linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH 16/25] [POWERPC] Provide ability to setup P2P bridge registers from struct resource
Date: Tue, 24 Jul 2007 11:45:39 +1000	[thread overview]
Message-ID: <1185241539.5439.192.camel@localhost.localdomain> (raw)
In-Reply-To: <11852238362041-git-send-email-galak@kernel.crashing.org>

On Mon, 2007-07-23 at 15:50 -0500, Kumar Gala wrote:
> We need the ability to set P2P bridge registers to properly setup the virtual
> P2P bridges that exist in PCIe controllers for some of the embedded setups.
> 
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

> ---
>  arch/powerpc/kernel/pci_32.c     |   18 ++++++++++++------
>  include/asm-powerpc/pci-bridge.h |    2 ++
>  2 files changed, 14 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
> index bfcfa14..721a694 100644
> --- a/arch/powerpc/kernel/pci_32.c
> +++ b/arch/powerpc/kernel/pci_32.c
> @@ -415,15 +415,13 @@ probe_resource(struct pci_bus *parent, struct resource *pr,
>  	return 0;
>  }
>  
> -static void __init
> -update_bridge_base(struct pci_bus *bus, int i)
> +void __init
> +update_bridge_resource(struct pci_dev *dev, struct resource *res)
>  {
> -	struct resource *res = bus->resource[i];
>  	u8 io_base_lo, io_limit_lo;
>  	u16 mem_base, mem_limit;
>  	u16 cmd;
>  	unsigned long start, end, off;
> -	struct pci_dev *dev = bus->self;
>  	struct pci_controller *hose = dev->sysdata;
>  
>  	if (!hose) {
> @@ -467,12 +465,20 @@ update_bridge_base(struct pci_bus *bus, int i)
>  		pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit);
>  
>  	} else {
> -		DBG(KERN_ERR "PCI: ugh, bridge %s res %d has flags=%lx\n",
> -		    pci_name(dev), i, res->flags);
> +		DBG(KERN_ERR "PCI: ugh, bridge %s res has flags=%lx\n",
> +		    pci_name(dev), res->flags);
>  	}
>  	pci_write_config_word(dev, PCI_COMMAND, cmd);
>  }
>  
> +static void __init
> +update_bridge_base(struct pci_bus *bus, int i)
> +{
> +	struct resource *res = bus->resource[i];
> +	struct pci_dev *dev = bus->self;
> +	update_bridge_resource(dev, res);
> +}
> +
>  static inline void alloc_resource(struct pci_dev *dev, int idx)
>  {
>  	struct resource *pr, *r = &dev->resource[idx];
> diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
> index 435bfe8..b7d2ea4 100644
> --- a/include/asm-powerpc/pci-bridge.h
> +++ b/include/asm-powerpc/pci-bridge.h
> @@ -93,6 +93,8 @@ extern int early_find_capability(struct pci_controller *hose, int bus,
>  extern void setup_indirect_pci(struct pci_controller* hose,
>  			       u32 cfg_addr, u32 cfg_data, u32 flags);
>  extern void setup_grackle(struct pci_controller *hose);
> +extern void __init update_bridge_resource(struct pci_dev *dev,
> +					  struct resource *res);
>  
>  #else
>  

  parent reply	other threads:[~2007-07-24  1:45 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-07-23 20:49 [PATCH 00/25] Freescale PCI/PCIe support/fixup/cleanup Kumar Gala
2007-07-23 20:49 ` [PATCH 01/25] [POWERPC] Create common fsl pci/e files based on 86xx platforms Kumar Gala
2007-07-23 20:49   ` [PATCH 02/25] [POWERPC] Rewrite Freescale PCI/PCIe support for 8{3, 5, 6}xx Kumar Gala
2007-07-23 20:49     ` [PATCH 03/25] [POWERPC] Add the ability to find PCI capabilities early on Kumar Gala
2007-07-23 20:49       ` [PATCH 04/25] [POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no link Kumar Gala
2007-07-23 20:49         ` [PATCH 05/25] [POWERPC] FSL: Cleanup how we detect if we are a PCIe controller Kumar Gala
2007-07-23 20:49           ` [PATCH 06/25] [POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node Kumar Gala
2007-07-23 20:49             ` [PATCH 07/25] [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree Kumar Gala
2007-07-23 20:49               ` [PATCH 08/25] [POWERPC] Use Freescale pci/pcie common code for 85xx boards Kumar Gala
2007-07-23 20:49                 ` [PATCH 09/25] [POWERPC] Add basic PCI node for mpc8568mds board Kumar Gala
2007-07-23 20:49                   ` [PATCH 10/25] [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected Kumar Gala
2007-07-23 20:49                     ` [PATCH 11/25] [POWERPC] 85xx: Added 8568 PCIe support Kumar Gala
2007-07-23 20:49                       ` [PATCH 12/25] [POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS Kumar Gala
2007-07-23 20:50                         ` [PATCH 13/25] [POWERPC] Removed setup_indirect_pci_nomap Kumar Gala
2007-07-23 20:50                           ` [PATCH 14/25] [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime Kumar Gala
2007-07-23 20:50                             ` [PATCH 15/25] [POWERPC] Add basic PCI/PCI Express support for 8544DS board Kumar Gala
2007-07-23 20:50                               ` [PATCH 16/25] [POWERPC] Provide ability to setup P2P bridge registers from struct resource Kumar Gala
2007-07-23 20:50                                 ` [PATCH 17/25] [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB Kumar Gala
2007-07-23 20:50                                   ` [PATCH 18/25] [POWERPC] FSL: Add support for PCI-X controllers Kumar Gala
2007-07-23 20:50                                     ` [PATCH 19/25] [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line Kumar Gala
2007-07-23 20:50                                       ` [PATCH 20/25] [POWERPC] 85xxCDS: Make sure restart resets the PCI bus Kumar Gala
2007-07-23 20:50                                         ` [PATCH 21/25] [POWERPC] 85xxCDS: Delay 8259 cascade hookup Kumar Gala
2007-07-23 20:50                                           ` [PATCH 22/25] [POWERPC] 85xxCDS: Misc 8548 PCI Corrections Kumar Gala
2007-07-23 20:50                                             ` [PATCH 23/25] [POWERPC] 85xxCDS: MPC8548 DTS cleanup Kumar Gala
2007-07-23 20:50                                               ` [PATCH 24/25] [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs Kumar Gala
2007-07-23 20:50                                                 ` [PATCH 25/25] [POWERPC] 85xx: Added needed MPC85xx PCI " Kumar Gala
2007-07-23 21:30                                               ` [PATCH 23/25] [POWERPC] 85xxCDS: MPC8548 DTS cleanup Scott Wood
2007-07-24 11:52                                           ` [PATCH 21/25] [POWERPC] 85xxCDS: Delay 8259 cascade hookup Paul Mackerras
2007-07-24 15:34                                             ` Kumar Gala
2007-07-24  1:48                                       ` [PATCH 19/25] [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line Benjamin Herrenschmidt
2007-07-24  2:47                                         ` Kumar Gala
2007-07-24  3:41                                           ` Kumar Gala
2007-07-24  1:45                                 ` Benjamin Herrenschmidt [this message]
2007-07-24  1:43                             ` [PATCH 14/25] [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime Benjamin Herrenschmidt
2007-07-24  2:30                               ` Kumar Gala
2007-07-24  1:40                           ` [PATCH 13/25] [POWERPC] Removed setup_indirect_pci_nomap Benjamin Herrenschmidt
2007-07-24  1:39         ` [PATCH 04/25] [POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no link Benjamin Herrenschmidt
2007-07-24  2:28           ` Kumar Gala
2007-07-24  1:37       ` [PATCH 03/25] [POWERPC] Add the ability to find PCI capabilities early on Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1185241539.5439.192.camel@localhost.localdomain \
    --to=benh@kernel.crashing.org \
    --cc=galak@kernel.crashing.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).