[PATCH] Use resource_size_t for serial port IO addresses

[Josh Boyer <jwboyer@linux.vnet.ibm.com>]

This is a resend of a patch David sent out on May 7.  Without it, the
PowerPC 44x port in 2.6.22 and on is broken.  I've rebased it off of
Linus' current tree.  Please consider pushing this soon.

josh


At present, various parts of the serial code use unsigned long to
define resource addresses.  This is a problem, because some 32-bit
platforms have physical addresses larger than 32-bits, and have mmio
serial uarts located above the 4GB point.

This patch changes the type of mapbase in both struct uart_port and
struct plat_serial8250_port to resource_size_t, which can be
configured to be 64 bits on such platforms.  The mapbase in
serial_struct can't safely be changed, because that structure is user
visible.

Signed-off-by: David Gibson <dwg@au1.ibm.com>

---
 drivers/serial/8250.c        |    5 +++--
 drivers/serial/8250_early.c  |   16 +++++++++-------
 drivers/serial/serial_core.c |    9 +++++----
 include/linux/serial_8250.h  |    2 +-
 include/linux/serial_core.h  |    2 +-
 5 files changed, 19 insertions(+), 15 deletions(-)

--- linux-2.6.orig/include/linux/serial_core.h
+++ linux-2.6/include/linux/serial_core.h
@@ -284,7 +284,7 @@ struct uart_port {
 	const struct uart_ops	*ops;
 	unsigned int		custom_divisor;
 	unsigned int		line;			/* port index */
-	unsigned long		mapbase;		/* for ioremap */
+	resource_size_t		mapbase;		/* for ioremap */
 	struct device		*dev;			/* parent device */
 	unsigned char		hub6;			/* this should be in the 8250 driver */
 	unsigned char		unused[3];
--- linux-2.6.orig/drivers/serial/serial_core.c
+++ linux-2.6/drivers/serial/serial_core.c
@@ -626,7 +626,7 @@ static int uart_get_info(struct uart_sta
 	tmp.hub6	    = port->hub6;
 	tmp.io_type         = port->iotype;
 	tmp.iomem_reg_shift = port->regshift;
-	tmp.iomem_base      = (void *)port->mapbase;
+	tmp.iomem_base      = (void *)(unsigned long)port->mapbase;
 
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
@@ -1666,10 +1666,11 @@ static int uart_line_info(char *buf, str
 		return 0;
 
 	mmio = port->iotype >= UPIO_MEM;
-	ret = sprintf(buf, "%d: uart:%s %s%08lX irq:%d",
+	ret = sprintf(buf, "%d: uart:%s %s%08llX irq:%d",
 			port->line, uart_type(port),
 			mmio ? "mmio:0x" : "port:",
-			mmio ? port->mapbase : (unsigned long) port->iobase,
+			mmio ? (unsigned long long)port->mapbase
+		             : (unsigned long long) port->iobase,
 			port->irq);
 
 	if (port->type == PORT_UNKNOWN) {
@@ -2063,7 +2064,7 @@ uart_report_port(struct uart_driver *drv
 	case UPIO_TSI:
 	case UPIO_DWAPB:
 		snprintf(address, sizeof(address),
-			 "MMIO 0x%lx", port->mapbase);
+			 "MMIO 0x%llx", (unsigned long long)port->mapbase);
 		break;
 	default:
 		strlcpy(address, "*unknown*", sizeof(address));
--- linux-2.6.orig/drivers/serial/8250_early.c
+++ linux-2.6/drivers/serial/8250_early.c
@@ -145,8 +145,9 @@ static int __init parse_options(struct e
 		port->mapbase = simple_strtoul(options + 5, &options, 0);
 		port->membase = ioremap(port->mapbase, mapsize);
 		if (!port->membase) {
-			printk(KERN_ERR "%s: Couldn't ioremap 0x%lx\n",
-				__FUNCTION__, port->mapbase);
+			printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
+				__FUNCTION__,
+			       (unsigned long long)port->mapbase);
 			return -ENOMEM;
 		}
 		mmio = 1;
@@ -168,9 +169,10 @@ static int __init parse_options(struct e
 			device->baud);
 	}
 
-	printk(KERN_INFO "Early serial console at %s 0x%lx (options '%s')\n",
+	printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n",
 		mmio ? "MMIO" : "I/O port",
-		mmio ? port->mapbase : (unsigned long) port->iobase,
+		mmio ? (unsigned long long) port->mapbase
+	             : (unsigned long long) port->iobase,
 		device->options);
 	return 0;
 }
@@ -236,10 +238,10 @@ static int __init early_uart_console_swi
 	mmio = (port->iotype == UPIO_MEM);
 	line = serial8250_start_console(port, device->options);
 	if (line < 0)
-		printk("No ttyS device at %s 0x%lx for console\n",
+		printk("No ttyS device at %s 0x%llx for console\n",
 			mmio ? "MMIO" : "I/O port",
-			mmio ? port->mapbase :
-			    (unsigned long) port->iobase);
+			mmio ? (unsigned long long) port->mapbase
+		             : (unsigned long long) port->iobase);
 
 	unregister_console(&early_uart_console);
 	if (mmio)
--- linux-2.6.orig/include/linux/serial_8250.h
+++ linux-2.6/include/linux/serial_8250.h
@@ -20,7 +20,7 @@
 struct plat_serial8250_port {
 	unsigned long	iobase;		/* io base address */
 	void __iomem	*membase;	/* ioremap cookie or NULL */
-	unsigned long	mapbase;	/* resource base */
+	resource_size_t	mapbase;	/* resource base */
 	unsigned int	irq;		/* interrupt number */
 	unsigned int	uartclk;	/* UART clock rate */
 	unsigned char	regshift;	/* register shift */
--- linux-2.6.orig/drivers/serial/8250.c
+++ linux-2.6/drivers/serial/8250.c
@@ -2664,8 +2664,9 @@ static int __devinit serial8250_probe(st
 		ret = serial8250_register_port(&port);
 		if (ret < 0) {
 			dev_err(&dev->dev, "unable to register port at index %d "
-				"(IO%lx MEM%lx IRQ%d): %d\n", i,
-				p->iobase, p->mapbase, p->irq, ret);
+				"(IO%lx MEM%llx IRQ%d): %d\n", i,
+				p->iobase, (unsigned long long)p->mapbase,
+				p->irq, ret);
 		}
 	}
 	return 0;