From: Josh Boyer <jwboyer@linux.vnet.ibm.com>
To: paulus@samba.org
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH v4 1/7] Add tsi108_pci.h for common PCI functions
Date: Mon, 07 May 2007 16:25:22 -0500 [thread overview]
Message-ID: <1178573122.2990.199.camel@zod.rchland.ibm.com> (raw)
In-Reply-To: <1178572962.2990.197.camel@zod.rchland.ibm.com>
Add a header file for the common PCI routines used for the TSI bridge
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 5 --
arch/powerpc/sysdev/tsi108_pci.c | 1
include/asm-powerpc/tsi108_pci.h | 45 ++++++++++++++++++++++
3 files changed, 47 insertions(+), 4 deletions(-)
--- linux-2.6.orig/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ linux-2.6/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -41,6 +41,7 @@
#include <asm/reg.h>
#include <mm/mmu_decl.h>
#include "mpc7448_hpc2.h"
+#include <asm/tsi108_pci.h>
#include <asm/tsi108_irq.h>
#include <asm/mpic.h>
@@ -57,10 +58,7 @@ isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE
pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
#endif
-extern int tsi108_setup_pci(struct device_node *dev);
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
-extern void tsi108_pci_int_init(struct device_node *node);
-extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
{
@@ -210,7 +208,6 @@ static int __init mpc7448_hpc2_probe(voi
static int mpc7448_machine_check_exception(struct pt_regs *regs)
{
- extern void tsi108_clear_pci_cfg_error(void);
const struct exception_table_entry *entry;
/* Are we prepared to handle this fault */
--- linux-2.6.orig/arch/powerpc/sysdev/tsi108_pci.c
+++ linux-2.6/arch/powerpc/sysdev/tsi108_pci.c
@@ -35,6 +35,7 @@
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/tsi108.h>
+#include <asm/tsi108_pci.h>
#include <asm/tsi108_irq.h>
#include <asm/prom.h>
--- /dev/null
+++ linux-2.6/include/asm-powerpc/tsi108_pci.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2007 IBM Corp
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_PPC_TSI108_PCI_H
+#define _ASM_PPC_TSI108_PCI_H
+
+#include <asm/tsi108.h>
+
+/* Register definitions */
+#define TSI108_PCI_P2O_BAR0 (TSI108_PCI_OFFSET + 0x10)
+#define TSI108_PCI_P2O_BAR0_UPPER (TSI108_PCI_OFFSET + 0x14)
+#define TSI108_PCI_P2O_BAR2 (TSI108_PCI_OFFSET + 0x18)
+#define TSI108_PCI_P2O_BAR2_UPPER (TSI108_PCI_OFFSET + 0x1c)
+#define TSI108_PCI_P2O_PAGE_SIZES (TSI108_PCI_OFFSET + 0x4c)
+#define TSI108_PCI_PFAB_BAR0 (TSI108_PCI_OFFSET + 0x204)
+#define TSI108_PCI_PFAB_BAR0_UPPER (TSI108_PCI_OFFSET + 0x208)
+#define TSI108_PCI_PFAB_IO (TSI108_PCI_OFFSET + 0x20c)
+#define TSI108_PCI_PFAB_IO_UPPER (TSI108_PCI_OFFSET + 0x210)
+#define TSI108_PCI_PFAB_MEM32 (TSI108_PCI_OFFSET + 0x214)
+#define TSI108_PCI_PFAB_PFM3 (TSI108_PCI_OFFSET + 0x220)
+#define TSI108_PCI_PFAB_PFM4 (TSI108_PCI_OFFSET + 0x230)
+
+extern int tsi108_setup_pci(struct device_node *dev);
+extern void tsi108_pci_int_init(struct device_node *node);
+extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
+extern void tsi108_clear_pci_cfg_error(void);
+
+#endif /* _ASM_PPC_TSI108_PCI_H */
next prev parent reply other threads:[~2007-05-07 21:31 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-07 21:22 [PATCH v4 0/7] Add support for 750CL Holly board Josh Boyer
2007-05-07 21:25 ` Josh Boyer [this message]
2007-05-08 1:15 ` [PATCH v4 1/7] Add tsi108_pci.h for common PCI functions Olof Johansson
2007-05-07 21:26 ` [PATCH v4 2/7] Generalize tsi108 PHY types Josh Boyer
2007-05-08 1:15 ` Olof Johansson
2007-05-07 21:27 ` [PATCH v4 3/7] Generalize tsi108 PCI setup Josh Boyer
2007-05-08 1:16 ` Olof Johansson
2007-05-07 21:28 ` [PATCH v4 4/7] Add support for 750CL Holly board Josh Boyer
2007-05-08 1:21 ` Olof Johansson
2007-05-08 16:45 ` Nathan Lynch
2007-05-08 17:01 ` Josh Boyer
2007-05-08 23:47 ` Benjamin Herrenschmidt
2007-05-07 21:29 ` [PATCH v4 5/7] Holly defconfig Josh Boyer
2007-05-07 21:31 ` [PATCH v4 6/7] Holly DTS Josh Boyer
2007-05-07 21:32 ` [PATCH v4 7/7] Holly bootwrapper Josh Boyer
2007-05-08 0:16 ` David Gibson
2007-05-08 1:07 ` Josh Boyer
2007-05-08 1:07 ` David Gibson
2007-05-08 3:45 ` [PATCH v4 0/7] Add support for 750CL Holly board Zang Roy-r61911
2007-05-08 10:46 ` Josh Boyer
2007-05-08 13:49 ` Zang Roy-r61911
2007-05-09 2:19 ` Zang Roy-r61911
2007-05-09 2:34 ` Josh Boyer
2007-05-09 2:52 ` Zang Roy-r61911
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1178573122.2990.199.camel@zod.rchland.ibm.com \
--to=jwboyer@linux.vnet.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).