linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Wade Farnsworth <wfarnsworth@mvista.com>
To: linuxppc-dev <linuxppc-dev@ozlabs.org>
Subject: [PATCH 4/5] Add RTC CMOS support for the MPC8641 HPCN
Date: Tue, 15 May 2007 09:36:03 -0700	[thread overview]
Message-ID: <1179246963.8132.121.camel@rhino> (raw)
In-Reply-To: <1179245829.8132.100.camel@rhino>

This enables the new RTC CMOS driver to be used on the MPC8641 HPCN.

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>

---

 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c |   27 +++++++++++++++++++
 1 file changed, 27 insertions(+)


Index: powerpc-8641/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
===================================================================
--- powerpc-8641.orig/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ powerpc-8641/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -18,6 +18,7 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
+#include <linux/mc146818rtc.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -368,6 +369,32 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_A
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
+
+#ifdef CONFIG_RTC_DRV_CMOS
+struct resource rtc_platform_resource = {
+	.flags		= IORESOURCE_IO,
+	.start		= RTC_PORT(0),
+	.end		= RTC_PORT(1),
+};
+
+static int  __init mpc8641_hpcn_add_rtc(void)
+{
+	struct platform_device *pd;
+
+	pd = platform_device_register_simple("rtc_cmos", -1,
+					     &rtc_platform_resource, 1);
+	if (IS_ERR(pd))
+		return PTR_ERR(pd);
+
+	/* rtc-cmos only supports 24-hr mode */
+	CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_24H, RTC_CONTROL);
+
+	return 0;
+}
+arch_initcall(mpc8641_hpcn_add_rtc);
+
+#endif /* CONFIG_RTC_DRV_CMOS */
+
 #endif /* CONFIG_PCI */
 
 

  parent reply	other threads:[~2007-05-15 16:36 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-15 16:17 [PATCH 0/5] MPC8641 HPCN fixes Wade Farnsworth
2007-05-15 16:23 ` [PATCH 1/5] Add MTD support to mpc8641_hpcn.dts Wade Farnsworth
2007-05-15 16:27 ` [PATCH 2/5] Add legacy devices " Wade Farnsworth
2007-05-16 16:37   ` Jon Loeliger
2007-05-16 17:59     ` Wade Farnsworth
2007-05-16 19:59       ` Segher Boessenkool
2007-05-16 19:55     ` Segher Boessenkool
2007-05-16 20:03       ` Sergei Shtylyov
2007-05-16 20:17       ` Wade Farnsworth
2007-05-16 23:40         ` Segher Boessenkool
2007-05-16 23:47           ` Segher Boessenkool
2007-05-17  0:11             ` Wade Farnsworth
2007-05-17  0:09           ` Wade Farnsworth
2007-05-18 16:44           ` Jon Loeliger
2007-05-21 16:04             ` Wade Farnsworth
2007-05-21 16:10               ` Jon Loeliger
2007-05-21 16:51                 ` Wade Farnsworth
2007-05-16 20:29       ` Wade Farnsworth
2007-07-07 18:29       ` Sergei Shtylyov
2007-07-07 18:39         ` Arnd Bergmann
2007-07-08 13:13         ` Segher Boessenkool
2007-07-08 20:36           ` Arnd Bergmann
2007-07-08 23:42             ` Segher Boessenkool
2007-07-09 12:43           ` Sergei Shtylyov
2007-07-09 14:43             ` Segher Boessenkool
2007-07-07 18:59   ` Sergei Shtylyov
2007-07-07 19:23     ` Arnd Bergmann
2007-05-15 16:32 ` [PATCH 3/5] Support for the LPC47M192 SuperIO on the MPC8641 HPCN Wade Farnsworth
2007-05-15 16:36 ` Wade Farnsworth [this message]
2007-05-15 16:50 ` [PATCH 5/5] PCI fixes for the MPC8641 Rev 2.0 silicon and Rev 1.02 hardware Wade Farnsworth
2007-05-16 16:44   ` Jon Loeliger
2007-05-16 18:06     ` Wade Farnsworth
2007-05-18  6:52       ` [PATCH 5/5] PCI fixes for the MPC8641 Rev 2.0 silicon and Rev1.02 hardware Jin Zhengxiong-R64188
2007-05-21 15:59         ` Wade Farnsworth
2007-05-17  2:50   ` [PATCH 5/5] PCI fixes for the MPC8641 Rev 2.0 silicon and Rev 1.02hardware Zhang Wei-r63237
2007-05-17 16:03     ` Wade Farnsworth
2007-05-17 16:14       ` Kumar Gala
2007-05-17 16:58         ` Wade Farnsworth
2007-05-17 18:46           ` Timur Tabi
2007-05-17 18:48             ` Timur Tabi
2007-05-17 18:53               ` Scott Wood
2007-05-17 18:59                 ` Timur Tabi
2007-05-17 19:16                   ` Jerry Van Baren
2007-05-18 13:48                   ` Matt Sealey
2007-05-17 22:34             ` Wade Farnsworth
2007-05-18  0:56             ` David Gibson
2007-05-18  3:49               ` Jerry Van Baren
2007-05-18 14:34               ` Timur Tabi
2007-05-18 15:22                 ` Jerry Van Baren
2007-05-18 16:46                 ` Scott Wood
2007-05-18 17:30                   ` Jerry Van Baren
2007-05-18 17:39                     ` Timur Tabi
2007-05-18 17:43                       ` Scott Wood
2007-05-18 17:47                         ` Timur Tabi
2007-05-18 17:52                           ` Scott Wood
2007-05-18 17:56                             ` Timur Tabi
2007-05-18 18:02                               ` Scott Wood
2007-05-18 18:03                               ` Jerry Van Baren
2007-05-18 18:19                               ` Jon Loeliger
2007-05-18 18:23                                 ` Scott Wood
2007-05-18 19:05                                   ` Jon Loeliger
2007-05-18 19:09                                     ` Scott Wood
2007-05-18 18:30                                 ` Timur Tabi
2007-05-18 17:59                       ` Jerry Van Baren
2007-05-18 10:20           ` [PATCH 5/5] PCI fixes for the MPC8641 Rev 2.0 silicon and Rev1.02hardware Zhang Wei-r63237
2007-05-21 16:01             ` Wade Farnsworth
2007-05-22  2:53               ` [PATCH 5/5] PCI fixes for the MPC8641 Rev 2.0 silicon andRev1.02hardware Zhang Wei-r63237

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1179246963.8132.121.camel@rhino \
    --to=wfarnsworth@mvista.com \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).