From: Jon Loeliger <jdl@freescale.com>
To: Wade Farnsworth <wfarnsworth@mvista.com>
Cc: linuxppc-dev <linuxppc-dev@ozlabs.org>
Subject: Re: [PATCH 2/5] Add legacy devices to mpc8641_hpcn.dts
Date: Mon, 21 May 2007 11:10:54 -0500 [thread overview]
Message-ID: <1179763854.13019.8.camel@ld0161-tx32> (raw)
In-Reply-To: <1179763484.8132.293.camel@rhino>
On Mon, 2007-05-21 at 11:04, Wade Farnsworth wrote:
> I wonder if you're running into the locked RTC problem on the m1575.
> The version of u-boot that I'm using (recent pull from
> opensource.freescale.com)
Which repository? I ask because it is highly likely that
I placed it there...
> has a workaround for that. Can you verify if
> this is the problem?
Can you point to "the workaround" to which you refer?
> For the benefit of those who aren't aware of the problem, the RTC on the
> m1575 is locked on boot until PCI memory space is read.
Hmmm. I'm pretty sure this is being done already.
> Maybe we should put the workaround in the kernel instead. Any opinions?
How are you getting it to work now as it is, then?
jdl
next prev parent reply other threads:[~2007-05-21 16:11 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-15 16:17 [PATCH 0/5] MPC8641 HPCN fixes Wade Farnsworth
2007-05-15 16:23 ` [PATCH 1/5] Add MTD support to mpc8641_hpcn.dts Wade Farnsworth
2007-05-15 16:27 ` [PATCH 2/5] Add legacy devices " Wade Farnsworth
2007-05-16 16:37 ` Jon Loeliger
2007-05-16 17:59 ` Wade Farnsworth
2007-05-16 19:59 ` Segher Boessenkool
2007-05-16 19:55 ` Segher Boessenkool
2007-05-16 20:03 ` Sergei Shtylyov
2007-05-16 20:17 ` Wade Farnsworth
2007-05-16 23:40 ` Segher Boessenkool
2007-05-16 23:47 ` Segher Boessenkool
2007-05-17 0:11 ` Wade Farnsworth
2007-05-17 0:09 ` Wade Farnsworth
2007-05-18 16:44 ` Jon Loeliger
2007-05-21 16:04 ` Wade Farnsworth
2007-05-21 16:10 ` Jon Loeliger [this message]
2007-05-21 16:51 ` Wade Farnsworth
2007-05-16 20:29 ` Wade Farnsworth
2007-07-07 18:29 ` Sergei Shtylyov
2007-07-07 18:39 ` Arnd Bergmann
2007-07-08 13:13 ` Segher Boessenkool
2007-07-08 20:36 ` Arnd Bergmann
2007-07-08 23:42 ` Segher Boessenkool
2007-07-09 12:43 ` Sergei Shtylyov
2007-07-09 14:43 ` Segher Boessenkool
2007-07-07 18:59 ` Sergei Shtylyov
2007-07-07 19:23 ` Arnd Bergmann
2007-05-15 16:32 ` [PATCH 3/5] Support for the LPC47M192 SuperIO on the MPC8641 HPCN Wade Farnsworth
2007-05-15 16:36 ` [PATCH 4/5] Add RTC CMOS support for " Wade Farnsworth
2007-05-15 16:50 ` [PATCH 5/5] PCI fixes for the MPC8641 Rev 2.0 silicon and Rev 1.02 hardware Wade Farnsworth
2007-05-16 16:44 ` Jon Loeliger
2007-05-16 18:06 ` Wade Farnsworth
2007-05-18 6:52 ` [PATCH 5/5] PCI fixes for the MPC8641 Rev 2.0 silicon and Rev1.02 hardware Jin Zhengxiong-R64188
2007-05-21 15:59 ` Wade Farnsworth
2007-05-17 2:50 ` [PATCH 5/5] PCI fixes for the MPC8641 Rev 2.0 silicon and Rev 1.02hardware Zhang Wei-r63237
2007-05-17 16:03 ` Wade Farnsworth
2007-05-17 16:14 ` Kumar Gala
2007-05-17 16:58 ` Wade Farnsworth
2007-05-17 18:46 ` Timur Tabi
2007-05-17 18:48 ` Timur Tabi
2007-05-17 18:53 ` Scott Wood
2007-05-17 18:59 ` Timur Tabi
2007-05-17 19:16 ` Jerry Van Baren
2007-05-18 13:48 ` Matt Sealey
2007-05-17 22:34 ` Wade Farnsworth
2007-05-18 0:56 ` David Gibson
2007-05-18 3:49 ` Jerry Van Baren
2007-05-18 14:34 ` Timur Tabi
2007-05-18 15:22 ` Jerry Van Baren
2007-05-18 16:46 ` Scott Wood
2007-05-18 17:30 ` Jerry Van Baren
2007-05-18 17:39 ` Timur Tabi
2007-05-18 17:43 ` Scott Wood
2007-05-18 17:47 ` Timur Tabi
2007-05-18 17:52 ` Scott Wood
2007-05-18 17:56 ` Timur Tabi
2007-05-18 18:02 ` Scott Wood
2007-05-18 18:03 ` Jerry Van Baren
2007-05-18 18:19 ` Jon Loeliger
2007-05-18 18:23 ` Scott Wood
2007-05-18 19:05 ` Jon Loeliger
2007-05-18 19:09 ` Scott Wood
2007-05-18 18:30 ` Timur Tabi
2007-05-18 17:59 ` Jerry Van Baren
2007-05-18 10:20 ` [PATCH 5/5] PCI fixes for the MPC8641 Rev 2.0 silicon and Rev1.02hardware Zhang Wei-r63237
2007-05-21 16:01 ` Wade Farnsworth
2007-05-22 2:53 ` [PATCH 5/5] PCI fixes for the MPC8641 Rev 2.0 silicon andRev1.02hardware Zhang Wei-r63237
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1179763854.13019.8.camel@ld0161-tx32 \
--to=jdl@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=wfarnsworth@mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).