: Olof Johansson @ 2007-02-07 7:39 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
Hi,
On Wed, Feb 07, 2007 at 03:03:13PM +1100, Paul Mackerras wrote:
> Paul Mackerras (2):
> [POWERPC] Clear RI bit in MSR before restoring r13 when returning to userspace
> [POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor call
On the H_BULK_REMOVE change: Does it show much gains on fork/exit-heavy
workloads?
-Olof
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: patches in powerpc.git
2007-02-07 4:03 patches in powerpc.git Paul Mackerras
` (4 preceding siblings ...)
2007-02-07 7:39 ` Olof Johansson
@ 2007-02-07 12:18 ` Johannes Berg
2007-02-07 16:11 ` Geert Uytterhoeven
` (2 subsequent siblings)
8 siblings, 0 replies; 22+ messages in thread
From: Johannes Berg @ 2007-02-07 12:18 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 848 bytes --]
On Wed, 2007-02-07 at 15:03 +1100, Paul Mackerras wrote:
> If anyone has patches not listed here that they want in 2.6.21, please
> let me or the relevant sub-arch maintainer know. I have put in all
> the patches I know about that don't seem to be still under
> discussion.
I'd love to have some of the prereq patches for suspend on G5 go in, as
well as the IRQ comment fix I've been carrying around.
The ones that I think are ready to go are:
* powerpc: fix comment in kernel/irq.c
obvious comment change
* powermac: clean up PIC initialisation code
just some code shuffling, tested on powermac and powerbook
* windfarm: don't die on suspend thread signal
obvious fix
* powermac: generic time suspend/resume code
really should be named "powerpc: ...", tested on powermac and
powerbook
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 190 bytes --]
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: patches in powerpc.git
2007-02-07 4:03 patches in powerpc.git Paul Mackerras
` (5 preceding siblings ...)
2007-02-07 12:18 ` Johannes Berg
@ 2007-02-07 16:11 ` Geert Uytterhoeven
2007-02-08 0:03 ` Paul Mackerras
2007-02-07 20:10 ` Guennadi Liakhovetski
2007-02-07 21:10 ` Program Check (700) in lpar.c:551 was: " Will Schmidt
8 siblings, 1 reply; 22+ messages in thread
From: Geert Uytterhoeven @ 2007-02-07 16:11 UTC (permalink / raw)
To: Paul Mackerras; +Cc: Linux/PPC Development, James Simmons
Hi Paul,
On Wed, 7 Feb 2007, Paul Mackerras wrote:
> If anyone has patches not listed here that they want in 2.6.21, please
> let me or the relevant sub-arch maintainer know. I have put in all
> the patches I know about that don't seem to be still under discussion.
Can you please tell me your position w.r.t. the PS3 av/fb patches?
Do you want to handle some of them, or do you want James (or perhaps Andrew) to
handle them?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- Sony Network and Software Technology Center Europe (NSCE)
Geert.Uytterhoeven@sonycom.com ------- The Corporate Village, Da Vincilaan 7-D1
Voice +32-2-7008453 Fax +32-2-7008622 ---------------- B-1935 Zaventem, Belgium
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: patches in powerpc.git
2007-02-07 16:11 ` Geert Uytterhoeven
@ 2007-02-08 0:03 ` Paul Mackerras
2007-02-08 14:02 ` Geert Uytterhoeven
0 siblings, 1 reply; 22+ messages in thread
From: Paul Mackerras @ 2007-02-08 0:03 UTC (permalink / raw)
To: Geert Uytterhoeven; +Cc: Linux/PPC Development, James Simmons
Geert Uytterhoeven writes:
> Can you please tell me your position w.r.t. the PS3 av/fb patches?
> Do you want to handle some of them, or do you want James (or perhaps Andrew) to
> handle them?
It's up to Andrew really. I had been assuming James or Andrew would
take care of them, but if they don't want to, then I can do it.
Paul.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: patches in powerpc.git
2007-02-08 0:03 ` Paul Mackerras
@ 2007-02-08 14:02 ` Geert Uytterhoeven
2007-02-08 18:42 ` James Simmons
0 siblings, 1 reply; 22+ messages in thread
From: Geert Uytterhoeven @ 2007-02-08 14:02 UTC (permalink / raw)
To: Paul Mackerras, Andrew Morton; +Cc: Linux/PPC Development, James Simmons
On Thu, 8 Feb 2007, Paul Mackerras wrote:
> Geert Uytterhoeven writes:
> > Can you please tell me your position w.r.t. the PS3 av/fb patches?
> > Do you want to handle some of them, or do you want James (or perhaps Andrew) to
> > handle them?
>
> It's up to Andrew really. I had been assuming James or Andrew would
> take care of them, but if they don't want to, then I can do it.
OK, I sent them to Andrew.
Andrew: please apply. Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- Sony Network and Software Technology Center Europe (NSCE)
Geert.Uytterhoeven@sonycom.com ------- The Corporate Village, Da Vincilaan 7-D1
Voice +32-2-7008453 Fax +32-2-7008622 ---------------- B-1935 Zaventem, Belgium
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: patches in powerpc.git
2007-02-08 14:02 ` Geert Uytterhoeven
@ 2007-02-08 18:42 ` James Simmons
0 siblings, 0 replies; 22+ messages in thread
From: James Simmons @ 2007-02-08 18:42 UTC (permalink / raw)
To: Geert Uytterhoeven; +Cc: Linux/PPC Development, Andrew Morton, Paul Mackerras
> On Thu, 8 Feb 2007, Paul Mackerras wrote:
> > Geert Uytterhoeven writes:
> > > Can you please tell me your position w.r.t. the PS3 av/fb patches?
> > > Do you want to handle some of them, or do you want James (or perhaps Andrew) to
> > > handle them?
> >
> > It's up to Andrew really. I had been assuming James or Andrew would
> > take care of them, but if they don't want to, then I can do it.
>
> OK, I sent them to Andrew.
>
> Andrew: please apply. Thanks!
>
> Gr{oetje,eeting}s,
The patch are good. Andrew please apply.
Acked-By: James Simmons <jsimmons@infradead.org>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: patches in powerpc.git
2007-02-07 4:03 patches in powerpc.git Paul Mackerras
` (6 preceding siblings ...)
2007-02-07 16:11 ` Geert Uytterhoeven
@ 2007-02-07 20:10 ` Guennadi Liakhovetski
2007-02-07 22:24 ` Paul Mackerras
2007-02-07 21:10 ` Program Check (700) in lpar.c:551 was: " Will Schmidt
8 siblings, 1 reply; 22+ messages in thread
From: Guennadi Liakhovetski @ 2007-02-07 20:10 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
On Wed, 7 Feb 2007, Paul Mackerras wrote:
> The following is the list of commits that I have in the powerpc.git
> tree, and which I plan to ask Linus to pull tomorrow. If anyone
> thinks any of these should *not* go in, let me know quickly.
>
> If anyone has patches not listed here that they want in 2.6.21, please
> let me or the relevant sub-arch maintainer know. I have put in all
> the patches I know about that don't seem to be still under discussion.
Paul, I think, you missed this one:
http://ozlabs.org/pipermail/linuxppc-dev/2007-January/030718.html
Please, apply or comment:-)
Thanks
Guennadi
---
Guennadi Liakhovetski
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: patches in powerpc.git
2007-02-07 20:10 ` Guennadi Liakhovetski
@ 2007-02-07 22:24 ` Paul Mackerras
2007-02-07 22:49 ` Guennadi Liakhovetski
0 siblings, 1 reply; 22+ messages in thread
From: Paul Mackerras @ 2007-02-07 22:24 UTC (permalink / raw)
To: Guennadi Liakhovetski; +Cc: linuxppc-dev
Guennadi Liakhovetski writes:
> Paul, I think, you missed this one:
>
> http://ozlabs.org/pipermail/linuxppc-dev/2007-January/030718.html
>
> Please, apply or comment:-)
Ah yes. It's easy to miss a patch when the subject line starts with
"Re:". :) I'll put it in.
Paul.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: patches in powerpc.git
2007-02-07 22:24 ` Paul Mackerras
@ 2007-02-07 22:49 ` Guennadi Liakhovetski
2007-02-08 0:01 ` Kumar Gala
0 siblings, 1 reply; 22+ messages in thread
From: Guennadi Liakhovetski @ 2007-02-07 22:49 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
On Thu, 8 Feb 2007, Paul Mackerras wrote:
> Guennadi Liakhovetski writes:
>
> > Paul, I think, you missed this one:
> >
> > http://ozlabs.org/pipermail/linuxppc-dev/2007-January/030718.html
> >
> > Please, apply or comment:-)
>
> Ah yes. It's easy to miss a patch when the subject line starts with
> "Re:". :) I'll put it in.
I'll __try__ to remember that:-)
Thanks
Guennadi
---
Guennadi Liakhovetski
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: patches in powerpc.git
2007-02-07 22:49 ` Guennadi Liakhovetski
@ 2007-02-08 0:01 ` Kumar Gala
0 siblings, 0 replies; 22+ messages in thread
From: Kumar Gala @ 2007-02-08 0:01 UTC (permalink / raw)
To: Guennadi Liakhovetski; +Cc: linuxppc-dev, Paul Mackerras
On Feb 7, 2007, at 4:49 PM, Guennadi Liakhovetski wrote:
> On Thu, 8 Feb 2007, Paul Mackerras wrote:
>
>> Guennadi Liakhovetski writes:
>>
>>> Paul, I think, you missed this one:
>>>
>>> http://ozlabs.org/pipermail/linuxppc-dev/2007-January/030718.html
>>>
>>> Please, apply or comment:-)
>>
>> Ah yes. It's easy to miss a patch when the subject line starts with
>> "Re:". :) I'll put it in.
>
> I'll __try__ to remember that:-)
Also, I'll try to grab these patches in the future and have them in
my tree.
- k
^ permalink raw reply [flat|nested] 22+ messages in thread
* Program Check (700) in lpar.c:551 was: Re: patches in powerpc.git
2007-02-07 4:03 patches in powerpc.git Paul Mackerras
` (7 preceding siblings ...)
2007-02-07 20:10 ` Guennadi Liakhovetski
@ 2007-02-07 21:10 ` Will Schmidt
2007-02-07 21:16 ` Benjamin Herrenschmidt
8 siblings, 1 reply; 22+ messages in thread
From: Will Schmidt @ 2007-02-07 21:10 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
On Wed, 2007-07-02 at 15:03 +1100, Paul Mackerras wrote:
> [POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor call
looks like this one ( f03e64f2ca6ee3d0b7824536b1940497701fe766 ) makes
my JS20 tip over. I backed it just that patch and booted
successfully, but havnt done any more poking than that.
console output follows:
-----------------------------------------------------
ppc64_pft_size = 0x19
physicalMemorySize = 0x7c000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0x0000000000000000
htab_hash_mask = 0x3ffff
-----------------------------------------------------
PPC64 nvram contains 16384 bytes
Zone PFN ranges:
DMA 0 -> 507904
Normal 507904 -> 507904
early_node_map[1] active PFN ranges
0: 0 -> 507904
[boot]0015 Setup Done
Built 1 zonelists. Total pages: 500960
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
freeing bootmem node 0
Memory: 1986112k/2031616k available (6436k kernel code, 45504k reserved,
1392k data, 535k bss, 256k init)
Mount-cache hash table entries: 256
Processor 1 found.
Brought up 2 CPUs
------------[ cut here ]------------
kernel BUG
at /kernels/powerpc.git.test/arch/powerpc/platforms/pseries/lpar.c:551!
cpu 0x1: Vector: 700 (Program Check) at [c00000000264f280]
pc: c000000000035744: .pSeries_lpar_flush_hash_range+0x12c/0x228
lr: c000000000035738: .pSeries_lpar_flush_hash_range+0x120/0x228
sp: c00000000264f500
msr: 8000000000029032
current = 0xc00000000ffdc810
paca = 0xc00000000066ce00
pid = 1, comm = swapper
kernel BUG
at /kernels/powerpc.git.test/arch/powerpc/platforms/pseries/lpar.c:551!
enter ? for help
[c00000000264f500] c0000000000357fc .pSeries_lpar_flush_hash_range
+0x1e4/0x228 (unreliable)
[c00000000264f620] c00000000002ce04 .flush_hash_range+0x50/0xb8
[c00000000264f6c0] c00000000002d948 .__flush_tlb_pending+0xec/0x114
[c00000000264f770] c0000000000a71ec .unmap_vm_area+0x1a8/0x270
[c00000000264f840] c0000000000a7314 .remove_vm_area+0x60/0xb8
[c00000000264f8d0] c0000000000a73bc .__vunmap+0x50/0x100
[c00000000264f960] c000000000048a0c .build_sched_domains+0xdd8/0x10a0
[c00000000264fd90] c000000000048d10 .arch_init_sched_domains+0x3c/0x54
[c00000000264fe30] c00000000061e938 .sched_init_smp+0x2c/0xe0
[c00000000264fec0] c000000000009310 .init+0x144/0x3b8
[c00000000264ff90] c0000000000253b8 .kernel_thread+0x4c/0x68
1:mon>
1:mon> r
R00 = fffffffffffffffd R16 = 4000000001c00000
R01 = c00000000264f500 R17 = c00000000056c708
R02 = c0000000007a5d50 R18 = 0000000000000000
R03 = 0000000000000001 R19 = c00000000264fe00
R04 = c000000002395018 R20 = 0000000000a00000
R05 = 000000000000002d R21 = c0000000007d8000
R06 = 420000000004d7a0 R22 = 00000000000000c0
R07 = 000000000000002d R23 = 0000000000000001
R08 = 420000000004d7b8 R24 = 0000000000000001
R09 = 0000f09b89af5000 R25 = 0000000000000000
R10 = 420000000004d7b0 R26 = 0000000000000000
R11 = 0000f09b89af5000 R27 = 0000000000000003
R12 = c00000000264f580 R28 = c00000000264f5b0
R13 = c00000000066ce00 R29 = 0000000000000030
R14 = fffffffffff81980 R30 = 4200000000000000
R15 = c00000000056dd20 R31 = c000000002393310
pc = c000000000035744 .pSeries_lpar_flush_hash_range+0x12c/0x228
lr = c000000000035738 .pSeries_lpar_flush_hash_range+0x120/0x228
msr = 8000000000029032 cr = 24000022
ctr = 00000000000246fc xer = 00000000200fffff trap = 700
1:mon>
-Will
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: Program Check (700) in lpar.c:551 was: Re: patches in powerpc.git
2007-02-07 21:10 ` Program Check (700) in lpar.c:551 was: " Will Schmidt
@ 2007-02-07 21:16 ` Benjamin Herrenschmidt
2007-02-07 21:26 ` Benjamin Herrenschmidt
0 siblings, 1 reply; 22+ messages in thread
From: Benjamin Herrenschmidt @ 2007-02-07 21:16 UTC (permalink / raw)
To: will_schmidt; +Cc: linuxppc-dev, Paul Mackerras
On Wed, 2007-02-07 at 15:10 -0600, Will Schmidt wrote:
> On Wed, 2007-07-02 at 15:03 +1100, Paul Mackerras wrote:
> > [POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor call
>
>
> looks like this one ( f03e64f2ca6ee3d0b7824536b1940497701fe766 ) makes
> my JS20 tip over. I backed it just that patch and booted
> successfully, but havnt done any more poking than that.
What about "di c000000000035744" ?
Would it be possible that H_BULK_REMOVE isn't implemented by the js20's
firmware ?
Ben.
> console output follows:
> -----------------------------------------------------
> ppc64_pft_size = 0x19
> physicalMemorySize = 0x7c000000
> ppc64_caches.dcache_line_size = 0x80
> ppc64_caches.icache_line_size = 0x80
> htab_address = 0x0000000000000000
> htab_hash_mask = 0x3ffff
> -----------------------------------------------------
> PPC64 nvram contains 16384 bytes
> Zone PFN ranges:
> DMA 0 -> 507904
> Normal 507904 -> 507904
> early_node_map[1] active PFN ranges
> 0: 0 -> 507904
> [boot]0015 Setup Done
> Built 1 zonelists. Total pages: 500960
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> freeing bootmem node 0
> Memory: 1986112k/2031616k available (6436k kernel code, 45504k reserved,
> 1392k data, 535k bss, 256k init)
> Mount-cache hash table entries: 256
> Processor 1 found.
> Brought up 2 CPUs
> ------------[ cut here ]------------
> kernel BUG
> at /kernels/powerpc.git.test/arch/powerpc/platforms/pseries/lpar.c:551!
> cpu 0x1: Vector: 700 (Program Check) at [c00000000264f280]
> pc: c000000000035744: .pSeries_lpar_flush_hash_range+0x12c/0x228
> lr: c000000000035738: .pSeries_lpar_flush_hash_range+0x120/0x228
> sp: c00000000264f500
> msr: 8000000000029032
> current = 0xc00000000ffdc810
> paca = 0xc00000000066ce00
> pid = 1, comm = swapper
> kernel BUG
> at /kernels/powerpc.git.test/arch/powerpc/platforms/pseries/lpar.c:551!
> enter ? for help
> [c00000000264f500] c0000000000357fc .pSeries_lpar_flush_hash_range
> +0x1e4/0x228 (unreliable)
> [c00000000264f620] c00000000002ce04 .flush_hash_range+0x50/0xb8
> [c00000000264f6c0] c00000000002d948 .__flush_tlb_pending+0xec/0x114
> [c00000000264f770] c0000000000a71ec .unmap_vm_area+0x1a8/0x270
> [c00000000264f840] c0000000000a7314 .remove_vm_area+0x60/0xb8
> [c00000000264f8d0] c0000000000a73bc .__vunmap+0x50/0x100
> [c00000000264f960] c000000000048a0c .build_sched_domains+0xdd8/0x10a0
> [c00000000264fd90] c000000000048d10 .arch_init_sched_domains+0x3c/0x54
> [c00000000264fe30] c00000000061e938 .sched_init_smp+0x2c/0xe0
> [c00000000264fec0] c000000000009310 .init+0x144/0x3b8
> [c00000000264ff90] c0000000000253b8 .kernel_thread+0x4c/0x68
> 1:mon>
> 1:mon> r
> R00 = fffffffffffffffd R16 = 4000000001c00000
> R01 = c00000000264f500 R17 = c00000000056c708
> R02 = c0000000007a5d50 R18 = 0000000000000000
> R03 = 0000000000000001 R19 = c00000000264fe00
> R04 = c000000002395018 R20 = 0000000000a00000
> R05 = 000000000000002d R21 = c0000000007d8000
> R06 = 420000000004d7a0 R22 = 00000000000000c0
> R07 = 000000000000002d R23 = 0000000000000001
> R08 = 420000000004d7b8 R24 = 0000000000000001
> R09 = 0000f09b89af5000 R25 = 0000000000000000
> R10 = 420000000004d7b0 R26 = 0000000000000000
> R11 = 0000f09b89af5000 R27 = 0000000000000003
> R12 = c00000000264f580 R28 = c00000000264f5b0
> R13 = c00000000066ce00 R29 = 0000000000000030
> R14 = fffffffffff81980 R30 = 4200000000000000
> R15 = c00000000056dd20 R31 = c000000002393310
> pc = c000000000035744 .pSeries_lpar_flush_hash_range+0x12c/0x228
> lr = c000000000035738 .pSeries_lpar_flush_hash_range+0x120/0x228
> msr = 8000000000029032 cr = 24000022
> ctr = 00000000000246fc xer = 00000000200fffff trap = 700
> 1:mon>
>
> -Will
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Program Check (700) in lpar.c:551 was: Re: patches in powerpc.git
2007-02-07 21:16 ` Benjamin Herrenschmidt
@ 2007-02-07 21:26 ` Benjamin Herrenschmidt
0 siblings, 0 replies; 22+ messages in thread
From: Benjamin Herrenschmidt @ 2007-02-07 21:26 UTC (permalink / raw)
To: will_schmidt; +Cc: linuxppc-dev, Paul Mackerras
On Thu, 2007-02-08 at 08:16 +1100, Benjamin Herrenschmidt wrote:
> On Wed, 2007-02-07 at 15:10 -0600, Will Schmidt wrote:
> > On Wed, 2007-07-02 at 15:03 +1100, Paul Mackerras wrote:
> > > [POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor call
> >
> >
> > looks like this one ( f03e64f2ca6ee3d0b7824536b1940497701fe766 ) makes
> > my JS20 tip over. I backed it just that patch and booted
> > successfully, but havnt done any more poking than that.
>
> What about "di c000000000035744" ?
>
> Would it be possible that H_BULK_REMOVE isn't implemented by the js20's
> firmware ?
I talked to Mark Hack and indeed, it's not supported on js20. I asked
him the proper way to verify if it's supported via
ibm,hypertas-functions, specifically the hcall-bulk group.
Ben.
^ permalink raw reply [flat|nested] 22+ messages in thread