From: Zhang Wei <wei.zhang@freescale.com>
To: paulus@samba.org
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 and MPC8641HPCN board 2.0
Date: Tue, 22 May 2007 11:38:25 +0800 [thread overview]
Message-ID: <11798051102658-git-send-email-wei.zhang@freescale.com> (raw)
Hi, Paul,
The below 5 patches add the support for MPC8641 rev 2.0 silicon and MPC8641HPCN board 2.0.
[PATCH 1/5] Remove the errata fix codes for MPC8641 silicon ver 1.0 which is end of life.
[PATCH 2/5] Add uli1575 pci-bridge sector to MPC8641HPCN dts file.
[PATCH 3/5] Float the pci bus number on MPC8641HPCN board.
[PATCH 4/5] Set RC of mpc8641 to transparent bridge for transfer legacy I/O access.
[PATCH 5/5] Set IDE in ULI1575 to not native mode.
The MPC8641 rev 2.0 silicon fix the PCI/PCI-Express errata in rev 1.0. And the rev 1.0 silicon is end of life. So the dts tree and codes should be changes. Codes which are not compatible with PCI/PCI-Express specifications are removed. Some minor issues are fixed.
Thanks!
Best Regards,
Zhang Wei
next reply other threads:[~2007-05-22 3:31 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-22 3:38 Zhang Wei [this message]
2007-05-22 3:38 ` [PATCH 1/5] Remove the errata fix codes for MPC8641 silicon ver 1.0 which is end of life Zhang Wei
2007-05-22 3:38 ` [PATCH 2/5] Add uli1575 pci-bridge sector to MPC8641HPCN dts file Zhang Wei
2007-05-22 3:38 ` [PATCH 3/5] Float the pci bus number on MPC8641HPCN board Zhang Wei
2007-05-22 3:38 ` [PATCH 4/5] Set RC of mpc8641 to transparent bridge for transfer legacy I/O access Zhang Wei
2007-05-22 3:38 ` [PATCH 5/5] Set IDE in ULI1575 to not native mode Zhang Wei
2007-05-29 18:15 ` Jon Loeliger
2007-05-29 20:50 ` Kumar Gala
2007-05-30 2:25 ` Zhang Wei-r63237
2007-05-30 11:40 ` Benjamin Herrenschmidt
2007-05-31 2:00 ` Zhang Wei-r63237
2007-05-30 11:18 ` Benjamin Herrenschmidt
2007-05-29 18:15 ` [PATCH 4/5] Set RC of mpc8641 to transparent bridge for transfer legacy I/O access Jon Loeliger
2007-05-22 17:59 ` [PATCH 3/5] Float the pci bus number on MPC8641HPCN board Wade Farnsworth
2007-05-23 3:35 ` Zhang Wei-r63237
2007-05-31 13:43 ` Kumar Gala
2007-06-01 2:01 ` Zhang Wei-r63237
2007-06-01 5:08 ` Kumar Gala
2007-06-01 6:28 ` Paul Mackerras
2007-06-01 6:45 ` Zhang Wei-r63237
2007-06-01 7:44 ` Benjamin Herrenschmidt
2007-06-01 7:53 ` Zhang Wei-r63237
2007-06-01 8:00 ` Benjamin Herrenschmidt
2007-06-01 16:35 ` Matt Sealey
2007-06-01 16:47 ` Jon Loeliger
2007-06-01 22:41 ` Benjamin Herrenschmidt
2007-06-01 22:41 ` Benjamin Herrenschmidt
2007-06-02 8:36 ` Segher Boessenkool
2007-06-02 8:55 ` Benjamin Herrenschmidt
2007-06-01 19:58 ` Kumar Gala
2007-06-01 23:28 ` Benjamin Herrenschmidt
2007-06-04 19:00 ` Jon Loeliger
2007-06-04 22:24 ` Benjamin Herrenschmidt
2007-06-01 6:29 ` Zhang Wei-r63237
2007-05-29 18:14 ` Jon Loeliger
2007-05-22 20:37 ` [PATCH 2/5] Add uli1575 pci-bridge sector to MPC8641HPCN dts file xianghua xiao
2007-05-23 3:38 ` Zhang Wei-r63237
2007-05-29 18:14 ` Jon Loeliger
2007-05-29 20:39 ` Kumar Gala
2007-05-30 10:02 ` Zhang Wei-r63237
2007-05-30 10:18 ` Segher Boessenkool
2007-05-30 11:07 ` Benjamin Herrenschmidt
2007-05-30 22:26 ` Wade Farnsworth
2007-05-29 18:13 ` [PATCH 1/5] Remove the errata fix codes for MPC8641 silicon ver 1.0 which is end of life Jon Loeliger
2007-05-22 3:53 ` [PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 and MPC8641HPCN board 2.0 Kumar Gala
2007-05-22 4:46 ` Zhang Wei-r63237
2007-05-22 12:54 ` Kumar Gala
2007-05-22 16:28 ` Jon Loeliger
2007-05-22 17:47 ` Wade Farnsworth
2007-05-23 2:48 ` [PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 andMPC8641HPCN " Zhang Wei-r63237
2007-05-23 22:37 ` Wade Farnsworth
2007-05-29 18:12 ` [PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 and MPC8641HPCN " Jon Loeliger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11798051102658-git-send-email-wei.zhang@freescale.com \
--to=wei.zhang@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).