[PATCH 00/15] [POWERPC] PCI/PCIe cleanups and fixups for 8641

[PATCH 00/15] [POWERPC] PCI/PCIe cleanups and fixups for 8641

[Kumar Gala]

This is a set of patches queued for 2.6.23 that cleanup some of the PCI
code for ppc32 and get PCIe working on 8641.  Most of these patches have
been seen in one form or another before on the list.

Also available at:

master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc.git for_paulus

- k

[PATCH 01/15] [POWERPC] Remove set_cfg_type for PCI indirect users that don't need it

[Kumar Gala]

The Freescale and Marvell PCI controllers dont require explicit setting for
type 1 config cycles.  They handle producing them by implicitly looking at the
bus, devfn.

The TSI108 and 52xx don't use the generic PCI indirect code and thus don't
bother with set_cfg_type.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/52xx/mpc52xx_pci.c |    1 -
 arch/powerpc/platforms/82xx/mpc82xx_ads.c |    3 ---
 arch/powerpc/platforms/83xx/pci.c         |    1 -
 arch/powerpc/platforms/85xx/pci.c         |    1 -
 arch/powerpc/platforms/86xx/pci.c         |    1 -
 arch/powerpc/sysdev/mv64x60_pci.c         |    1 -
 arch/powerpc/sysdev/tsi108_pci.c          |    1 -
 7 files changed, 0 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index 34d34a2..51164c8 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -390,7 +390,6 @@ mpc52xx_add_bridge(struct device_node *node)
 		return -ENOMEM;
 
 	hose->arch_data = node;
-	hose->set_cfg_type = 1;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
index 081c0ab..04bf570 100644
--- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
@@ -548,14 +548,11 @@ static void __init mpc82xx_add_bridge(struct device_node *np)
 		return;
 
 	hose->arch_data = np;
-	hose->set_cfg_type = 1;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 	hose->bus_offset = 0;
 
-	hose->set_cfg_type = 1;
-
 	setup_indirect_pci(hose,
 			   r.start + offsetof(pci_cpm2_t, pci_cfg_addr),
 			   r.start + offsetof(pci_cpm2_t, pci_cfg_data));
diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c
index 1752d45..3471602 100644
--- a/arch/powerpc/platforms/83xx/pci.c
+++ b/arch/powerpc/platforms/83xx/pci.c
@@ -70,7 +70,6 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
 	if (!hose)
 		return -ENOMEM;
 	hose->arch_data = dev;
-	hose->set_cfg_type = 1;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
diff --git a/arch/powerpc/platforms/85xx/pci.c b/arch/powerpc/platforms/85xx/pci.c
index 3c38ae4..72a1bc5 100644
--- a/arch/powerpc/platforms/85xx/pci.c
+++ b/arch/powerpc/platforms/85xx/pci.c
@@ -61,7 +61,6 @@ int __init mpc85xx_add_bridge(struct device_node *dev)
 	if (!hose)
 		return -ENOMEM;
 	hose->arch_data = dev;
-	hose->set_cfg_type = 1;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
index c1d65fa..1e47c14 100644
--- a/arch/powerpc/platforms/86xx/pci.c
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -172,7 +172,6 @@ int __init mpc86xx_add_bridge(struct device_node *dev)
 	if (!hose)
 		return -ENOMEM;
 	hose->arch_data = dev;
-	hose->set_cfg_type = 1;
 
 	/* last_busno = 0xfe cause by MPC8641 PCIE bug */
 	hose->first_busno = bus_range ? bus_range[0] : 0x0;
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
index b5aef4c..6b08e76 100644
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -142,7 +142,6 @@ static int __init mv64x60_add_bridge(struct device_node *dev)
 		return -ENOMEM;
 
 	hose->arch_data = dev;
-	hose->set_cfg_type = 1;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 2153163..33177b6 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -226,7 +226,6 @@ int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
 		return -ENOMEM;
 	}
 	hose->arch_data = dev;
-	hose->set_cfg_type = 1;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
-- 
1.5.2.1

[PATCH 02/15] [POWERPC] 52xx: Remove support for PCI bus_offset

[Kumar Gala]

The hose->bus_offset is only used for PCI config cycles and the 52xx PCI
config code doesn't actually ever set bus_offset to a non-zero value.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/52xx/mpc52xx_pci.c |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index 51164c8..57ca2fe 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -117,13 +117,13 @@ mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 
 	out_be32(hose->cfg_addr,
 		(1 << 31) |
-		((bus->number - hose->bus_offset) << 16) |
+		(bus->number << 16) |
 		(devfn << 8) |
 		(offset & 0xfc));
 	mb();
 
 #if defined(CONFIG_PPC_MPC5200_BUGFIX)
-	if (bus->number != hose->bus_offset) {
+	if (bus->number) {
 		/* workaround for the bug 435 of the MPC5200 (L25R);
 		 * Don't do 32 bits config access during type-1 cycles */
 		switch (len) {
@@ -174,13 +174,13 @@ mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 
 	out_be32(hose->cfg_addr,
 		(1 << 31) |
-		((bus->number - hose->bus_offset) << 16) |
+		(bus->number << 16) |
 		(devfn << 8) |
 		(offset & 0xfc));
 	mb();
 
 #if defined(CONFIG_PPC_MPC5200_BUGFIX)
-	if (bus->number != hose->bus_offset) {
+	if (bus->number) {
 		/* workaround for the bug 435 of the MPC5200 (L25R);
 		 * Don't do 32 bits config access during type-1 cycles */
 		switch (len) {
@@ -394,7 +394,6 @@ mpc52xx_add_bridge(struct device_node *node)
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
-	hose->bus_offset = 0;
 	hose->ops = &mpc52xx_pci_ops;
 
 	pci_regs = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);
-- 
1.5.2.1

[PATCH 03/15] [POWERPC] Pass the pci_controller into pci_exclude_device

[Kumar Gala]

There are times that we need to know which controller we are on to decide
how to exclude devices properly.  We now pass the pci_controller that we
are going to use down to the pci_exclude_device function. This will
greatly simplify being able to exclude the PHBs in multiple controller
setups.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/82xx/mpc82xx_ads.c         |    3 +-
 arch/powerpc/platforms/83xx/mpc83xx.h             |    4 +-
 arch/powerpc/platforms/83xx/pci.c                 |    2 +-
 arch/powerpc/platforms/85xx/mpc85xx_ads.c         |    3 +-
 arch/powerpc/platforms/85xx/mpc85xx_cds.c         |    3 +-
 arch/powerpc/platforms/86xx/mpc86xx.h             |    3 +-
 arch/powerpc/platforms/86xx/pci.c                 |    2 +-
 arch/powerpc/platforms/embedded6xx/holly.c        |    2 +-
 arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c |    3 +-
 arch/powerpc/sysdev/Makefile                      |    2 +-
 arch/powerpc/sysdev/fsl_pcie.c                    |    4 +-
 arch/powerpc/sysdev/indirect_pci.c                |    8 +-
 arch/powerpc/sysdev/tsi108_pci.c                  |    6 +-
 arch/ppc/syslib/Makefile                          |    1 +
 arch/ppc/syslib/indirect_pci.c                    |  134 +++++++++++++++++++++
 include/asm-powerpc/machdep.h                     |    2 +-
 16 files changed, 163 insertions(+), 19 deletions(-)
 create mode 100644 arch/ppc/syslib/indirect_pci.c

diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
index 04bf570..715107b 100644
--- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
@@ -507,7 +507,8 @@ void m82xx_pci_init_irq(void)
 	return;
 }
 
-static int m82xx_pci_exclude_device(u_char bus, u_char devfn)
+static int m82xx_pci_exclude_device(struct pci_controller *hose,
+				    u_char bus, u_char devfn)
 {
 	if (bus == 0 && PCI_SLOT(devfn) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 9bd85f5..f5c5034 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -3,6 +3,7 @@
 
 #include <linux/init.h>
 #include <linux/device.h>
+#include <asm/pci-bridge.h>
 
 /* System Clock Control Register */
 #define MPC83XX_SCCR_OFFS          0xA08
@@ -28,7 +29,8 @@
  */
 
 extern int mpc83xx_add_bridge(struct device_node *dev);
-extern int mpc83xx_exclude_device(u_char bus, u_char devfn);
+extern int mpc83xx_exclude_device(struct pci_controller *hose,
+				  u_char bus, u_char devfn);
 extern void mpc83xx_restart(char *cmd);
 extern long mpc83xx_time_init(void);
 
diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c
index 3471602..f92e71f 100644
--- a/arch/powerpc/platforms/83xx/pci.c
+++ b/arch/powerpc/platforms/83xx/pci.c
@@ -35,7 +35,7 @@
 
 int mpc83xx_pci2_busno;
 
-int mpc83xx_exclude_device(u_char bus, u_char devfn)
+int mpc83xx_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
 {
 	if (bus == 0 && PCI_SLOT(devfn) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 4100e17..1262d1b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -39,7 +39,8 @@
 #endif
 
 #ifdef CONFIG_PCI
-static int mpc85xx_exclude_device(u_char bus, u_char devfn)
+static int mpc85xx_exclude_device(struct pci_controller *hose,
+				   u_char bus, u_char devfn)
 {
 	if (bus == 0 && PCI_SLOT(devfn) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index fa6b6be..fcea5ab 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -57,7 +57,8 @@ static volatile u8 *cadmus;
 
 extern int mpc85xx_pci2_busno;
 
-static int mpc85xx_exclude_device(u_char bus, u_char devfn)
+static int mpc85xx_exclude_device(struct pci_controller *hose,
+				  u_char bus, u_char devfn)
 {
 	if (bus == 0 && PCI_SLOT(devfn) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h
index dc2f6fd..4c2789d 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx.h
+++ b/arch/powerpc/platforms/86xx/mpc86xx.h
@@ -17,7 +17,8 @@
 
 extern int mpc86xx_add_bridge(struct device_node *dev);
 
-extern int mpc86xx_exclude_device(u_char bus, u_char devfn);
+extern int mpc86xx_exclude_device(struct pci_controller *hose,
+				  u_char bus, u_char devfn);
 
 extern void setup_indirect_pcie(struct pci_controller *hose,
 				       u32 cfg_addr, u32 cfg_data);
diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
index 1e47c14..7659259 100644
--- a/arch/powerpc/platforms/86xx/pci.c
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -140,7 +140,7 @@ mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
 	early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps);
 }
 
-int mpc86xx_exclude_device(u_char bus, u_char devfn)
+int mpc86xx_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
 {
 	if (bus == 0 && PCI_SLOT(devfn) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c
index 3a0b4a0..6292e36 100644
--- a/arch/powerpc/platforms/embedded6xx/holly.c
+++ b/arch/powerpc/platforms/embedded6xx/holly.c
@@ -45,7 +45,7 @@
 
 #define HOLLY_PCI_CFG_PHYS 0x7c000000
 
-int holly_exclude_device(u_char bus, u_char devfn)
+int holly_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
 {
 	if (bus == 0 && PCI_SLOT(devfn) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index 69eab17..1e3cc69 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -56,7 +56,8 @@
 
 extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
 
-int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
+int mpc7448_hpc2_exclude_device(struct pci_controller *hose,
+				u_char bus, u_char devfn)
 {
 	if (bus == 0 && PCI_SLOT(devfn) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index c3ce0bd..43fd7e0 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -5,7 +5,6 @@ endif
 mpic-msi-obj-$(CONFIG_PCI_MSI)	+= mpic_msi.o mpic_u3msi.o
 obj-$(CONFIG_MPIC)		+= mpic.o $(mpic-msi-obj-y)
 
-obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPC_MPC106)	+= grackle.o
 obj-$(CONFIG_PPC_DCR)		+= dcr.o
 obj-$(CONFIG_PPC_DCR_NATIVE)	+= dcr-low.o
@@ -23,6 +22,7 @@ obj-$(CONFIG_MV64X60)		+= $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o
 obj-$(CONFIG_PM)		+= timer.o
 
 ifeq ($(CONFIG_PPC_MERGE),y)
+obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_PPC_83xx)		+= ipic.o
 obj-$(CONFIG_4xx)		+= uic.o
diff --git a/arch/powerpc/sysdev/fsl_pcie.c b/arch/powerpc/sysdev/fsl_pcie.c
index 041c07e..6bbd7f8 100644
--- a/arch/powerpc/sysdev/fsl_pcie.c
+++ b/arch/powerpc/sysdev/fsl_pcie.c
@@ -39,7 +39,7 @@ indirect_read_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset,
 	u32 temp;
 
 	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
+		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
 			return PCIBIOS_DEVICE_NOT_FOUND;
 
 	/* Possible artifact of CDCpp50937 needs further investigation */
@@ -90,7 +90,7 @@ indirect_write_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset,
 	u32 temp;
 
 	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
+		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
 			return PCIBIOS_DEVICE_NOT_FOUND;
 
 	/* Possible artifact of CDCpp50937 needs further investigation */
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index e714884..3dedf8f 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -35,14 +35,14 @@ indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 	u8 cfg_type = 0;
 
 	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
+		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
 			return PCIBIOS_DEVICE_NOT_FOUND;
 	
 	if (hose->set_cfg_type)
 		if (bus->number != hose->first_busno)
 			cfg_type = 1;
 
-	PCI_CFG_OUT(hose->cfg_addr, 					 
+	PCI_CFG_OUT(hose->cfg_addr,
 		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
 		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
 
@@ -74,14 +74,14 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 	u8 cfg_type = 0;
 
 	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
+		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
 			return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (hose->set_cfg_type)
 		if (bus->number != hose->first_busno)
 			cfg_type = 1;
 
-	PCI_CFG_OUT(hose->cfg_addr, 					 
+	PCI_CFG_OUT(hose->cfg_addr,
 		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
 		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
 
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 33177b6..298e2dd 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -64,9 +64,10 @@ tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
 			   int offset, int len, u32 val)
 {
 	volatile unsigned char *cfg_addr;
+	struct pci_controller *hose = bus->sysdata;
 
 	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfunc))
+		if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
 			return PCIBIOS_DEVICE_NOT_FOUND;
 
 	cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
@@ -149,10 +150,11 @@ tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 			  int len, u32 * val)
 {
 	volatile unsigned char *cfg_addr;
+	struct pci_controller *hose = bus->sysdata;
 	u32 temp;
 
 	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
+		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
 			return PCIBIOS_DEVICE_NOT_FOUND;
 
 	cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 9569415..543795b 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -7,6 +7,7 @@ CFLAGS_btext.o          += -fPIC
 
 wdt-mpc8xx-$(CONFIG_8xx_WDT)	+= m8xx_wdt.o
 
+obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPCBUG_NVRAM)	+= prep_nvram.o
 obj-$(CONFIG_PPC_OCP)		+= ocp.o
 obj-$(CONFIG_IBM_OCP)		+= ibm_ocp.o
diff --git a/arch/ppc/syslib/indirect_pci.c b/arch/ppc/syslib/indirect_pci.c
new file mode 100644
index 0000000..e714884
--- /dev/null
+++ b/arch/ppc/syslib/indirect_pci.c
@@ -0,0 +1,134 @@
+/*
+ * Support for indirect PCI bridges.
+ *
+ * Copyright (C) 1998 Gabriel Paubert.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+
+#ifdef CONFIG_PPC_INDIRECT_PCI_BE
+#define PCI_CFG_OUT out_be32
+#else
+#define PCI_CFG_OUT out_le32
+#endif
+
+static int
+indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 *val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	volatile void __iomem *cfg_data;
+	u8 cfg_type = 0;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	
+	if (hose->set_cfg_type)
+		if (bus->number != hose->first_busno)
+			cfg_type = 1;
+
+	PCI_CFG_OUT(hose->cfg_addr, 					 
+		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
+		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + (offset & 3);
+	switch (len) {
+	case 1:
+		*val = in_8(cfg_data);
+		break;
+	case 2:
+		*val = in_le16(cfg_data);
+		break;
+	default:
+		*val = in_le32(cfg_data);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		      int len, u32 val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	volatile void __iomem *cfg_data;
+	u8 cfg_type = 0;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (hose->set_cfg_type)
+		if (bus->number != hose->first_busno)
+			cfg_type = 1;
+
+	PCI_CFG_OUT(hose->cfg_addr, 					 
+		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
+		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + (offset & 3);
+	switch (len) {
+	case 1:
+		out_8(cfg_data, val);
+		break;
+	case 2:
+		out_le16(cfg_data, val);
+		break;
+	default:
+		out_le32(cfg_data, val);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops indirect_pci_ops =
+{
+	indirect_read_config,
+	indirect_write_config
+};
+
+void __init
+setup_indirect_pci_nomap(struct pci_controller* hose, void __iomem * cfg_addr,
+	void __iomem * cfg_data)
+{
+	hose->cfg_addr = cfg_addr;
+	hose->cfg_data = cfg_data;
+	hose->ops = &indirect_pci_ops;
+}
+
+void __init
+setup_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
+{
+	unsigned long base = cfg_addr & PAGE_MASK;
+	void __iomem *mbase, *addr, *data;
+
+	mbase = ioremap(base, PAGE_SIZE);
+	addr = mbase + (cfg_addr & ~PAGE_MASK);
+	if ((cfg_data & PAGE_MASK) != base)
+		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
+	data = mbase + (cfg_data & ~PAGE_MASK);
+	setup_indirect_pci_nomap(hose, addr, data);
+}
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 6cf1a83..71c6e7e 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -218,7 +218,7 @@ struct machdep_calls {
 	int  (*pcibios_enable_device_hook)(struct pci_dev *, int initial);
 
 	/* Called in indirect_* to avoid touching devices */
-	int (*pci_exclude_device)(unsigned char, unsigned char);
+	int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
 
 	/* Called at then very end of pcibios_init() */
 	void (*pcibios_after_init)(void);
-- 
1.5.2.1

[PATCH 04/15] [POWERPC] Remove hack to determine the 2nd PHBs bus number

[Kumar Gala]

Now that we have the pci_controller in the exclude function we can easy
figure out if the bus number is the PHB or not.  The old style of using a
variable setup at init time was actually broken and would only work in
specific cases.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/83xx/pci.c         |    8 +-------
 arch/powerpc/platforms/85xx/mpc85xx_cds.c |    7 +------
 arch/powerpc/platforms/85xx/pci.c         |    3 ---
 3 files changed, 2 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c
index f92e71f..8da935c 100644
--- a/arch/powerpc/platforms/83xx/pci.c
+++ b/arch/powerpc/platforms/83xx/pci.c
@@ -33,15 +33,10 @@
 #define DBG(x...)
 #endif
 
-int mpc83xx_pci2_busno;
-
 int mpc83xx_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
 {
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
+	if ((bus == hose->first_busno) && PCI_SLOT(devfn) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	if (mpc83xx_pci2_busno)
-		if (bus == (mpc83xx_pci2_busno) && PCI_SLOT(devfn) == 0)
-			return PCIBIOS_DEVICE_NOT_FOUND;
 	return PCIBIOS_SUCCESSFUL;
 }
 
@@ -86,7 +81,6 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
 		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384);
 		primary = 0;
 		hose->bus_offset = hose->first_busno;
-		mpc83xx_pci2_busno = hose->first_busno;
 	}
 
 	printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index fcea5ab..04a1eaa 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -55,16 +55,11 @@ static volatile u8 *cadmus;
 #define ARCADIA_HOST_BRIDGE_IDSEL	17
 #define ARCADIA_2ND_BRIDGE_IDSEL	3
 
-extern int mpc85xx_pci2_busno;
-
 static int mpc85xx_exclude_device(struct pci_controller *hose,
 				  u_char bus, u_char devfn)
 {
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
+	if ((bus == hose->first_busno) && PCI_SLOT(devfn) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	if (mpc85xx_pci2_busno)
-		if (bus == (mpc85xx_pci2_busno) && PCI_SLOT(devfn) == 0)
-			return PCIBIOS_DEVICE_NOT_FOUND;
 	/* We explicitly do not go past the Tundra 320 Bridge */
 	if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
 		return PCIBIOS_DEVICE_NOT_FOUND;
diff --git a/arch/powerpc/platforms/85xx/pci.c b/arch/powerpc/platforms/85xx/pci.c
index 72a1bc5..be67f67 100644
--- a/arch/powerpc/platforms/85xx/pci.c
+++ b/arch/powerpc/platforms/85xx/pci.c
@@ -33,8 +33,6 @@
 #define DBG(x...)
 #endif
 
-int mpc85xx_pci2_busno = 0;
-
 #ifdef CONFIG_PCI
 int __init mpc85xx_add_bridge(struct device_node *dev)
 {
@@ -74,7 +72,6 @@ int __init mpc85xx_add_bridge(struct device_node *dev)
 		setup_indirect_pci(hose, immr + 0x9000, immr + 0x9004);
 		primary = 0;
 		hose->bus_offset = hose->first_busno;
-		mpc85xx_pci2_busno = hose->first_busno;
 	}
 
 	printk(KERN_INFO "Found MPC85xx PCI host bridge at 0x%016llx. "
-- 
1.5.2.1

[PATCH 05/15] [POWERPC] Remove bus_offset in places its not really used

[Kumar Gala]

The user of the fsl_pcie code doesn't set bus_offset and 82xx doesn't
require it either.  Remove the places in the code that reference it so
we can remove it all together.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/82xx/mpc82xx_ads.c |    1 -
 arch/powerpc/sysdev/fsl_pcie.c            |    8 ++++----
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
index 715107b..d1e0919 100644
--- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
@@ -552,7 +552,6 @@ static void __init mpc82xx_add_bridge(struct device_node *np)
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
-	hose->bus_offset = 0;
 
 	setup_indirect_pci(hose,
 			   r.start + offsetof(pci_cpm2_t, pci_cfg_addr),
diff --git a/arch/powerpc/sysdev/fsl_pcie.c b/arch/powerpc/sysdev/fsl_pcie.c
index 6bbd7f8..ea3ec6b 100644
--- a/arch/powerpc/sysdev/fsl_pcie.c
+++ b/arch/powerpc/sysdev/fsl_pcie.c
@@ -50,12 +50,12 @@ indirect_read_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset,
 	if (bus->number == 0xff) {
 		PCI_CFG_OUT(hose->cfg_addr,
 			    (0x80000000 | ((offset & 0xf00) << 16) |
-			     ((bus->number - hose->bus_offset) << 16)
+			     (bus->number<< 16)
 			     | (devfn << 8) | ((offset & 0xfc) )));
 	} else {
 		PCI_CFG_OUT(hose->cfg_addr,
 			    (0x80000001 | ((offset & 0xf00) << 16) |
-			     ((bus->number - hose->bus_offset) << 16)
+			     (bus->number<< 16)
 			     | (devfn << 8) | ((offset & 0xfc) )));
 	}
 
@@ -101,12 +101,12 @@ indirect_write_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset,
 	if (bus->number == 0xff) {
 		PCI_CFG_OUT(hose->cfg_addr,
 			    (0x80000000 | ((offset & 0xf00) << 16) |
-			     ((bus->number - hose->bus_offset) << 16)
+			     (bus->number << 16)
 			     | (devfn << 8) | ((offset & 0xfc) )));
 	} else {
 		PCI_CFG_OUT(hose->cfg_addr,
 			    (0x80000001 | ((offset & 0xf00) << 16) |
-			     ((bus->number - hose->bus_offset) << 16)
+			     (bus->number << 16)
 			     | (devfn << 8) | ((offset & 0xfc) )));
         }
 
-- 
1.5.2.1

[PATCH 06/15] [POWERPC] Added self_busno to indicate which bus number the PHB is

[Kumar Gala]

Added self_busno to pci_controller and indirect PCI ops to be set by
board code to indicate which bus number to use when talking to the PHB.
By default we use zero since the majority of controllers that have
implicit mechanisms to talk to the PHBs use a bus number of zero.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/indirect_pci.c |   12 ++++++++++--
 include/asm-ppc/pci-bridge.h       |    1 +
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index 3dedf8f..d490e71 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -33,6 +33,7 @@ indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 	struct pci_controller *hose = bus->sysdata;
 	volatile void __iomem *cfg_data;
 	u8 cfg_type = 0;
+	u32 bus_no;
 
 	if (ppc_md.pci_exclude_device)
 		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
@@ -42,8 +43,11 @@ indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		if (bus->number != hose->first_busno)
 			cfg_type = 1;
 
+	bus_no = (bus->number == hose->first_busno) ?
+			hose->self_busno : bus->number - hose->bus_offset;
+
 	PCI_CFG_OUT(hose->cfg_addr,
-		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
+		 (0x80000000 | (bus_no << 16)
 		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
 
 	/*
@@ -72,6 +76,7 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 	struct pci_controller *hose = bus->sysdata;
 	volatile void __iomem *cfg_data;
 	u8 cfg_type = 0;
+	u32 bus_no;
 
 	if (ppc_md.pci_exclude_device)
 		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
@@ -81,8 +86,11 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		if (bus->number != hose->first_busno)
 			cfg_type = 1;
 
+	bus_no = (bus->number == hose->first_busno) ?
+			hose->self_busno : bus->number - hose->bus_offset;
+
 	PCI_CFG_OUT(hose->cfg_addr,
-		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
+		 (0x80000000 | (bus_no << 16)
 		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
 
 	/*
diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h
index 4d35b84..2c2abda 100644
--- a/include/asm-ppc/pci-bridge.h
+++ b/include/asm-ppc/pci-bridge.h
@@ -47,6 +47,7 @@ struct pci_controller {
 
 	int first_busno;
 	int last_busno;
+	int self_busno;
 	int bus_offset;
 
 	void __iomem *io_base_virt;
-- 
1.5.2.1

[PATCH 07/15] [POWERPC] Removed remnants of bus_offset

[Kumar Gala]

Removed the remants of bus_offset and use self_busno in the mv64x60 case
and use pci_assign_all_buses on 83xx/85xx.

83xx/85xx have multiple PHBs and the firmwares on these devices tend not
to handle topologies with P2P bridges well so we let Linux just reassign
the bus numbers to match.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/83xx/pci.c  |    2 +-
 arch/powerpc/platforms/85xx/pci.c  |    2 +-
 arch/powerpc/sysdev/indirect_pci.c |    4 ++--
 arch/powerpc/sysdev/mv64x60_pci.c  |    2 +-
 include/asm-ppc/pci-bridge.h       |    1 +
 5 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c
index 8da935c..f49ed27 100644
--- a/arch/powerpc/platforms/83xx/pci.c
+++ b/arch/powerpc/platforms/83xx/pci.c
@@ -61,6 +61,7 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
 		       " bus 0\n", dev->full_name);
 	}
 
+	pci_assign_all_buses = 1;
 	hose = pcibios_alloc_controller();
 	if (!hose)
 		return -ENOMEM;
@@ -80,7 +81,6 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
 	if ((rsrc.start & 0xfffff) == 0x8600) {
 		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384);
 		primary = 0;
-		hose->bus_offset = hose->first_busno;
 	}
 
 	printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
diff --git a/arch/powerpc/platforms/85xx/pci.c b/arch/powerpc/platforms/85xx/pci.c
index be67f67..a25b3e7 100644
--- a/arch/powerpc/platforms/85xx/pci.c
+++ b/arch/powerpc/platforms/85xx/pci.c
@@ -55,6 +55,7 @@ int __init mpc85xx_add_bridge(struct device_node *dev)
 		       " bus 0\n", dev->full_name);
 	}
 
+	pci_assign_all_buses = 1;
 	hose = pcibios_alloc_controller();
 	if (!hose)
 		return -ENOMEM;
@@ -71,7 +72,6 @@ int __init mpc85xx_add_bridge(struct device_node *dev)
 	if ((rsrc.start & 0xfffff) == 0x9000) {
 		setup_indirect_pci(hose, immr + 0x9000, immr + 0x9004);
 		primary = 0;
-		hose->bus_offset = hose->first_busno;
 	}
 
 	printk(KERN_INFO "Found MPC85xx PCI host bridge at 0x%016llx. "
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index d490e71..efe3cff 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -44,7 +44,7 @@ indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 			cfg_type = 1;
 
 	bus_no = (bus->number == hose->first_busno) ?
-			hose->self_busno : bus->number - hose->bus_offset;
+			hose->self_busno : bus->number;
 
 	PCI_CFG_OUT(hose->cfg_addr,
 		 (0x80000000 | (bus_no << 16)
@@ -87,7 +87,7 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 			cfg_type = 1;
 
 	bus_no = (bus->number == hose->first_busno) ?
-			hose->self_busno : bus->number - hose->bus_offset;
+			hose->self_busno : bus->number;
 
 	PCI_CFG_OUT(hose->cfg_addr,
 		 (0x80000000 | (bus_no << 16)
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
index 6b08e76..2e77384 100644
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -147,7 +147,7 @@ static int __init mv64x60_add_bridge(struct device_node *dev)
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
 	setup_indirect_pci(hose, rsrc.start, rsrc.start + 4);
-	hose->bus_offset = hose->first_busno;
+	hose->self_busno = hose->first_busno;
 
 	printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. "
 	       "Firmware bus number: %d->%d\n",
diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h
index 2c2abda..70aab66 100644
--- a/include/asm-ppc/pci-bridge.h
+++ b/include/asm-ppc/pci-bridge.h
@@ -48,6 +48,7 @@ struct pci_controller {
 	int first_busno;
 	int last_busno;
 	int self_busno;
+	/* bus_offset is only used by ARCH=ppc */
 	int bus_offset;
 
 	void __iomem *io_base_virt;
-- 
1.5.2.1

[PATCH 08/15] [POWERPC] Remove PCI-e errata for MPC8641 silicon ver 1.0

[Kumar Gala]

From: Zhang Wei <wei.zhang@freescale.com>

Remove errata for PCI-e support of Rev 1.0 of MPC8641 since its considered
obselete and is not production level silicon from Freescale.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Acked-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/Kconfig                       |    4 -
 arch/powerpc/boot/dts/mpc8641_hpcn.dts     |    2 +-
 arch/powerpc/platforms/86xx/mpc86xx.h      |    6 -
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c |    2 -
 arch/powerpc/platforms/86xx/pci.c          |   18 +---
 arch/powerpc/platforms/Kconfig             |    1 -
 arch/powerpc/sysdev/Makefile               |    1 -
 arch/powerpc/sysdev/fsl_pcie.c             |  171 ----------------------------
 8 files changed, 3 insertions(+), 202 deletions(-)
 delete mode 100644 arch/powerpc/sysdev/fsl_pcie.c

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 6324abd..b79256a 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -424,10 +424,6 @@ config SBUS
 config FSL_SOC
 	bool
 
-config FSL_PCIE
-	bool
-	depends on PPC_86xx
-
 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
 config MCA
 	bool
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 260b264..748f7b9 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -186,7 +186,7 @@
 			#size-cells = <2>;
 			#address-cells = <3>;
 			reg = <8000 1000>;
-			bus-range = <0 fe>;
+			bus-range = <0 ff>;
 			ranges = <02000000 0 80000000 80000000 0 20000000
 				  01000000 0 00000000 e2000000 0 00100000>;
 			clock-frequency = <1fca055>;
diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h
index 4c2789d..23f7ed2 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx.h
+++ b/arch/powerpc/platforms/86xx/mpc86xx.h
@@ -20,12 +20,6 @@ extern int mpc86xx_add_bridge(struct device_node *dev);
 extern int mpc86xx_exclude_device(struct pci_controller *hose,
 				  u_char bus, u_char devfn);
 
-extern void setup_indirect_pcie(struct pci_controller *hose,
-				       u32 cfg_addr, u32 cfg_data);
-extern void setup_indirect_pcie_nomap(struct pci_controller *hose,
-					     void __iomem *cfg_addr,
-					     void __iomem *cfg_data);
-
 extern void __init mpc86xx_smp_init(void);
 
 #endif	/* __MPC86XX_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 042dbce..afa8237 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -358,8 +358,6 @@ mpc86xx_hpcn_setup_arch(void)
 #ifdef CONFIG_PCI
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		mpc86xx_add_bridge(np);
-
-	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
 #endif
 
 	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
index 7659259..0db51e8 100644
--- a/arch/powerpc/platforms/86xx/pci.c
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -133,19 +133,6 @@ mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
 	early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
 
 	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
-
-	/* PCIE Bus, Fix the MPC8641D host bridge's location to bus 0xFF. */
-	early_read_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, &temps);
-	temps = (temps & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16);
-	early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps);
-}
-
-int mpc86xx_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
-{
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return PCIBIOS_SUCCESSFUL;
 }
 
 int __init mpc86xx_add_bridge(struct device_node *dev)
@@ -173,11 +160,10 @@ int __init mpc86xx_add_bridge(struct device_node *dev)
 		return -ENOMEM;
 	hose->arch_data = dev;
 
-	/* last_busno = 0xfe cause by MPC8641 PCIE bug */
 	hose->first_busno = bus_range ? bus_range[0] : 0x0;
-	hose->last_busno = bus_range ? bus_range[1] : 0xfe;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
-	setup_indirect_pcie(hose, rsrc.start, rsrc.start + 0x4);
+	setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4);
 
 	/* Setup the PCIE host controller. */
 	mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1);
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index df67ff5..33545d3 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -31,7 +31,6 @@ config PPC_86xx
 	bool "Freescale 86xx"
 	depends on 6xx
 	select FSL_SOC
-	select FSL_PCIE
 	select ALTIVEC
 	help
 	  The Freescale E600 SoCs have 74xx cores.
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 43fd7e0..b991b78 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_PPC_PMI)		+= pmi.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
-obj-$(CONFIG_FSL_PCIE)		+= fsl_pcie.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
 mv64x60-$(CONFIG_PCI)		+= mv64x60_pci.o
diff --git a/arch/powerpc/sysdev/fsl_pcie.c b/arch/powerpc/sysdev/fsl_pcie.c
deleted file mode 100644
index ea3ec6b..0000000
--- a/arch/powerpc/sysdev/fsl_pcie.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Support for indirect PCI bridges.
- *
- * Copyright (C) 1998 Gabriel Paubert.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * "Temporary" MPC8548 Errata file -
- * The standard indirect_pci code should work with future silicon versions.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-
-#define PCI_CFG_OUT out_be32
-
-/* ERRATA PCI-Ex 14 PCIE Controller timeout */
-#define PCIE_FIX		out_be32(hose->cfg_addr+0x4, 0x0400ffff)
-
-
-static int
-indirect_read_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset,
-		     int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-	u32 temp;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/* Possible artifact of CDCpp50937 needs further investigation */
-	if (devfn != 0x0 && bus->number == 0xff)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	PCIE_FIX;
-	if (bus->number == 0xff) {
-		PCI_CFG_OUT(hose->cfg_addr,
-			    (0x80000000 | ((offset & 0xf00) << 16) |
-			     (bus->number<< 16)
-			     | (devfn << 8) | ((offset & 0xfc) )));
-	} else {
-		PCI_CFG_OUT(hose->cfg_addr,
-			    (0x80000001 | ((offset & 0xf00) << 16) |
-			     (bus->number<< 16)
-			     | (devfn << 8) | ((offset & 0xfc) )));
-	}
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	/* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
-	cfg_data = hose->cfg_data;
-	PCIE_FIX;
-	temp = in_le32(cfg_data);
-	switch (len) {
-	case 1:
-		*val = (temp >> (((offset & 3))*8)) & 0xff;
-		break;
-	case 2:
-		*val = (temp >> (((offset & 3))*8)) & 0xffff;
-		break;
-	default:
-		*val = temp;
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-indirect_write_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset,
-		      int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-	u32 temp;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/* Possible artifact of CDCpp50937 needs further investigation */
-	if (devfn != 0x0 && bus->number == 0xff)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	PCIE_FIX;
-	if (bus->number == 0xff) {
-		PCI_CFG_OUT(hose->cfg_addr,
-			    (0x80000000 | ((offset & 0xf00) << 16) |
-			     (bus->number << 16)
-			     | (devfn << 8) | ((offset & 0xfc) )));
-	} else {
-		PCI_CFG_OUT(hose->cfg_addr,
-			    (0x80000001 | ((offset & 0xf00) << 16) |
-			     (bus->number << 16)
-			     | (devfn << 8) | ((offset & 0xfc) )));
-        }
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	/* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
-	cfg_data = hose->cfg_data;
-	switch (len) {
-	case 1:
-		PCIE_FIX;
-		temp = in_le32(cfg_data);
-		temp = (temp & ~(0xff << ((offset & 3) * 8))) |
-			(val << ((offset & 3) * 8));
-		PCIE_FIX;
-		out_le32(cfg_data, temp);
-		break;
-	case 2:
-		PCIE_FIX;
-		temp = in_le32(cfg_data);
-		temp = (temp & ~(0xffff << ((offset & 3) * 8)));
-		temp |= (val << ((offset & 3) * 8)) ;
-		PCIE_FIX;
-		out_le32(cfg_data, temp);
-		break;
-	default:
-		PCIE_FIX;
-		out_le32(cfg_data, val);
-		break;
-	}
-	PCIE_FIX;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pcie_ops = {
-	indirect_read_config_pcie,
-	indirect_write_config_pcie
-};
-
-void __init
-setup_indirect_pcie_nomap(struct pci_controller* hose, void __iomem * cfg_addr,
-	void __iomem * cfg_data)
-{
-	hose->cfg_addr = cfg_addr;
-	hose->cfg_data = cfg_data;
-	hose->ops = &indirect_pcie_ops;
-}
-
-void __init
-setup_indirect_pcie(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
-{
-	unsigned long base = cfg_addr & PAGE_MASK;
-	void __iomem *mbase, *addr, *data;
-
-	mbase = ioremap(base, PAGE_SIZE);
-	addr = mbase + (cfg_addr & ~PAGE_MASK);
-	if ((cfg_data & PAGE_MASK) != base)
-		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
-	data = mbase + (cfg_data & ~PAGE_MASK);
-	setup_indirect_pcie_nomap(hose, addr, data);
-}
-- 
1.5.2.1

[PATCH 09/15] [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

[Kumar Gala]

From: Wade Farnsworth <wfarnsworth@mvista.com>

This adds device nodes for the PCI bridges as well as the ISA devices on
the newer revision MPC8641HPCN.  It also adds the PCI ranges to the soc
node so that address translation for the ISA devices works properly.

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8641_hpcn.dts |   97 +++++++++++++++++++++++++++----
 1 files changed, 84 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 748f7b9..393cfdf 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -56,8 +56,12 @@
 		#size-cells = <1>;
 		#interrupt-cells = <2>;
 		device_type = "soc";
-		ranges = <0 f8000000 00100000>;
-		reg = <f8000000 00100000>;	// CCSRBAR 1M
+		ranges = <00001000 f8001000 000ff000
+			  80000000 80000000 20000000
+			  e2000000 e2000000 00100000
+			  a0000000 a0000000 20000000
+			  e3000000 e3000000 00100000>;
+		reg = <f8000000 00001000>;	// CCSRBAR
 		bus-frequency = <0>;
 
 		i2c@3000 {
@@ -285,17 +289,84 @@
 				f800 0 0 3 &i8259 0 0
 				f800 0 0 4 &i8259 0 0
 				>;
-			i8259: i8259@4d0 {
-				clock-frequency = <0>;
-				interrupt-controller;
-				device_type = "interrupt-controller";
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				built-in;
-				compatible = "chrp,iic";
-                	        big-endian;
-				interrupts = <49 2>;
-				interrupt-parent = <&mpic>;
+			uli1575@0 {
+				reg = <0 0 0 0 0>;
+				#size-cells = <2>;
+				#address-cells = <3>;
+				ranges = <02000000 0 80000000
+					  02000000 0 80000000
+					  0 20000000
+					  01000000 0 00000000
+					  01000000 0 00000000
+					  0 00100000>;
+
+				pci_bridge@0 {
+					reg = <0 0 0 0 0>;
+					#size-cells = <2>;
+					#address-cells = <3>;
+					ranges = <02000000 0 80000000
+						  02000000 0 80000000
+						  0 20000000
+						  01000000 0 00000000
+						  01000000 0 00000000
+						  0 00100000>;
+
+					isa@1e {
+						device_type = "isa";
+						#interrupt-cells = <2>;
+						#size-cells = <1>;
+						#address-cells = <2>;
+						reg = <f000 0 0 0 0>;
+						ranges = <1 0 01000000 0 0
+							  00001000>;
+						interrupt-parent = <&i8259>;
+
+						i8259: interrupt-controller@20 {
+							reg = <1 20 2
+							       1 a0 2
+							       1 4d0 2>;
+							clock-frequency = <0>;
+							interrupt-controller;
+							device_type = "interrupt-controller";
+							#address-cells = <0>;
+							#interrupt-cells = <2>;
+							built-in;
+							compatible = "chrp,iic";
+							interrupts = <49 2>;
+							interrupt-parent =
+								<&mpic>;
+						};
+
+						i8042@60 {
+							#size-cells = <0>;
+							#address-cells = <1>;
+							reg = <1 60 1 1 64 1>;
+							interrupts = <1 3 c 3>;
+							interrupt-parent =
+								<&i8259>;
+
+							keyboard@0 {
+								reg = <0>;
+								compatible = "pnpPNP,303";
+							};
+
+							mouse@1 {
+								reg = <1>;
+								compatible = "pnpPNP,f03";
+							};
+						};
+
+						rtc@70 {
+							compatible =
+								"pnpPNP,b00";
+							reg = <1 70 2>;
+						};
+
+						gpio@400 {
+							reg = <1 400 80>;
+						};
+					};
+				};
 			};
 
 		};
-- 
1.5.2.1

[PATCH 10/15] [POWERPC] Added indirect_type to handle variants of PCI ops

[Kumar Gala]

The generic PCI config ops indirect support for ppc32 covers only two
cases (implicit vs explicit) type 0/1 config cycles via set_cfg_type.
Added a indirect_type bit mask to handle other variants.

Added support for PCI-e extended registers and moved the cfg_type
handling into the bit mask for ARCH=powerpc.  We can also use this to
handle indirect quirks.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/indirect_pci.c |   22 ++++++++++++++++------
 include/asm-ppc/pci-bridge.h       |   10 ++++++++++
 2 files changed, 26 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index efe3cff..3a16122 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -33,22 +33,27 @@ indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 	struct pci_controller *hose = bus->sysdata;
 	volatile void __iomem *cfg_data;
 	u8 cfg_type = 0;
-	u32 bus_no;
+	u32 bus_no, reg;
 
 	if (ppc_md.pci_exclude_device)
 		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
 			return PCIBIOS_DEVICE_NOT_FOUND;
 	
-	if (hose->set_cfg_type)
+	if (hose->indirect_type & PPC_INDIRECT_TYPE_SET_CFG_TYPE)
 		if (bus->number != hose->first_busno)
 			cfg_type = 1;
 
 	bus_no = (bus->number == hose->first_busno) ?
 			hose->self_busno : bus->number;
 
+	if (hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG)
+		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
+	else
+		reg = offset & 0xfc;
+
 	PCI_CFG_OUT(hose->cfg_addr,
 		 (0x80000000 | (bus_no << 16)
-		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
+		  | (devfn << 8) | reg | cfg_type));
 
 	/*
 	 * Note: the caller has already checked that offset is
@@ -76,22 +81,27 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 	struct pci_controller *hose = bus->sysdata;
 	volatile void __iomem *cfg_data;
 	u8 cfg_type = 0;
-	u32 bus_no;
+	u32 bus_no, reg;
 
 	if (ppc_md.pci_exclude_device)
 		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
 			return PCIBIOS_DEVICE_NOT_FOUND;
 
-	if (hose->set_cfg_type)
+	if (hose->indirect_type & PPC_INDIRECT_TYPE_SET_CFG_TYPE)
 		if (bus->number != hose->first_busno)
 			cfg_type = 1;
 
 	bus_no = (bus->number == hose->first_busno) ?
 			hose->self_busno : bus->number;
 
+	if (hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG)
+		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
+	else
+		reg = offset & 0xfc;
+
 	PCI_CFG_OUT(hose->cfg_addr,
 		 (0x80000000 | (bus_no << 16)
-		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
+		  | (devfn << 8) | reg | cfg_type));
 
 	/*
 	 * Note: the caller has already checked that offset is
diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h
index 70aab66..0dee56b 100644
--- a/include/asm-ppc/pci-bridge.h
+++ b/include/asm-ppc/pci-bridge.h
@@ -65,9 +65,19 @@ struct pci_controller {
 	/*
 	 * If set, indirect method will set the cfg_type bit as
 	 * needed to generate type 1 configuration transactions.
+	 * use only on ARCH=ppc
 	 */
 	int set_cfg_type;
 
+	/*
+	 * Used for variants of PCI indirect handling and possible quirks:
+	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
+	 *  EXT_REG - provides access to PCI-e extended registers
+	 */
+#define PPC_INDIRECT_TYPE_SET_CFG_TYPE		(0x00000001)
+#define PPC_INDIRECT_TYPE_EXT_REG		(0x00000002)
+	u32 indirect_type;
+
 	/* Currently, we limit ourselves to 1 IO range and 3 mem
 	 * ranges since the common pci_bus structure can't handle more
 	 */
-- 
1.5.2.1

[PATCH 11/15] [POWERPC] 86xx: Avoid system halt if link training isn't at least L0.

[Kumar Gala]

From: Zhang Wei <wei.zhang@freescale.com>

We check the Link Training and State Status register to make sure we
are at least at the L0 state.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Acked-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/86xx/pci.c |   11 ++++++++++-
 1 files changed, 10 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
index 0db51e8..3825e1a 100644
--- a/arch/powerpc/platforms/86xx/pci.c
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -122,7 +122,6 @@ static void __init
 mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
 {
 	u16 cmd;
-	unsigned int temps;
 
 	DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n",
 			pcie_offset, pcie_size);
@@ -135,6 +134,9 @@ mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
 	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
 }
 
+#define PCIE_LTSSM	0x404	/* PCIe Link Training and Status */
+#define PCIE_LTSSM_L0	0x16	/* L0 state */
+
 int __init mpc86xx_add_bridge(struct device_node *dev)
 {
 	int len;
@@ -143,6 +145,7 @@ int __init mpc86xx_add_bridge(struct device_node *dev)
 	const int *bus_range;
 	int has_address = 0;
 	int primary = 0;
+	u16 val;
 
 	DBG("Adding PCIE host bridge %s\n", dev->full_name);
 
@@ -159,12 +162,18 @@ int __init mpc86xx_add_bridge(struct device_node *dev)
 	if (!hose)
 		return -ENOMEM;
 	hose->arch_data = dev;
+	hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0x0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
 	setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4);
 
+	/* Probe the hose link training status */
+	early_read_config_word(hose, 0, 0, PCIE_LTSSM, &val);
+	if (val < PCIE_LTSSM_L0)
+		return -ENXIO;
+
 	/* Setup the PCIE host controller. */
 	mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1);
 
-- 
1.5.2.1

[PATCH 12/15] [POWERPC] 86xx: Workaround PCI_PRIMARY_BUS usage

[Kumar Gala]

The Freescale PCI-e controllers have an issue in that they use the
PCI_PRIMARY_BUS register in the virtual P2P bridge to determine which
bus number to match on when generating a type 0 config cycle.  The
issue is if we are renumbering bus numbers to match Linux we will try
setting the PCI_PRIMARY_BUS and will not know which bus number to use
for generating type 0 config cycles.  We surpress writing the register
in the P2P bridge and always keep it at zero.

In the future when proper PCI domain support is working we should be
able to remove this.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/86xx/pci.c  |    4 +++-
 arch/powerpc/sysdev/indirect_pci.c |    6 ++++++
 include/asm-ppc/pci-bridge.h       |    5 +++++
 3 files changed, 14 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
index 3825e1a..6f3c0f6 100644
--- a/arch/powerpc/platforms/86xx/pci.c
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -158,11 +158,13 @@ int __init mpc86xx_add_bridge(struct device_node *dev)
 		printk(KERN_WARNING "Can't get bus-range for %s, assume"
 		       " bus 0\n", dev->full_name);
 
+	pci_assign_all_buses = 1;
 	hose = pcibios_alloc_controller();
 	if (!hose)
 		return -ENOMEM;
 	hose->arch_data = dev;
-	hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG;
+	hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG |
+				PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0x0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index 3a16122..c7e6e85 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -103,6 +103,12 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		 (0x80000000 | (bus_no << 16)
 		  | (devfn << 8) | reg | cfg_type));
 
+	/* surpress setting of PCI_PRIMARY_BUS */
+	if (hose->indirect_type & PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
+		if ((offset == PCI_PRIMARY_BUS) &&
+			(bus->number == hose->first_busno))
+		val &= 0xffffff00;
+
 	/*
 	 * Note: the caller has already checked that offset is
 	 * suitably aligned and that len is 1, 2 or 4.
diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h
index 0dee56b..c09fbf0 100644
--- a/include/asm-ppc/pci-bridge.h
+++ b/include/asm-ppc/pci-bridge.h
@@ -73,9 +73,14 @@ struct pci_controller {
 	 * Used for variants of PCI indirect handling and possible quirks:
 	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
 	 *  EXT_REG - provides access to PCI-e extended registers
+	 *  SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
+	 *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
+	 *   to determine which bus number to match on when generating type0
+	 *   config cycles
 	 */
 #define PPC_INDIRECT_TYPE_SET_CFG_TYPE		(0x00000001)
 #define PPC_INDIRECT_TYPE_EXT_REG		(0x00000002)
+#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS	(0x00000004)
 	u32 indirect_type;
 
 	/* Currently, we limit ourselves to 1 IO range and 3 mem
-- 
1.5.2.1

[PATCH 13/15] [POWERPC] MPC8641HPCN: Set IDE in ULI1575 to not native mode.

[Kumar Gala]

From: Zhang Wei <wei.zhang@freescale.com>

Set IDE in ULI1575 to not 100% native mode, which forces
the IDE driver to probe the irq itself.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index afa8237..62b8a14 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -312,6 +312,7 @@ static void __devinit quirk_uli5229(struct pci_dev *dev)
 {
 	unsigned short temp;
 	pci_write_config_word(dev, 0x04, 0x0405);
+	dev->class &= ~0x5;
 	pci_read_config_word(dev, 0x4a, &temp);
 	temp |= 0x1000;
 	pci_write_config_word(dev, 0x4a, temp);
-- 
1.5.2.1

[PATCH 14/15] [POWERPC] Let subordinate transparent bridges be transparent.

[Kumar Gala]

From: York Sun <yorksun@freescale.com>

In pcibios_fixup_bus(), bridges that are subordinate
to transparent bridges were still relocating their
IORESOURCE_IO and IO_RESOURCE_MEM start and end values.

Fix this by preventing the transparent bridge from
relocating the start and end values, thus allowing the
subordinate non-transparent bridge full molestation rights.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/kernel/pci_32.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index e66064b..7738a28 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -1370,7 +1370,7 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
 		for (i = 0; i < 4; ++i) {
 			if ((res = bus->resource[i]) == NULL)
 				continue;
-			if (!res->flags)
+			if (!res->flags || bus->self->transparent)
 				continue;
 			if (io_offset && (res->flags & IORESOURCE_IO)) {
 				res->start += io_offset;
-- 
1.5.2.1

[PATCH 15/15] [POWERPC] 86xx: Created quirk_fsl_pcie_transparent() to initialize bridge resources.

[Kumar Gala]

From: Zhang Wei <wei.zhang@freescale.com>

The Freescale PCI-e RC poses as a transparent bridge, but does not
implement the IO_BASE or IO_LIMIT registers in the config space.  This
means that the code which initializes the bridge resources ends up
setting the IO resources erroneously.  Add quick_fsl_pcie_transparent()
to handle this.

This change sets RC of mpc8641 to be a transparent bridge
for legacy I/O access and initializes the RC bridge resources
from the device tree.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/86xx/pci.c |   37 +++++++++++++++++++++++++++++++++++++
 1 files changed, 37 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
index 6f3c0f6..2d7254c 100644
--- a/arch/powerpc/platforms/86xx/pci.c
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -134,6 +134,43 @@ mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
 	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
 }
 
+static void __devinit quirk_fsl_pcie_transparent(struct pci_dev *dev)
+{
+	struct resource *res;
+	int i, res_idx = PCI_BRIDGE_RESOURCES;
+	struct pci_controller *hose;
+
+	/*
+	 * Make the bridge be transparent.
+	 */
+	dev->transparent = 1;
+
+	hose = pci_bus_to_hose(dev->bus->number);
+	if (!hose) {
+		printk(KERN_ERR "Can't find hose for bus %d\n",
+		       dev->bus->number);
+		return;
+	}
+
+	if (hose->io_resource.flags) {
+		res = &dev->resource[res_idx++];
+		res->start = hose->io_resource.start;
+		res->end = hose->io_resource.end;
+		res->flags = hose->io_resource.flags;
+	}
+
+	for (i = 0; i < 3; i++) {
+		res = &dev->resource[res_idx + i];
+		res->start = hose->mem_resources[i].start;
+		res->end = hose->mem_resources[i].end;
+		res->flags = hose->mem_resources[i].flags;
+	}
+}
+
+
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7010, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7011, quirk_fsl_pcie_transparent);
+
 #define PCIE_LTSSM	0x404	/* PCIe Link Training and Status */
 #define PCIE_LTSSM_L0	0x16	/* L0 state */
 
-- 
1.5.2.1

Re: [PATCH 09/15] [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

[Andy Fleming]

On Jun 26, 2007, at 20:16, Kumar Gala wrote:

> From: Wade Farnsworth <wfarnsworth@mvista.com>
>
> This adds device nodes for the PCI bridges as well as the ISA  
> devices on
> the newer revision MPC8641HPCN.  It also adds the PCI ranges to the  
> soc
> node so that address translation for the ISA devices works properly.

>
> -		ranges = <0 f8000000 00100000>;
> -		reg = <f8000000 00100000>;	// CCSRBAR 1M
> +		ranges = <00001000 f8001000 000ff000
[...]
> +		reg = <f8000000 00001000>;	// CCSRBAR


This can't be right, and I suspect it will break any kernel access to  
the first 0x1000 bytes of the CCSR_BAR space.  reg should actually  
describe the register space of the SOC.  If ranges needs to specify  
that, too, they should be able to be redundant.  But this looks like  
a big hack, to me.  Am I missing something?


Andy

Re: [PATCH 09/15] [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

[Segher Boessenkool]

>> -		ranges = <0 f8000000 00100000>;
>> -		reg = <f8000000 00100000>;	// CCSRBAR 1M
>> +		ranges = <00001000 f8001000 000ff000
> [...]
>> +		reg = <f8000000 00001000>;	// CCSRBAR
>
> This can't be right, and I suspect it will break any kernel access to
> the first 0x1000 bytes of the CCSR_BAR space.  reg should actually
> describe the register space of the SOC.  If ranges needs to specify
> that, too, they should be able to be redundant.  But this looks like
> a big hack, to me.  Am I missing something?

"reg" and "ranges" can never overlap really.

Is this the special case where the PHB is visible in
PCI configuration space?

Or, please explain what CCSR_BAR is...


Segher

Re: [PATCH 09/15] [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

[Kumar Gala]

On Jun 27, 2007, at 3:39 PM, Segher Boessenkool wrote:

>>> -		ranges = <0 f8000000 00100000>;
>>> -		reg = <f8000000 00100000>;	// CCSRBAR 1M
>>> +		ranges = <00001000 f8001000 000ff000
>> [...]
>>> +		reg = <f8000000 00001000>;	// CCSRBAR
>>
>> This can't be right, and I suspect it will break any kernel access to
>> the first 0x1000 bytes of the CCSR_BAR space.  reg should actually
>> describe the register space of the SOC.  If ranges needs to specify
>> that, too, they should be able to be redundant.  But this looks like
>> a big hack, to me.  Am I missing something?
>
> "reg" and "ranges" can never overlap really.
>
> Is this the special case where the PHB is visible in
> PCI configuration space?
>
> Or, please explain what CCSR_BAR is...

Its a 1M MMIO register space on the SOC (all device registers on the  
SOC live there).

- k

Re: [PATCH 09/15] [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

[Segher Boessenkool]

>>>> -		ranges = <0 f8000000 00100000>;
>>>> -		reg = <f8000000 00100000>;	// CCSRBAR 1M
>>>> +		ranges = <00001000 f8001000 000ff000
>>> [...]
>>>> +		reg = <f8000000 00001000>;	// CCSRBAR
>>>
>>> This can't be right, and I suspect it will break any kernel access to
>>> the first 0x1000 bytes of the CCSR_BAR space.  reg should actually
>>> describe the register space of the SOC.  If ranges needs to specify
>>> that, too, they should be able to be redundant.  But this looks like
>>> a big hack, to me.  Am I missing something?
>>
>> "reg" and "ranges" can never overlap really.
>>
>> Is this the special case where the PHB is visible in
>> PCI configuration space?
>>
>> Or, please explain what CCSR_BAR is...
>
> Its a 1M MMIO register space on the SOC (all device registers on the 
> SOC live there).

Okay, so it has nothing to do with PCI configuration space?

There is "BAR" in the name, so it is a movable range?  Where
is the base address set?

What is the relationship between (in the example) the address
ranges x'f800_0000+1000 and x'f800_1000+ff000?


Segher

Re: [PATCH 09/15] [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

[Kumar Gala]

On Jun 27, 2007, at 3:57 PM, Segher Boessenkool wrote:

>>>>> -		ranges = <0 f8000000 00100000>;
>>>>> -		reg = <f8000000 00100000>;	// CCSRBAR 1M
>>>>> +		ranges = <00001000 f8001000 000ff000
>>>> [...]
>>>>> +		reg = <f8000000 00001000>;	// CCSRBAR
>>>>
>>>> This can't be right, and I suspect it will break any kernel  
>>>> access to
>>>> the first 0x1000 bytes of the CCSR_BAR space.  reg should actually
>>>> describe the register space of the SOC.  If ranges needs to specify
>>>> that, too, they should be able to be redundant.  But this looks  
>>>> like
>>>> a big hack, to me.  Am I missing something?
>>>
>>> "reg" and "ranges" can never overlap really.
>>>
>>> Is this the special case where the PHB is visible in
>>> PCI configuration space?
>>>
>>> Or, please explain what CCSR_BAR is...
>>
>> Its a 1M MMIO register space on the SOC (all device registers on  
>> the SOC live there).
>
> Okay, so it has nothing to do with PCI configuration space?

correct

> There is "BAR" in the name, so it is a movable range?  Where
> is the base address set?

in a MMIO register in the space itself.

> What is the relationship between (in the example) the address
> ranges x'f800_0000+1000 and x'f800_1000+ff000?

uugh, not sure what that's all about.

- k

Re: [PATCH 09/15] [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

[Segher Boessenkool]

>>>>>> -		ranges = <0 f8000000 00100000>;
>>>>>> -		reg = <f8000000 00100000>;	// CCSRBAR 1M
>>>>>> +		ranges = <00001000 f8001000 000ff000
>>>>>> +		reg = <f8000000 00001000>;	// CCSRBAR

>> There is "BAR" in the name, so it is a movable range?  Where
>> is the base address set?
>
> in a MMIO register in the space itself.

Oh, *great* design.</sarcasm>

>> What is the relationship between (in the example) the address
>> ranges x'f800_0000+1000 and x'f800_1000+ff000?
>
> uugh, not sure what that's all about.

Reading back I see that the CCSR region is 1MB, and only the
first 4kB are for this PHB.  What is the rest of this range
used for -- devices on this PCI bus, other SoC devices, ...?


Segher

Re: [PATCH 09/15] [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

[Kumar Gala]

On Jun 27, 2007, at 4:21 PM, Segher Boessenkool wrote:

>>>>>>> -		ranges = <0 f8000000 00100000>;
>>>>>>> -		reg = <f8000000 00100000>;	// CCSRBAR 1M
>>>>>>> +		ranges = <00001000 f8001000 000ff000
>>>>>>> +		reg = <f8000000 00001000>;	// CCSRBAR
>
>>> There is "BAR" in the name, so it is a movable range?  Where
>>> is the base address set?
>>
>> in a MMIO register in the space itself.
>
> Oh, *great* design.</sarcasm>

its not that bad ;)

>>> What is the relationship between (in the example) the address
>>> ranges x'f800_0000+1000 and x'f800_1000+ff000?
>>
>> uugh, not sure what that's all about.
>
> Reading back I see that the CCSR region is 1MB, and only the
> first 4kB are for this PHB.  What is the rest of this range
> used for -- devices on this PCI bus, other SoC devices, ...?

No, the first 4kB are SOC/platform level config registers (high level  
window setup, CCSR location, etc).

The PHB registers are somewhere in the middle (0x8000, I think).  All  
the children devices (enet, PHBs, etc) live in the 1M block.

I think my original idea was the reg property on the SOC node was for  
the first 4k block that held the SOC config registers.  I think what  
Wade did is correct since the reg property on the SOC node isnt going  
to get translated through the ranges property and that they should be  
mutually exclusive.

- k

Re: [PATCH 09/15] [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

[Segher Boessenkool]

>>>>>>>> -		ranges = <0 f8000000 00100000>;
>>>>>>>> -		reg = <f8000000 00100000>;	// CCSRBAR 1M
>>>>>>>> +		ranges = <00001000 f8001000 000ff000
>>>>>>>> +		reg = <f8000000 00001000>;	// CCSRBAR
>>
>>>> There is "BAR" in the name, so it is a movable range?  Where
>>>> is the base address set?
>>>
>>> in a MMIO register in the space itself.
>>
>> Oh, *great* design.</sarcasm>
>
> its not that bad ;)

Well there's no way to configure it if the current
configuration is screwed, or you just don't know
what the current configuration is.  Anyway, that's
all beside the point here.

>>>> What is the relationship between (in the example) the address
>>>> ranges x'f800_0000+1000 and x'f800_1000+ff000?
>>>
>>> uugh, not sure what that's all about.
>>
>> Reading back I see that the CCSR region is 1MB, and only the
>> first 4kB are for this PHB.  What is the rest of this range
>> used for -- devices on this PCI bus, other SoC devices, ...?
>
> No, the first 4kB are SOC/platform level config registers (high level 
> window setup, CCSR location, etc).
>
> The PHB registers are somewhere in the middle (0x8000, I think).  All 
> the children devices (enet, PHBs, etc) live in the 1M block.

So:

-- CCSR doesn't sit on PCI at all
-- It is a SoC register space
-- And it is only needed for configuration, not for normal
    operation? ( <-- I so much hope this one is true!)

> I think my original idea was the reg property on the SOC node was for 
> the first 4k block that held the SOC config registers.  I think what 
> Wade did is correct since the reg property on the SOC node isnt going 
> to get translated through the ranges property and that they should be 
> mutually exclusive.

Yeah but I'm wondering about the other devices on CCSR now...


Segher

Re: [PATCH 09/15] [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

[Andy Fleming]

On Jun 27, 2007, at 17:51, Kumar Gala wrote:

>
>>>> What is the relationship between (in the example) the address
>>>> ranges x'f800_0000+1000 and x'f800_1000+ff000?
>>>
>>> uugh, not sure what that's all about.
>>
>> Reading back I see that the CCSR region is 1MB, and only the
>> first 4kB are for this PHB.  What is the rest of this range
>> used for -- devices on this PCI bus, other SoC devices, ...?
>
> No, the first 4kB are SOC/platform level config registers (high  
> level window setup, CCSR location, etc).
>
> The PHB registers are somewhere in the middle (0x8000, I think).   
> All the children devices (enet, PHBs, etc) live in the 1M block.
>
> I think my original idea was the reg property on the SOC node was  
> for the first 4k block that held the SOC config registers.  I think  
> what Wade did is correct since the reg property on the SOC node  
> isnt going to get translated through the ranges property and that  
> they should be mutually exclusive.


Ok, I'm thinking we don't need the reg property at all, or that it  
can be of size 0 or 4 (the CCSRBAR, itself).  If we need to access  
registers in the first 4k, we can define reg properties for the  
submodules which are in the CCSR space.

My issue with the submitted option is that the first 4k don't really  
belong to an SOC "device", they are just the first 4k of registers.   
In this case, they are the Local Access Window registers.  It sort of  
feels like we're arbitrarily deciding assigning the first 4k to the  
"SOC".  If that's what we want to do, I'd like if we put it in  
booting-without-of.txt.  Actually, it should go there, anyway.

Andy

Re: [PATCH 09/15] [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

[David Gibson]

On Wed, Jun 27, 2007 at 10:39:14PM +0200, Segher Boessenkool wrote:
> >> -		ranges = <0 f8000000 00100000>;
> >> -		reg = <f8000000 00100000>;	// CCSRBAR 1M
> >> +		ranges = <00001000 f8001000 000ff000
> > [...]
> >> +		reg = <f8000000 00001000>;	// CCSRBAR
> >
> > This can't be right, and I suspect it will break any kernel access to
> > the first 0x1000 bytes of the CCSR_BAR space.  reg should actually
> > describe the register space of the SOC.  If ranges needs to specify
> > that, too, they should be able to be redundant.  But this looks like
> > a big hack, to me.  Am I missing something?
> 
> "reg" and "ranges" can never overlap really.

Is this really true, always?

What about something like a PReP PCI bridge, which has the registers
for indirect config-space access in the same range as the ISA IO
space?

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

Re: [PATCH 09/15] [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

[Segher Boessenkool]

>>> This can't be right, and I suspect it will break any kernel access to
>>> the first 0x1000 bytes of the CCSR_BAR space.  reg should actually
>>> describe the register space of the SOC.  If ranges needs to specify
>>> that, too, they should be able to be redundant.  But this looks like
>>> a big hack, to me.  Am I missing something?
>>
>> "reg" and "ranges" can never overlap really.
>
> Is this really true, always?

Well think about it.  "reg" is the addresses your bridge
device's registers sit at.  "ranges" is the addresses your
bridge translates to its child bus.

> What about something like a PReP PCI bridge, which has the registers
> for indirect config-space access in the same range as the ISA IO
> space?

Yeah there are always nasty corner cases that are hard
to express.  Like a PHB that is visible as a device on
its own PCI bus -- it would have to be its own child in
the device tree!  Such devices are best dealt with on
a one-by-one basis.


Segher

Re: [PATCH 07/15] [POWERPC] Removed remnants of bus_offset

[David Gibson]

On Tue, Jun 26, 2007 at 08:16:37PM -0500, Kumar Gala wrote:
> Removed the remants of bus_offset and use self_busno in the mv64x60 case
> and use pci_assign_all_buses on 83xx/85xx.
> 
> 83xx/85xx have multiple PHBs and the firmwares on these devices tend not
> to handle topologies with P2P bridges well so we let Linux just reassign
> the bus numbers to match.

[snip]
> diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h
> index 2c2abda..70aab66 100644
> --- a/include/asm-ppc/pci-bridge.h
> +++ b/include/asm-ppc/pci-bridge.h
> @@ -48,6 +48,7 @@ struct pci_controller {
>  	int first_busno;
>  	int last_busno;
>  	int self_busno;
> +	/* bus_offset is only used by ARCH=ppc */
>  	int bus_offset;
>  
>  	void __iomem *io_base_virt;

Might be a good time to copy asm-ppc/pci-bridge.h to
asm-powerpc/pci-bridge-32.h, yeah?

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

Re: [PATCH 07/15] [POWERPC] Removed remnants of bus_offset

[Kumar Gala]

On Jun 26, 2007, at 8:22 PM, David Gibson wrote:

> On Tue, Jun 26, 2007 at 08:16:37PM -0500, Kumar Gala wrote:
>> Removed the remants of bus_offset and use self_busno in the  
>> mv64x60 case
>> and use pci_assign_all_buses on 83xx/85xx.
>>
>> 83xx/85xx have multiple PHBs and the firmwares on these devices  
>> tend not
>> to handle topologies with P2P bridges well so we let Linux just  
>> reassign
>> the bus numbers to match.
>
> [snip]
>> diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci- 
>> bridge.h
>> index 2c2abda..70aab66 100644
>> --- a/include/asm-ppc/pci-bridge.h
>> +++ b/include/asm-ppc/pci-bridge.h
>> @@ -48,6 +48,7 @@ struct pci_controller {
>>  	int first_busno;
>>  	int last_busno;
>>  	int self_busno;
>> +	/* bus_offset is only used by ARCH=ppc */
>>  	int bus_offset;
>>
>>  	void __iomem *io_base_virt;
>
> Might be a good time to copy asm-ppc/pci-bridge.h to
> asm-powerpc/pci-bridge-32.h, yeah?

Yeah I'll look at something towards that, seeing as its one of the  
few headers we are including directly.

- k