From: Jon Loeliger <jdl@freescale.com>
To: "linuxppc-dev@ozlabs.org" <linuxppc-dev@ozlabs.org>
Subject: [RFC 2/3] MPC8544 DTS file
Date: Wed, 07 Mar 2007 15:14:24 -0600 [thread overview]
Message-ID: <1173302064.23776.185.camel@ld0161-tx32> (raw)
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
new file mode 100644
index 0000000..7eb7ccc
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -0,0 +1,352 @@
+/*
+ * MPC8544 DS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "MPC8544DS";
+ compatible = "mpc85xx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8544@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 20000000>; // 512M at 0x0
+ };
+
+ soc8544@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>; // Filled out by uboot.
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <2b 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <4a 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <4a 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <1d 2 1e 2 22 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
+ };
+
+ ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <26000 1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <1f 2 20 2 21 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <0>;
+ interrupts = <2a 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <0>;
+ interrupts = <2a 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ pci@8000 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 J17 Slot 1 */
+ 8800 0 0 1 &mpic 42 1
+ 8800 0 0 2 &mpic 43 1
+ 8800 0 0 3 &mpic 44 1
+ 8800 0 0 4 &mpic 41 1
+
+ /* IDSEL 0x12 J16 Slot 2 */
+
+ 9000 0 0 1 &mpic 43 1
+ 9000 0 0 2 &mpic 44 1
+ 9000 0 0 3 &mpic 42 1
+ 9000 0 0 4 &mpic 41 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00800000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pci@a000 {
+ compatible = "85xx";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <a000 1000>;
+ bus-range = <3 ff>;
+ ranges = <02000000 0 90000000 90000000 0 10000000
+ 01000000 0 00000000 e3000000 0 00080000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <19 2>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1
+ 0000 0 0 2 &mpic 41 1
+ 0000 0 0 3 &mpic 42 1
+ 0000 0 0 4 &mpic 43 1
+ >;
+ };
+
+ pci@9000 {
+ compatible = "85xx";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <9000 1000>;
+ bus-range = <4 ff>;
+ ranges = <02000000 0 a0000000 a0000000 0 10000000
+ 01000000 0 00000000 e2800000 0 00080000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <1a 2>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 44 1
+ 0000 0 0 2 &mpic 45 1
+ 0000 0 0 3 &mpic 46 1
+ 0000 0 0 4 &mpic 47 1
+ >;
+ };
+
+ pci@b000 {
+ compatible = "85xx";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <b000 1000>;
+ bus-range = <5 ff>;
+ ranges = <02000000 0 b0000000 b0000000 0 10000000
+ 01000000 0 00000000 e3800000 0 00800000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <1b 2>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ // IDSEL 0x11
+ 8800 0 0 1 &i8259 3 2
+ 8800 0 0 2 &i8259 4 2
+ 8800 0 0 3 &i8259 5 2
+ 8800 0 0 4 &i8259 6 2
+
+ // IDSEL 0x12
+ 9000 0 0 1 &i8259 4 2
+ 9000 0 0 2 &i8259 5 2
+ 9000 0 0 3 &i8259 6 2
+ 9000 0 0 4 &i8259 3 2
+
+ // IDSEL 0x13
+ 9800 0 0 1 &i8259 0 0
+ 9800 0 0 2 &i8259 0 0
+ 9800 0 0 3 &i8259 0 0
+ 9800 0 0 4 &i8259 0 0
+
+ // IDSEL 0x14
+ a000 0 0 1 &i8259 0 0
+ a000 0 0 2 &i8259 0 0
+ a000 0 0 3 &i8259 0 0
+ a000 0 0 4 &i8259 0 0
+
+ // IDSEL 0x15
+ a800 0 0 1 &i8259 0 0
+ a800 0 0 2 &i8259 0 0
+ a800 0 0 3 &i8259 0 0
+ a800 0 0 4 &i8259 0 0
+
+ // IDSEL 0x16
+ b000 0 0 1 &i8259 0 0
+ b000 0 0 2 &i8259 0 0
+ b000 0 0 3 &i8259 0 0
+ b000 0 0 4 &i8259 0 0
+
+ // IDSEL 0x17
+ b800 0 0 1 &i8259 0 0
+ b800 0 0 2 &i8259 0 0
+ b800 0 0 3 &i8259 0 0
+ b800 0 0 4 &i8259 0 0
+
+ // IDSEL 0x18
+ c000 0 0 1 &i8259 0 0
+ c000 0 0 2 &i8259 0 0
+ c000 0 0 3 &i8259 0 0
+ c000 0 0 4 &i8259 0 0
+
+ // IDSEL 0x19
+ c800 0 0 1 &i8259 0 0
+ c800 0 0 2 &i8259 0 0
+ c800 0 0 3 &i8259 0 0
+ c800 0 0 4 &i8259 0 0
+
+ // IDSEL 0x1a
+ d000 0 0 1 &i8259 6 2
+ d000 0 0 2 &i8259 3 2
+ d000 0 0 3 &i8259 4 2
+ d000 0 0 4 &i8259 5 2
+
+ // IDSEL 0x1b
+ d800 0 0 1 &i8259 5 2
+ d800 0 0 2 &i8259 0 0
+ d800 0 0 3 &i8259 0 0
+ d800 0 0 4 &i8259 0 0
+
+ // IDSEL 0x1c USB
+ e000 0 0 1 &i8259 9 2
+ e000 0 0 2 &i8259 a 2
+ e000 0 0 3 &i8259 c 2
+ e000 0 0 4 &i8259 7 2
+
+ // IDSEL 0x1d Audio
+ e800 0 0 1 &i8259 9 2
+ e800 0 0 2 &i8259 a 2
+ e800 0 0 3 &i8259 b 2
+ e800 0 0 4 &i8259 0 0
+
+ // IDSEL 0x1e Legacy
+ f000 0 0 1 &i8259 c 2
+ f000 0 0 2 &i8259 0 0
+ f000 0 0 3 &i8259 0 0
+ f000 0 0 4 &i8259 0 0
+
+ // IDSEL 0x1f IDE/SATA
+ f800 0 0 1 &i8259 6 2
+ f800 0 0 2 &i8259 0 0
+ f800 0 0 3 &i8259 0 0
+ f800 0 0 4 &i8259 0 0
+ >;
+
+ i8259: i8259@4d0 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ compatible = "chrp,iic";
+ big-endian;
+ interrupts = <49 2>;
+ interrupt-parent = <&mpic>;
+ };
+ };
+
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+
+ interrupts = <
+ 10 2 11 2 12 2 13 2
+ 14 2 15 2 16 2 17 2
+ 18 2 19 2 1a 2 1b 2
+ 1c 2 1d 2 1e 2 1f 2
+ 20 2 21 2 22 2 23 2
+ 24 2 25 2 26 2 27 2
+ 28 2 29 2 2a 2 2b 2
+ 2c 2 2d 2 2e 2 2f 2
+ 30 2 31 2 32 2 33 2
+ 34 2 35 2 36 2 37 2
+ 38 2 39 2 2a 2 3b 2
+ 3c 2 3d 2 3e 2 3f 2
+ 48 1 49 2 4a 1
+ >;
+
+ interrupt-parent = <&mpic>;
+ };
+ };
+};
next reply other threads:[~2007-03-07 21:14 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-07 21:14 Jon Loeliger [this message]
2007-03-08 4:39 ` [RFC 2/3] MPC8544 DTS file Kumar Gala
2007-03-08 19:03 ` Jon Loeliger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1173302064.23776.185.camel@ld0161-tx32 \
--to=jdl@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).