From: Nethra <nethra_gmit@yahoo.co.in>
To: linuxppc-embedded@ozlabs.org
Subject: Re: ping command
Date: Thu, 26 Jul 2007 23:46:52 -0700 (PDT) [thread overview]
Message-ID: <11823845.post@talk.nabble.com> (raw)
In-Reply-To: <1185458965.6839.8.camel@saruman.qstreams.net>
root@cashel:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.178.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.32.0 0.0.0.0 255.255.248.0 U 0 0 0 eth1
0.0.0.0 192.168.32.47 0.0.0.0 UG 0 0 0 eth1
0.0.0.0 192.168.178.47 0.0.0.0 UG 0 0 0 eth0
root@cashel:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:13:72:FE:A9:02
inet addr:192.168.178.89 Bcast:192.168.178.255
Mask:255.255.255.0
inet6 addr: fe80::213:72ff:fefe:a902/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:15665 errors:0 dropped:0 overruns:0 frame:0
TX packets:9285 errors:0 dropped:0 overruns:0 carrier:9019
collisions:0 txqueuelen:1000
RX bytes:12957285 (12.3 MiB) TX bytes:2720267 (2.5 MiB)
Base address:0x8400
eth1 Link encap:Ethernet HWaddr 00:13:72:7E:A9:02
inet addr:192.168.33.135 Bcast:192.168.33.255 Mask:255.255.248.0
inet6 addr: fe80::213:72ff:fe7e:a902/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:634 errors:0 dropped:0 overruns:0 frame:0
TX packets:84 errors:0 dropped:0 overruns:0 carrier:82
collisions:0 txqueuelen:1000
RX bytes:103558 (101.1 KiB) TX bytes:12832 (12.5 KiB)
Base address:0x8500
lo Link encap:Local Loopback
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
root@cashel:~#
On Wed, 2007-07-25 at 02:29 -0700, Nethra wrote:
> hi,
>
> I m using custom board same as eval board MPC8272ADS board.
>
> IP assigned for both ethernets are...
>
> ifconfig eth1 192.168.33.135 up
> ifconfig eth1 netmask 255.255.248.0
> route add default gw 192.168.32.47 eth1
>
>
> ifconfig eth0 192.168.178.89 up
> ifconfig eth0netmask 255.255.255.0
> route add default gw 192.168.178.47 eth0
>
> but if i try for ping 192.168.33.135 command pails by the server of 178
> series
> similarly ping 192.168.178.89 command pails by the server of 33 series..
>
> what is the problem..and whre i m going wrong..?
What does your routing table show? (route -n). It wouldn't hurt to
also post the output of ifconfig for both interfaces.
regards,
Ben
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
--
View this message in context: http://www.nabble.com/ping-command-tf4141032.html#a11823845
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
prev parent reply other threads:[~2007-07-27 6:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-25 9:29 ping command Nethra
2007-07-26 14:09 ` Ben Warren
2007-07-27 6:46 ` Nethra [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11823845.post@talk.nabble.com \
--to=nethra_gmit@yahoo.co.in \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).