From: Kumar Gala <galak@kernel.crashing.org>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
linuxppc-dev@ozlabs.org
Subject: [PATCH 12/25] [POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS
Date: Mon, 23 Jul 2007 15:49:59 -0500 [thread overview]
Message-ID: <1185223830411-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <11852238283648-git-send-email-galak@kernel.crashing.org>
The newer Arcadia boards for CDS have an FPGA that shows up on PCI
however isn't a real PCI device. Add a quirk to just ignore the
FPGA.
This is based on the following patch from Andy & York:
http://ozlabs.org/pipermail/linuxppc-dev/2007-February/032042.html
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/platforms/85xx/mpc85xx_cds.c | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 9b559eb..71200bd 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -108,6 +108,16 @@ static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev)
}
}
+static void __devinit skip_fake_bridge(struct pci_dev *dev)
+{
+ /* Make it an error to skip the fake bridge
+ * in pci_setup_device() in probe.c */
+ dev->hdr_type = 0x7f;
+}
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x3fff, skip_fake_bridge);
+DECLARE_PCI_FIXUP_EARLY(0x3fff, 0x1957, skip_fake_bridge);
+DECLARE_PCI_FIXUP_EARLY(0xff3f, 0x5719, skip_fake_bridge);
+
#ifdef CONFIG_PPC_I8259
#warning The i8259 PIC support is currently broken
static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
--
1.5.2.2
next prev parent reply other threads:[~2007-07-23 20:50 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-23 20:49 [PATCH 00/25] Freescale PCI/PCIe support/fixup/cleanup Kumar Gala
2007-07-23 20:49 ` [PATCH 01/25] [POWERPC] Create common fsl pci/e files based on 86xx platforms Kumar Gala
2007-07-23 20:49 ` [PATCH 02/25] [POWERPC] Rewrite Freescale PCI/PCIe support for 8{3, 5, 6}xx Kumar Gala
2007-07-23 20:49 ` [PATCH 03/25] [POWERPC] Add the ability to find PCI capabilities early on Kumar Gala
2007-07-23 20:49 ` [PATCH 04/25] [POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no link Kumar Gala
2007-07-23 20:49 ` [PATCH 05/25] [POWERPC] FSL: Cleanup how we detect if we are a PCIe controller Kumar Gala
2007-07-23 20:49 ` [PATCH 06/25] [POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node Kumar Gala
2007-07-23 20:49 ` [PATCH 07/25] [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree Kumar Gala
2007-07-23 20:49 ` [PATCH 08/25] [POWERPC] Use Freescale pci/pcie common code for 85xx boards Kumar Gala
2007-07-23 20:49 ` [PATCH 09/25] [POWERPC] Add basic PCI node for mpc8568mds board Kumar Gala
2007-07-23 20:49 ` [PATCH 10/25] [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected Kumar Gala
2007-07-23 20:49 ` [PATCH 11/25] [POWERPC] 85xx: Added 8568 PCIe support Kumar Gala
2007-07-23 20:49 ` Kumar Gala [this message]
2007-07-23 20:50 ` [PATCH 13/25] [POWERPC] Removed setup_indirect_pci_nomap Kumar Gala
2007-07-23 20:50 ` [PATCH 14/25] [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime Kumar Gala
2007-07-23 20:50 ` [PATCH 15/25] [POWERPC] Add basic PCI/PCI Express support for 8544DS board Kumar Gala
2007-07-23 20:50 ` [PATCH 16/25] [POWERPC] Provide ability to setup P2P bridge registers from struct resource Kumar Gala
2007-07-23 20:50 ` [PATCH 17/25] [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB Kumar Gala
2007-07-23 20:50 ` [PATCH 18/25] [POWERPC] FSL: Add support for PCI-X controllers Kumar Gala
2007-07-23 20:50 ` [PATCH 19/25] [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line Kumar Gala
2007-07-23 20:50 ` [PATCH 20/25] [POWERPC] 85xxCDS: Make sure restart resets the PCI bus Kumar Gala
2007-07-23 20:50 ` [PATCH 21/25] [POWERPC] 85xxCDS: Delay 8259 cascade hookup Kumar Gala
2007-07-23 20:50 ` [PATCH 22/25] [POWERPC] 85xxCDS: Misc 8548 PCI Corrections Kumar Gala
2007-07-23 20:50 ` [PATCH 23/25] [POWERPC] 85xxCDS: MPC8548 DTS cleanup Kumar Gala
2007-07-23 20:50 ` [PATCH 24/25] [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs Kumar Gala
2007-07-23 20:50 ` [PATCH 25/25] [POWERPC] 85xx: Added needed MPC85xx PCI " Kumar Gala
2007-07-23 21:30 ` [PATCH 23/25] [POWERPC] 85xxCDS: MPC8548 DTS cleanup Scott Wood
2007-07-24 11:52 ` [PATCH 21/25] [POWERPC] 85xxCDS: Delay 8259 cascade hookup Paul Mackerras
2007-07-24 15:34 ` Kumar Gala
2007-07-24 1:48 ` [PATCH 19/25] [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line Benjamin Herrenschmidt
2007-07-24 2:47 ` Kumar Gala
2007-07-24 3:41 ` Kumar Gala
2007-07-24 1:45 ` [PATCH 16/25] [POWERPC] Provide ability to setup P2P bridge registers from struct resource Benjamin Herrenschmidt
2007-07-24 1:43 ` [PATCH 14/25] [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime Benjamin Herrenschmidt
2007-07-24 2:30 ` Kumar Gala
2007-07-24 1:40 ` [PATCH 13/25] [POWERPC] Removed setup_indirect_pci_nomap Benjamin Herrenschmidt
2007-07-24 1:39 ` [PATCH 04/25] [POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no link Benjamin Herrenschmidt
2007-07-24 2:28 ` Kumar Gala
2007-07-24 1:37 ` [PATCH 03/25] [POWERPC] Add the ability to find PCI capabilities early on Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1185223830411-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).