From: Michael Ellerman <michael@ellerman.id.au>
To: will_schmidt@vnet.ibm.com
Cc: ppcdev <linuxppc-dev@ozlabs.org>, Paul Mackerras <paulus@samba.org>
Subject: Re: [PATCH 1/2] hvc_console polling mode timer backoff
Date: Wed, 18 Apr 2007 16:09:51 +1000 [thread overview]
Message-ID: <1176876591.4987.44.camel@concordia.ozlabs.ibm.com> (raw)
In-Reply-To: <1176821087.28514.145.camel@farscape.rchland.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 3068 bytes --]
On Tue, 2007-04-17 at 09:44 -0500, Will Schmidt wrote:
> Paulus, I think this is ready to go, please apply, thanks.
>
>
>
> Add a back-off mechanism to hvc_console's polling logic. This change
> drops the timers/second ratio from ~90 to ~1/2 while the console is
> idle.
> This change is most noticeable when watching /proc/timer_stats output.
>
> This only affects when the hvc_console is running in poll mode, i.e.
> power4 and cell systems.
>
> I've tested on Power4, Michael Ellerman has both contributed to the
> patch and tested on cell.
>
> Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
> cc: Michael Ellerman <michael@ellerman.id.au>
That should probably be:
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
cheers
> ---
> diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> index a0a88aa..fc9bc77 100644
> --- a/drivers/char/hvc_console.c
> +++ b/drivers/char/hvc_console.c
> @@ -47,8 +47,6 @@ #include "hvc_console.h"
> #define HVC_MAJOR 229
> #define HVC_MINOR 0
>
> -#define TIMEOUT (10)
> -
> /*
> * Wait this long per iteration while trying to push buffered data to the
> * hypervisor before allowing the tty to complete a close operation.
> @@ -550,6 +548,18 @@ static int hvc_chars_in_buffer(struct tt
> return hp->n_outbuf;
> }
>
> +/*
> + * timeout will vary between the MIN and MAX values defined here. By default
> + * and during console activity we will use a default MIN_TIMEOUT of 10. When
> + * the console is idle, we increase the timeout value on each pass through
> + * msleep until we reach the max. This may be noticeable as a brief (average
> + * one second) delay on the console before the console responds to input when
> + * there has been no input for some time.
> + */
> +#define MIN_TIMEOUT (10)
> +#define MAX_TIMEOUT (2000)
> +static u32 timeout = MIN_TIMEOUT;
> +
> #define HVC_POLL_READ 0x00000001
> #define HVC_POLL_WRITE 0x00000002
>
> @@ -642,9 +652,14 @@ #endif /* CONFIG_MAGIC_SYSRQ */
> bail:
> spin_unlock_irqrestore(&hp->lock, flags);
>
> - if (read_total)
> + if (read_total) {
> + /* Activity is occurring, so reset the polling backoff value to
> + a minimum for performance. */
> + timeout = MIN_TIMEOUT;
> +
> tty_flip_buffer_push(tty);
> -
> + }
> +
> return poll_mask;
> }
>
> @@ -688,8 +703,12 @@ int khvcd(void *unused)
> if (!hvc_kicked) {
> if (poll_mask == 0)
> schedule();
> - else
> - msleep_interruptible(TIMEOUT);
> + else {
> + if (timeout < MAX_TIMEOUT)
> + timeout += (timeout >> 6) + 1;
> +
> + msleep_interruptible(timeout);
> + }
> }
> __set_current_state(TASK_RUNNING);
> } while (!kthread_should_stop());
>
>
>
>
--
Michael Ellerman
OzLabs, IBM Australia Development Lab
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)
We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2007-04-18 6:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-17 14:44 [PATCH 1/2] hvc_console polling mode timer backoff Will Schmidt
2007-04-17 14:54 ` [PATCH 2/2] hvc_console typo fixes Will Schmidt
2007-04-18 6:09 ` Michael Ellerman [this message]
2007-04-18 19:22 ` [PATCH 1/2] hvc_console polling mode timer backoff Linas Vepstas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1176876591.4987.44.camel@concordia.ozlabs.ibm.com \
--to=michael@ellerman.id.au \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
--cc=will_schmidt@vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).