From: Jon Loeliger <jdl@freescale.com>
To: "linuxppc-dev@ozlabs.org" <linuxppc-dev@ozlabs.org>
Subject: [PATCH v2 4/9] Float the PCi bus number assignments on MPC8641HPCN board.
Date: Mon, 04 Jun 2007 17:30:06 -0500 [thread overview]
Message-ID: <1180996206.9632.72.camel@ld0161-tx32> (raw)
From: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Acked-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 1 +
arch/powerpc/platforms/86xx/pci.c | 12 ++++++++++++
2 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 1051702..9259788 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -363,6 +363,7 @@ mpc86xx_hpcn_setup_arch(void)
}
#ifdef CONFIG_PCI
+ pci_assign_all_buses = 1;
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
index 07ff52c..c80d8f1 100644
--- a/arch/powerpc/platforms/86xx/pci.c
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -136,6 +136,18 @@ mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
int mpc86xx_exclude_device(u_char bus, u_char devfn)
{
+ struct pci_controller *hose;
+
+ hose = pci_bus_to_hose(bus);
+ if (unlikely(!hose))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Correcting the hose->bus_offset value. */
+ out_be32(hose->cfg_addr, 0x80000000 | ((hose->first_busno
+ - hose->bus_offset) << 16));
+ if (unlikely(in_le32(hose->cfg_data) == 0xffffffff))
+ hose->bus_offset = hose->bus_offset ? 0 : hose->first_busno;
+
return PCIBIOS_SUCCESSFUL;
}
--
1.5.0.3
reply other threads:[~2007-06-04 22:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1180996206.9632.72.camel@ld0161-tx32 \
--to=jdl@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).