[PATCH 2/5] Add legacy devices to mpc8641_hpcn.dts

[Wade Farnsworth <wfarnsworth@mvista.com>]

This adds device nodes for the ISA devices on the MPC8641 HPCN to the
dts.  Additionally, it moves the node for the i8259 to the isa bus,
since the i8259 is actually on that bus.


Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>

---

 arch/powerpc/boot/dts/mpc8641_hpcn.dts |   48 ++++++++++++++++++-----
 1 file changed, 38 insertions(+), 10 deletions(-)

Index: linux-2.6-8641/arch/powerpc/boot/dts/mpc8641_hpcn.dts
===================================================================
--- linux-2.6-8641.orig/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ linux-2.6-8641/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -285,17 +285,45 @@
 				f800 0 0 3 &i8259 0 0
 				f800 0 0 4 &i8259 0 0
 				>;
-			i8259: i8259@4d0 {
-				clock-frequency = <0>;
-				interrupt-controller;
-				device_type = "interrupt-controller";
-				#address-cells = <0>;
+
+			isa@f0 {
+				device_type = "isa";
 				#interrupt-cells = <2>;
-				built-in;
-				compatible = "chrp,iic";
-                	        big-endian;
-				interrupts = <49 2>;
-				interrupt-parent = <&mpic>;
+				#size-cells = <1>;
+				#address-cells = <2>;
+				reg = <f000 0 0 0 0>;
+				ranges = <1 0 01000000 0 0 00001000>;
+				interrupt-parent = <4d0>;
+
+				8042@60 {
+					device_type = "8042";
+					reg = <1 60 1 1 64 1>;
+					interrupts = <1 3 c 3>;
+					interrupt-parent = <4d0>;
+				};
+
+				rtc@70 {
+					device_type = "rtc";
+					reg = <1 70 2>;
+				};
+
+				gpio@400 {
+					device_type = "gpio";
+					reg = <1 400 80>;
+				};
+
+				i8259: i8259@4d0 {
+					clock-frequency = <0>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					built-in;
+					compatible = "chrp,iic";
+                	        	big-endian;
+					interrupts = <49 2>;
+					interrupt-parent = <&mpic>;
+				};
 			};
 
 		};