[PATCH 2/2]: Fix the node index confusion for SOC

[Zang Roy-r61911 <tie-fei.zang@freescale.com>]

From: Roy Zang <tie-fei.zang@freescale.com>

Fix the node index confusion for SOC.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
---
 Documentation/powerpc/booting-without-of.txt |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index bdae4fc..419aa57 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -42,15 +42,15 @@ Table of Contents
     1) Defining child nodes of an SOC
     2) Representing devices without a current OF specification
       a) MDIO IO device
-      c) PHY nodes
       b) Gianfar-compatible ethernet nodes
+      c) PHY nodes
       d) Interrupt controllers
       e) I2C
       f) Freescale SOC USB controllers
       g) Freescale SOC SEC Security Engines
       h) Board Control and Status (BCSR)
       i) Freescale QUICC Engine module (QE)
-      g) Flash chip nodes
+      j) Flash chip nodes
       k) Global Utilities Block
 
   VII - Specifying interrupt information for devices
-- 
1.5.1