From: Becky Bruce <becky.bruce@freescale.com>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH] Change include protections to ASM_POWERPC
Date: Thu, 10 May 2007 10:13:04 -0500 [thread overview]
Message-ID: <11788099841311-git-send-email-becky.bruce@freescale.com> (raw)
Change several headers in include/asm-powerpc that currently use some variation
of ASM_PPC to use ASM_POWERPC instead.
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
---
include/asm-powerpc/mpc8260.h | 6 +++---
include/asm-powerpc/pmac_feature.h | 6 +++---
include/asm-powerpc/tsi108_irq.h | 6 +++---
include/asm-powerpc/tsi108_pci.h | 6 +++---
include/asm-powerpc/unistd.h | 6 +++---
5 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/include/asm-powerpc/mpc8260.h b/include/asm-powerpc/mpc8260.h
index f1b83b0..e0d4807 100644
--- a/include/asm-powerpc/mpc8260.h
+++ b/include/asm-powerpc/mpc8260.h
@@ -5,8 +5,8 @@
* this one and the configuration switching is done here.
*/
#ifdef __KERNEL__
-#ifndef __ASM_PPC_MPC8260_H__
-#define __ASM_PPC_MPC8260_H__
+#ifndef __ASM_POWERPC_MPC8260_H__
+#define __ASM_POWERPC_MPC8260_H__
#ifdef CONFIG_8260
@@ -20,5 +20,5 @@
#endif
#endif /* CONFIG_8260 */
-#endif /* !__ASM_PPC_MPC8260_H__ */
+#endif /* !__ASM_POWERPC_MPC8260_H__ */
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h
index d43d91b..26bcb0a 100644
--- a/include/asm-powerpc/pmac_feature.h
+++ b/include/asm-powerpc/pmac_feature.h
@@ -28,8 +28,8 @@
*/
#ifdef __KERNEL__
-#ifndef __PPC_ASM_PMAC_FEATURE_H
-#define __PPC_ASM_PMAC_FEATURE_H
+#ifndef __ASM_POWERPC_PMAC_FEATURE_H
+#define __ASM_POWERPC_PMAC_FEATURE_H
#include <asm/macio.h>
#include <asm/machdep.h>
@@ -393,5 +393,5 @@ extern u32 __iomem *uninorth_base;
#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v)))
-#endif /* __PPC_ASM_PMAC_FEATURE_H */
+#endif /* __ASM_POWERPC_PMAC_FEATURE_H */
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h
index 3e4d04e..6ed9397 100644
--- a/include/asm-powerpc/tsi108_irq.h
+++ b/include/asm-powerpc/tsi108_irq.h
@@ -26,8 +26,8 @@
* demultiplexing on TSI108EMU/SVB boards.
*/
-#ifndef _ASM_PPC_TSI108_IRQ_H
-#define _ASM_PPC_TSI108_IRQ_H
+#ifndef _ASM_POWERPC_TSI108_IRQ_H
+#define _ASM_POWERPC_TSI108_IRQ_H
/*
* Tsi108 interrupts
@@ -121,4 +121,4 @@ typedef enum {
TSI108_IRQ_DIRECTED,
TSI108_IRQ_DISTRIBUTED,
} TSI108_IRQ_MODE;
-#endif /* _ASM_PPC_TSI108_IRQ_H */
+#endif /* _ASM_POWERPC_TSI108_IRQ_H */
diff --git a/include/asm-powerpc/tsi108_pci.h b/include/asm-powerpc/tsi108_pci.h
index a9f92f7..5653d7c 100644
--- a/include/asm-powerpc/tsi108_pci.h
+++ b/include/asm-powerpc/tsi108_pci.h
@@ -18,8 +18,8 @@
* MA 02111-1307 USA
*/
-#ifndef _ASM_PPC_TSI108_PCI_H
-#define _ASM_PPC_TSI108_PCI_H
+#ifndef _ASM_POWERPC_TSI108_PCI_H
+#define _ASM_POWERPC_TSI108_PCI_H
#include <asm/tsi108.h>
@@ -42,4 +42,4 @@ extern void tsi108_pci_int_init(struct device_node *node);
extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
extern void tsi108_clear_pci_cfg_error(void);
-#endif /* _ASM_PPC_TSI108_PCI_H */
+#endif /* _ASM_POWERPC_TSI108_PCI_H */
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index 2baedbe..ffbc369 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_PPC_UNISTD_H_
-#define _ASM_PPC_UNISTD_H_
+#ifndef _ASM_POWERPC_UNISTD_H_
+#define _ASM_POWERPC_UNISTD_H_
/*
* This file contains the system call numbers.
@@ -380,4 +380,4 @@
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
-#endif /* _ASM_PPC_UNISTD_H_ */
+#endif /* _ASM_POWERPC_UNISTD_H_ */
--
1.5.0.3
next reply other threads:[~2007-05-10 15:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-10 15:13 Becky Bruce [this message]
2007-05-10 16:17 ` [PATCH] Change include protections to ASM_POWERPC Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11788099841311-git-send-email-becky.bruce@freescale.com \
--to=becky.bruce@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).