[PATCH 0/5 v3] Porting RapidIO driver from ppc to powerpc architecture and adding memory mapped RapidIO driver.

[PATCH 0/5 v3] Porting RapidIO driver from ppc to powerpc architecture and adding memory mapped RapidIO driver.

[Zhang Wei]

These patches are the version 3 patches for RapidIO with dts update and some minor fixups.

These patches are used for supporting RapidIO controllers of Freescale. I ported them from ppc architecture to powerpc architecture and added some new features, such as memory mapped driver.

[PATCH 1/5] Add the explanation and sample of RapidIO DTS OF-node to the document of booting-without-of.txt file.
[PATCH 2/5] Add RapidIO OF-node to MPC8641HPCN board dts file.
[PATCH 3/5] Add the platform device support with RapidIO to MPC8641HPCN platform.
[PATCH 4/5] Add RapidIO support to powerpc architecture.
[PATCH 5/5] Add the memory management driver to RapidIO.

Please see below descriptions of these patches:
1. Add the RapidIO driver of-device support.
2. Add the RapidIO driver support to MPC8641HPCN board.
3. Port the RapidIO from ppc to powerpc architecture.
4. Add Memory mapped RapidIO driver.
5. Add the support to multi master ports.
6. Add a simple bitmap RapidIO space allocator driver.
7. Change the RapidIO system size of menuconfig to automatically detection.

Thanks!

Best Regards,
Zhang Wei

[PATCH 1/5 v3] Add the explanation and a sample of RapidIO OF node to the document of booting-without-of.txt file.

[Zhang Wei]

Add the explanation and a sample of RapidIO OF node to the document of booting-without-of.txt file.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
 Documentation/powerpc/booting-without-of.txt |   37 ++++++++++++++++++++++++++
 1 files changed, 37 insertions(+), 0 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 76733a3..d89b805 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1824,6 +1824,43 @@ platforms are moved over to use the flattened-device-tree model.
 		fsl,has-rstcr;
 	};
 
+   l) RapidIO
+
+   RapidIO is a definition of a system interconnect. This node add
+   the support for RapidIO processor in kernel. The node name is
+   suggested to be 'rapidio'.
+
+   Required properties:
+
+    - compatible : Using "fsl,rapidio-delta" for Freescale PowerPC
+      RapidIO controller.
+    - #address-cells : Address representation for "rapidio" devices.
+      This field represents the number of cells needed to represent
+      the RapidIO address of the registers.
+      See 1) above for more details on defining #address-cells.
+    - reg : Offset and length of the register set for the device
+    - ranges : Should be defined as specified in 1) to describe the
+      translation of addresses for memory mapped RapidIO memory
+      space.
+    - interrupts : binding interrupts for this device node,
+      please follow below orders:
+      <err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
+      msg2_tx_irq msg2_rx_irq ... msgN_tx_irq msgN_rx_irq>.
+
+  Example:
+
+	rapidio@c0000 {
+		compatible = "fsl,rapidio-delta";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <c0000 20000>;
+		ranges = <0 0 c0000000 20000000>;
+		interrupt-parent = <&mpic>;
+		/* err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
+						      msg2_tx_irq msg2_rx_irq */
+		interrupts = <30 2 31 2 32 2 35 2 36 2 37 2 38 2>;
+	};
+
    More devices will be defined as this spec matures.
 
 VII - Specifying interrupt information for devices
-- 
1.5.1

[PATCH 2/5 v3] Add RapidIO OF-node to the MPC8641HPCN board dts file.

[Zhang Wei]

Add RapidIO OF-node to the MPC8641HPCN board dts file.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
 arch/powerpc/boot/dts/mpc8641_hpcn.dts |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 5d82709..080ba8a 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -422,6 +422,19 @@
 				>;
 		};
 
+		rapidio@c0000 {
+			compatible = "fsl,rapidio-delta";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			reg = <c0000 20000>;
+			ranges = <0 0 c0000000 20000000>;
+			interrupt-parent = <&mpic>;
+			/* err_irq bell_outb_irq bell_inb_irq
+						msg1_tx_irq msg1_rx_irq
+						msg2_tx_irq msg2_rx_irq */
+			interrupts = <30 2 31 2 32 2 35 2 36 2 37 2 38 2>;
+		};
+
 		mpic: pic@40000 {
 			clock-frequency = <0>;
 			interrupt-controller;
-- 
1.5.1

[PATCH 3/5 v3] Add the platform device support with RapidIO to MPC8641HPCN platform.

[Zhang Wei]

Add the platform device support with RapidIO to MPC8641HPCN platform.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index e9eaa07..7693adc 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -28,6 +28,8 @@
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
 #include <asm/i8259.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
 
 #include <asm/mpic.h>
 
@@ -444,3 +446,17 @@ define_machine(mpc86xx_hpcn) {
 	.progress		= udbg_progress,
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 };
+
+
+static struct of_device_id mpc86xx_of_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "fsl,rapidio-delta", },
+	{},
+};
+
+static __init int mpc86xx_of_device_init(void)
+{
+	return of_platform_bus_probe(NULL, mpc86xx_of_ids, NULL);
+}
+
+device_initcall(mpc86xx_of_device_init);
-- 
1.5.1

[PATCH 4/5 v3] Add RapidIO support to powerpc architecture.

[Zhang Wei]

This patch adds the RapidIO support to the powerpc architecture.
Some files are moved from ppc. OF-tree and OF-device supports are added.
New silicons such as MPC8548, MPC8641 with serial RapidIO controller are
all supported.
Memory driver hardware operations are added.
Global mport variables are changed to master port private variables.
Multi master ports are supported.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
 arch/powerpc/Kconfig          |    8 +
 arch/powerpc/kernel/Makefile  |    1 +
 arch/powerpc/kernel/rio.c     |   64 ++
 arch/powerpc/sysdev/Makefile  |    1 +
 arch/powerpc/sysdev/fsl_rio.c | 1455 +++++++++++++++++++++++++++++++++++++++++
 arch/powerpc/sysdev/fsl_rio.h |   20 +
 6 files changed, 1549 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/kernel/rio.c
 create mode 100644 arch/powerpc/sysdev/fsl_rio.c
 create mode 100644 arch/powerpc/sysdev/fsl_rio.h

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 00099ef..45f32f1 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -492,6 +492,14 @@ source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
 
+config RAPIDIO
+	bool "RapidIO support" if MPC8540 || MPC8560 || MPC8641 || MPC8548
+	help
+	  If you say Y here, the kernel will include drivers and
+	  infrastructure code to support RapidIO interconnect devices.
+
+source "drivers/rapidio/Kconfig"
+
 source "drivers/pci/hotplug/Kconfig"
 
 endmenu
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 42c42ec..02d4100 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -70,6 +70,7 @@ pci64-$(CONFIG_PPC64)		+= pci_64.o pci_dn.o isa-bridge.o
 pci32-$(CONFIG_PPC32)		:= pci_32.o
 obj-$(CONFIG_PCI)		+= $(pci64-y) $(pci32-y) pci-common.o
 obj-$(CONFIG_PCI_MSI)		+= msi.o
+obj-$(CONFIG_RAPIDIO)		+= rio.o
 kexec-$(CONFIG_PPC64)		:= machine_kexec_64.o
 kexec-$(CONFIG_PPC32)		:= machine_kexec_32.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o $(kexec-y)
diff --git a/arch/powerpc/kernel/rio.c b/arch/powerpc/kernel/rio.c
new file mode 100644
index 0000000..8d41e93
--- /dev/null
+++ b/arch/powerpc/kernel/rio.c
@@ -0,0 +1,64 @@
+/*
+ * RapidIO PowerPC support
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Zhang Wei <wei.zhang@freescale.com>, Jun 2007
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * New RapidIO peer-to-peer network initialize with of-device supoort.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/rio.h>
+
+#include <asm/rio.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+
+#include <../sysdev/fsl_rio.h>
+
+
+/* The probe function for RapidIO peer-to-peer network.
+ */
+static int __devinit of_rio_rpn_probe(struct of_device *dev,
+				     const struct of_device_id *match)
+{
+	int rc;
+	printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n",
+			dev->node->full_name);
+
+	rc = fsl_rio_setup(dev);
+	if (rc)
+		goto out;
+
+	/* Enumerate all registered ports */
+	rc = rio_init_mports();
+out:
+	return rc;
+};
+
+static struct of_device_id of_rio_rpn_ids[] = {
+	{
+		.compatible = "fsl,rapidio-delta",
+	},
+	{},
+};
+
+static struct of_platform_driver of_rio_rpn_driver = {
+	.name = "of-rio",
+	.match_table = of_rio_rpn_ids,
+	.probe = of_rio_rpn_probe,
+};
+
+static __init int of_rio_rpn_init(void)
+{
+	return of_register_platform_driver(&of_rio_rpn_driver);
+}
+
+subsys_initcall(of_rio_rpn_init);
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 08ce31e..0dd6b6a 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_PPC_PMI)		+= pmi.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
+obj-$(CONFIG_RAPIDIO)		+= fsl_rio.o
 obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
new file mode 100644
index 0000000..1608138
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -0,0 +1,1455 @@
+/*
+ * PowerPC RapidIO support
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Zhang Wei <wei.zhang@freescale.com>, Jun 2007
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Changelog:
+ * Jun 2007 Zhang Wei <wei.zhang@freescale.com>
+ * - This file is moved from arch/ppc/ppc85xx_rio.c. And the OF-tree support
+ *   is added. New silicons such as MPC8548, MPC8641 are all supported.
+ *   Memory driver hardware operations are added.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+#include "fsl_soc.h"
+
+/* RapidIO definition irq, which read from OF-tree */
+#define IRQ_RIO_BELL(m)		(((struct rio_priv *)(m->priv))->bellirq)
+#define IRQ_RIO_TX(m)		(((struct rio_priv *)(m->priv))->txirq)
+#define IRQ_RIO_RX(m)		(((struct rio_priv *)(m->priv))->rxirq)
+
+#define ERR(fmt, arg...) \
+	printk(KERN_ERR "RIO %s: " fmt, __FUNCTION__, ## arg)
+#define INFO(fmt...) printk(KERN_INFO "RIO: " fmt)
+#define IS_64BIT_RES ((sizeof(resource_size_t) == 8) ? 1 : 0)
+
+#define RIO_ATMU_REGS_OFFSET	0x10c00
+#define RIO_P_MSG_REGS_OFFSET	0x11000
+#define RIO_S_MSG_REGS_OFFSET	0x13000
+#define RIO_ESCSR		0x158
+#define RIO_CCSR		0x15c
+#define RIO_ISR_AACR		0x10120
+#define RIO_ISR_AACR_AA		0x1	/* Accept All ID */
+#define RIO_MAINT_WIN_SIZE	0x400000
+#define RIO_DBELL_WIN_SIZE	0x1000
+#define RIO_MAX_INB_ATMU	4
+#define RIO_MAX_OUTB_ATMU	8
+#define RIO_INB_ATMU_REGS_OFFSET	0x10de0
+#define RIO_ATMU_EN_MASK	0x80000000
+
+#define RIO_NREAD		0x4
+#define RIO_NWRITE		0x4
+#define RIO_NWRITE_R		0x5
+#define RIO_NREAD_R		0x5
+
+#define RIO_MSG_OMR_MUI		0x00000002
+#define RIO_MSG_OSR_TE		0x00000080
+#define RIO_MSG_OSR_QOI		0x00000020
+#define RIO_MSG_OSR_QFI		0x00000010
+#define RIO_MSG_OSR_MUB		0x00000004
+#define RIO_MSG_OSR_EOMI	0x00000002
+#define RIO_MSG_OSR_QEI		0x00000001
+
+#define RIO_MSG_IMR_MI		0x00000002
+#define RIO_MSG_ISR_TE		0x00000080
+#define RIO_MSG_ISR_QFI		0x00000010
+#define RIO_MSG_ISR_DIQI	0x00000001
+
+#define RIO_MSG_DESC_SIZE	32
+#define RIO_MSG_BUFFER_SIZE	4096
+#define RIO_MIN_TX_RING_SIZE	2
+#define RIO_MAX_TX_RING_SIZE	2048
+#define RIO_MIN_RX_RING_SIZE	2
+#define RIO_MAX_RX_RING_SIZE	2048
+
+#define DOORBELL_DMR_DI		0x00000002
+#define DOORBELL_DSR_TE		0x00000080
+#define DOORBELL_DSR_QFI	0x00000010
+#define DOORBELL_DSR_DIQI	0x00000001
+#define DOORBELL_TID_OFFSET	0x02
+#define DOORBELL_SID_OFFSET	0x04
+#define DOORBELL_INFO_OFFSET	0x06
+
+#define DOORBELL_MESSAGE_SIZE	0x08
+#define DBELL_SID(x)		(*(u16 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x)		(*(u16 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_INF(x)		(*(u16 *)(x + DOORBELL_INFO_OFFSET))
+
+struct rio_atmu_regs {
+	u32 rowtar;
+	u32 rowtear;
+	u32 rowbar;
+	u32 pad2;
+	u32 rowar;
+	u32 pad3[3];
+};
+
+struct rio_inb_atmu_regs {
+	u32 riwtar;
+	u32 pad1;
+	u32 riwbar;
+	u32 pad2;
+	u32 riwar;
+	u32 pad3[3];
+};
+
+struct rio_msg_regs {
+	u32 omr;
+	u32 osr;
+	u32 pad1;
+	u32 odqdpar;
+	u32 pad2;
+	u32 osar;
+	u32 odpr;
+	u32 odatr;
+	u32 odcr;
+	u32 pad3;
+	u32 odqepar;
+	u32 pad4[13];
+	u32 imr;
+	u32 isr;
+	u32 pad5;
+	u32 ifqdpar;
+	u32 pad6;
+	u32 ifqepar;
+	u32 pad7[226];
+	u32 odmr;
+	u32 odsr;
+	u32 res0[4];
+	u32 oddpr;
+	u32 oddatr;
+	u32 res1[3];
+	u32 odretcr;
+	u32 res2[12];
+	u32 dmr;
+	u32 dsr;
+	u32 pad8;
+	u32 dqdpar;
+	u32 pad9;
+	u32 dqepar;
+	u32 pad10[26];
+	u32 pwmr;
+	u32 pwsr;
+	u32 pad11;
+	u32 pwqbar;
+};
+
+struct rio_tx_desc {
+	u32 res1;
+	u32 saddr;
+	u32 dport;
+	u32 dattr;
+	u32 res2;
+	u32 res3;
+	u32 dwcnt;
+	u32 res4;
+};
+
+struct rio_dbell_ring {
+	void *virt;
+	dma_addr_t phys;
+};
+
+struct rio_msg_tx_ring {
+	void *virt;
+	dma_addr_t phys;
+	void *virt_buffer[RIO_MAX_TX_RING_SIZE];
+	dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
+	int tx_slot;
+	int size;
+	void *dev_id;
+};
+
+struct rio_msg_rx_ring {
+	void *virt;
+	dma_addr_t phys;
+	void *virt_buffer[RIO_MAX_RX_RING_SIZE];
+	int rx_slot;
+	int size;
+	void *dev_id;
+};
+
+struct rio_priv {
+	volatile void __iomem *regs_win;
+	volatile struct rio_atmu_regs __iomem *atmu_regs;
+	volatile struct rio_atmu_regs __iomem *maint_atmu_regs;
+	volatile struct rio_atmu_regs __iomem *dbell_atmu_regs;
+	volatile void __iomem *dbell_win;
+	volatile void __iomem *maint_win;
+	volatile struct rio_msg_regs __iomem *msg_regs;
+	struct rio_dbell_ring dbell_ring;
+	struct rio_msg_tx_ring msg_tx_ring;
+	struct rio_msg_rx_ring msg_rx_ring;
+	int bellirq;
+	int txirq;
+	int rxirq;
+};
+
+/**
+ * fsl_rio_doorbell_send - Send a PowerPC doorbell message
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell message
+ *
+ * Sends a PowerPC doorbell message. Returns %0 on success or
+ * %-EINVAL on failure.
+ */
+static int fsl_rio_doorbell_send(struct rio_mport *mport, int index, u16 destid, u16 data)
+{
+	struct rio_priv *priv = mport->priv;
+	pr_debug("fsl_doorbell_send: index %d destid 0x%04x data 0x%04x\n",
+			index, destid, data);
+
+	switch (mport->phy_type) {
+	case RIO_PHY_SERIAL:
+		/* In the later version silicons, such as MPC8548, MPC8641,
+		 * below operations is must be.
+		 */
+		out_be32(&priv->msg_regs->odmr, 0x00000000);
+		out_be32(&priv->msg_regs->odretcr, 0x00000004);
+		out_be32(&priv->msg_regs->oddpr, destid << 16);
+		out_be32(&priv->msg_regs->oddatr,data );
+		out_be32(&priv->msg_regs->odmr, 0x00000001);
+		break;
+	case RIO_PHY_PARALLEL:
+		out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
+		out_be16(priv->dbell_win, data);
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * fsl_local_config_read - Generate a PowerPC local config space read
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a PowerPC local configuration space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int fsl_local_config_read(struct rio_mport *mport, int index, u32 offset, int len, u32 * data)
+{
+	struct rio_priv *priv = mport->priv;
+	pr_debug("fsl_local_config_read: index %d offset 0x%08x\n", index,
+			offset);
+	*data = in_be32(priv->regs_win + offset);
+
+	return 0;
+}
+
+/**
+ * fsl_local_config_write - Generate a PowerPC local config space write
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a PowerPC local configuration space write. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int fsl_local_config_write(struct rio_mport *mport, int index, u32 offset, int len, u32 data)
+{
+	struct rio_priv *priv = mport->priv;
+	pr_debug("fsl_local_config_write: index %d offset 0x%08x data 0x%08x\n",
+			index, offset, data);
+	out_be32(priv->regs_win + offset, data);
+
+	return 0;
+}
+
+/**
+ * fsl_rio_config_read - Generate a PowerPC read maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a PowerPC read maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
+		u8 hopcount, u32 offset, int len, u32 * val)
+{
+	void *data;
+	struct rio_priv *priv = mport->priv;
+
+	pr_debug("fsl_rio_config_read: index %d destid %d hopcount %d "
+			"offset 0x%08x len %d\n",
+			index, destid, hopcount, offset, len);
+	out_be32(&priv->maint_atmu_regs->rowtar,
+		 ((destid & 0x3ff) << 22) | (hopcount << 12)
+		 | ((offset & ~0x3) >> 9));
+	out_be32(&priv->maint_atmu_regs->rowtear, (destid & 0xfc00) >> 10);
+
+	data = priv->maint_win + offset;
+	switch (len) {
+	case 1:
+		*val = in_8(data);
+		break;
+	case 2:
+		*val = in_be16(data);
+		break;
+	default:
+		*val = in_be32(data);
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * fsl_rio_config_write - Generate a PowerPC write maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates an PowerPC write maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
+		u8 hopcount, u32 offset, int len, u32 val)
+{
+	void *data;
+	struct rio_priv *priv = mport->priv;
+	pr_debug("fsl_rio_config_write: index %d destid %d hopcount %d"
+			"offset 0x%08x len %d val 0x%08x\n",
+			index, destid, hopcount, offset, len, val);
+	out_be32(&priv->maint_atmu_regs->rowtar,
+		 ((destid & 0x3ff) << 22) | (hopcount << 12)
+		 | ((offset & ~0x3) >> 9));
+	out_be32(&priv->maint_atmu_regs->rowtear, (destid & 0xfc00) >> 10);
+
+	data = priv->maint_win + offset;
+	switch (len) {
+	case 1:
+		out_8(data, val);
+		break;
+	case 2:
+		out_be16(data, val);
+		break;
+	default:
+		out_be32(data, val);
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * fsl_rio_map_inb_mem -- Mapping inbound memory region.
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the inbound mapping
+ * from rstart to lstart.
+ */
+static int fsl_rio_map_inb_mem(struct rio_mport *mport, resource_size_t lstart,
+		resource_size_t rstart,	resource_size_t size,
+		u32 flags)
+{
+	int i;
+	struct rio_priv *priv = mport->priv;
+	volatile struct rio_inb_atmu_regs __iomem *inbatmu =
+				(struct rio_inb_atmu_regs *)
+				(priv->regs_win + RIO_INB_ATMU_REGS_OFFSET) - 1;
+	int size_ffs;
+	resource_size_t align;
+
+	if (flags == 0)
+		flags = (RIO_NREAD_R << 4) | RIO_NWRITE_R;
+
+	align = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+	/* Align the size */
+	if ((lstart + size) > (_ALIGN_DOWN(lstart, align) + align)) {
+		size_ffs = __ffs(_ALIGN_DOWN(lstart + size - 1, align));
+		size = 1 << (size_ffs +	(((_ALIGN_DOWN(lstart, 1 << size_ffs) +
+				(1 << size_ffs)) < (lstart + size)) ? 1 : 0));
+	} else
+		size = align;
+
+	if ((lstart & (size - 1)) != (rstart & (size - 1))) {
+		ERR("The local address 0x%x can not be aligned to the same size"
+			" 0x%x with the RapidIO space address 0x%x!\n", lstart,
+			size, rstart);
+		return -EINVAL;
+	}
+
+	/* Search for free inbound ATMU */
+	for (i = 1;
+		(i <= RIO_MAX_INB_ATMU) && (inbatmu->riwar & RIO_ATMU_EN_MASK);
+		i++, inbatmu--)
+		;
+
+	if (i > RIO_MAX_INB_ATMU) {
+		ERR("No free inbound ATMU!\n");
+		return -EBUSY;
+	}
+	out_be32(&inbatmu->riwtar, ((IS_64BIT_RES ? (lstart >> 32)
+				& 0xf : 0) << 20) | ((lstart >> 12) & 0xfffff));
+	out_be32(&inbatmu->riwbar, ((IS_64BIT_RES ? (rstart >> 32)
+				& 0x3 : 0) << 20) | ((rstart >> 12) & 0xfffff));
+	out_be32(&inbatmu->riwar, 0x80000000 | (0xf << 20)
+				| ((flags & 0xff) << 12)
+				| (__ilog2(size) - 1));
+	return 0;
+}
+
+/**
+ * fsl_rio_map_outb_mem -- Mapping outbound memory region.
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @tid: The target RapidIO device id.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the outbound mapping
+ * from lstart to rstart.
+ */
+static int fsl_rio_map_outb_mem(struct rio_mport *mport, resource_size_t lstart,
+		resource_size_t rstart,	resource_size_t size,
+		u16 tid, u32 flags)
+{
+	int i;
+	struct rio_priv *priv = mport->priv;
+	volatile struct rio_atmu_regs __iomem *outbatmu =
+			(struct rio_atmu_regs *)
+			(priv->regs_win + RIO_ATMU_REGS_OFFSET) + 1;
+	int size_ffs;
+	resource_size_t align;
+
+	if (flags == 0)
+		flags = (RIO_NREAD << 4) | RIO_NWRITE_R;
+
+	align = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+	/* Align the size */
+	if ((lstart + size) > (_ALIGN_DOWN(lstart, align) + align)) {
+		size_ffs = __ffs(_ALIGN_DOWN(lstart + size - 1, align));
+		size = 1 << (size_ffs +	(((_ALIGN_DOWN(lstart, 1 << size_ffs) +
+				(1 << size_ffs)) < (lstart + size)) ? 1 : 0));
+	} else
+		size = align;
+
+	if ((lstart & (size - 1)) != (rstart & (size - 1))) {
+		ERR("The local address 0x%x can not be aligned to the same size"
+			" 0x%x with the RapidIO space address 0x%x!\n", lstart,
+			size, rstart);
+		return -EINVAL;
+	}
+
+	/* Search for free outbound ATMU */
+	for (i = 1;
+	      (i <= RIO_MAX_OUTB_ATMU) && (outbatmu->rowar & RIO_ATMU_EN_MASK);
+	      i++, outbatmu++)
+		;
+
+	if (i > RIO_MAX_OUTB_ATMU) {
+		ERR("No free outbound ATMU!\n");
+		return -EBUSY;
+	}
+	out_be32(&outbatmu->rowtar, ((tid & 0x3ff) << 22)
+			| ((IS_64BIT_RES ? (rstart >> 32) & 0x3 : 0) << 20)
+			| ((rstart >> 12) & 0xfffff));
+	if (mport->phy_type == RIO_PHY_SERIAL)
+		out_be32(&outbatmu->rowtear, tid >> 10);
+	out_be32(&outbatmu->rowbar, ((IS_64BIT_RES ?
+					(lstart >> 32) & 0xf : 0) << 20)
+					| ((lstart >> 12) & 0xfffff));
+	out_be32(&outbatmu->rowar, 0x80000000
+				| ((flags & 0xff) << 12)
+				| (__ilog2(size) - 1));
+	return 0;
+}
+
+/**
+ * fsl_rio_unmap_inb_mem -- Unmapping inbound memory region.
+ * @lstart: Local memory space start address.
+ */
+static void fsl_rio_unmap_inb_mem(struct rio_mport *mport, resource_size_t lstart)
+{
+	int i;
+	struct rio_priv *priv = mport->priv;
+	volatile struct rio_inb_atmu_regs __iomem *inbatmu = (struct rio_inb_atmu_regs *)
+			(priv->regs_win + RIO_INB_ATMU_REGS_OFFSET) - 1;
+
+	/* Search for inbound ATMU */
+	for (i = 1; i <= RIO_MAX_INB_ATMU ; i++, inbatmu--) {
+		u32 tar = ((IS_64BIT_RES ? (lstart >> 32) & 0xf : 0) << 20)
+			| ((lstart >> 12) & 0xfffff);
+		if (inbatmu->riwtar == tar) {
+			out_be32(&inbatmu->riwar, ~(RIO_ATMU_EN_MASK));
+			return;
+		}
+	}
+}
+
+/**
+ * fsl_rio_unmap_inb_mem -- Unmapping outbound memory region.
+ * @lstart: Local memory space start address.
+ */
+static void fsl_rio_unmap_outb_mem(struct rio_mport *mport, resource_size_t lstart)
+{
+	int i;
+	struct rio_priv *priv = mport->priv;
+	volatile struct rio_atmu_regs __iomem *outbatmu = (struct rio_atmu_regs *)
+			(priv->regs_win + RIO_ATMU_REGS_OFFSET) + 1;
+
+	/* Search for outbound ATMU */
+	for (i = 1; i <= RIO_MAX_OUTB_ATMU ; i++, outbatmu++) {
+		u32 bar = ((IS_64BIT_RES ? (lstart >> 32) & 0xf : 0) << 20)
+			| ((lstart >> 12) & 0xfffff);
+		if (outbatmu->rowbar == bar) {
+			out_be32(&outbatmu->rowar, ~(RIO_ATMU_EN_MASK));
+			return;
+		}
+	}
+}
+
+/**
+ * rio_hw_add_outb_message - Add message to the PowerPC outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ *
+ * Adds the @buffer message to the PowerPC outbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev,
+		int mbox, void *buffer, size_t len)
+{
+	struct rio_priv *priv = mport->priv;
+	struct rio_tx_desc *desc =
+	    (struct rio_tx_desc *)priv->msg_tx_ring.virt + priv->msg_tx_ring.tx_slot;
+	int ret = 0;
+
+	pr_debug("RIO: rio_hw_add_outb_message(): "
+			"destid 0x%04x mbox %d buffer %p len 0x%08x\n",
+			rdev->destid, mbox, buffer, len);
+
+	if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Copy and clear rest of buffer */
+	memcpy(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot], buffer, len);
+	if (len < (RIO_MAX_MSG_SIZE - 4))
+		memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
+				+ len, 0, RIO_MAX_MSG_SIZE - len);
+
+	switch(mport->phy_type) {
+	case RIO_PHY_SERIAL:
+		/* Set mbox field for message, and set destid */
+		desc->dport = (rdev->destid << 16) | ( mbox & 0x3);
+
+		/* Enable EOMI interrupt and priority */
+		desc->dattr = 0x28000000;
+
+		/* Set mbox field for message */
+		desc->dport = mbox & 0x3;
+		break;
+	case RIO_PHY_PARALLEL:
+		/* Enable EOMI interrupt, set priority, and set destid */
+		desc->dattr = 0x28000000 | (rdev->destid << 2);
+		break;
+	}
+
+	/* Set transfer size aligned to next power of 2 (in double words) */
+	desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
+
+	/* Set snooping and source buffer address */
+	desc->saddr = 0x00000004 | priv->msg_tx_ring.phys_buffer[priv->msg_tx_ring.tx_slot];
+
+	/* Increment enqueue pointer */
+	setbits32(&priv->msg_regs->omr, RIO_MSG_OMR_MUI);
+
+	/* Go to next descriptor */
+	if (++priv->msg_tx_ring.tx_slot == priv->msg_tx_ring.size)
+		priv->msg_tx_ring.tx_slot = 0;
+
+      out:
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
+
+/**
+ * fsl_rio_tx_handler - PowerPC outbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles outbound message interrupts. Executes a register outbound
+ * mailbox event handler and acks the interrupt occurence.
+ */
+static irqreturn_t fsl_rio_tx_handler(int irq, void *dev_instance)
+{
+	int osr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+	struct rio_priv *priv = port->priv;
+
+	osr = in_be32(&priv->msg_regs->osr);
+
+	if (unlikely(osr & RIO_MSG_OSR_TE)) {
+		pr_info("RIO: outbound message transmission error\n");
+		out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_TE);
+		goto out;
+	}
+
+	if (unlikely(osr & RIO_MSG_OSR_QOI)) {
+		pr_info("RIO: outbound message queue overflow\n");
+		out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_QOI);
+		goto out;
+	}
+
+	if (osr & RIO_MSG_OSR_EOMI) {
+		u32 dqp = in_be32(&priv->msg_regs->odqdpar);
+		int slot = (dqp - priv->msg_tx_ring.phys) >> 5;
+		port->outb_msg[0].mcback(port, priv->msg_tx_ring.dev_id, -1, slot);
+
+		/* Ack the end-of-message interrupt */
+		out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_EOMI);
+	}
+
+      out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_outb_mbox - Initialize PowerPC outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ *
+ * Initializes buffer ring, request the outbound message interrupt,
+ * and enables the outbound message unit. Returns %0 on success and
+ * %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+	int i, j, rc = 0;
+	struct rio_priv *priv = mport->priv;
+
+	if ((entries < RIO_MIN_TX_RING_SIZE) ||
+	    (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Initialize shadow copy ring */
+	priv->msg_tx_ring.dev_id = dev_id;
+	priv->msg_tx_ring.size = entries;
+
+	for (i = 0; i < priv->msg_tx_ring.size; i++) {
+		priv->msg_tx_ring.virt_buffer[i] =
+		     dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+					&priv->msg_tx_ring.phys_buffer[i],
+					GFP_KERNEL);
+		if (!priv->msg_tx_ring.virt_buffer[i]) {
+			rc = -ENOMEM;
+			for (j = 0; j < priv->msg_tx_ring.size; j++)
+				if (priv->msg_tx_ring.virt_buffer[j])
+					dma_free_coherent(NULL,
+							  RIO_MSG_BUFFER_SIZE,
+							  priv->msg_tx_ring.
+							  virt_buffer[j],
+							  priv->msg_tx_ring.
+							  phys_buffer[j]);
+			goto out;
+		}
+	}
+
+	/* Initialize outbound message descriptor ring */
+	priv->msg_tx_ring.virt = dma_alloc_coherent(NULL,
+						    priv->msg_tx_ring.size *
+						    RIO_MSG_DESC_SIZE,
+						    &priv->msg_tx_ring.phys,
+						    GFP_KERNEL);
+	if (!priv->msg_tx_ring.virt) {
+		rc = -ENOMEM;
+		goto out_dma;
+	}
+	priv->msg_tx_ring.tx_slot = 0;
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32(&priv->msg_regs->odqdpar, priv->msg_tx_ring.phys);
+	out_be32(&priv->msg_regs->odqepar, priv->msg_tx_ring.phys);
+
+	/* Configure for snooping */
+	out_be32(&priv->msg_regs->osar, 0x00000004);
+
+	/* Clear interrupt status */
+	out_be32(&priv->msg_regs->osr, 0x000000b3);
+
+	/* Hook up outbound message handler */
+	rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0, "msg_tx",
+			mport);
+	if (rc < 0)
+		goto out_irq;
+
+	/*
+	 * Configure outbound message unit
+	 *      Snooping
+	 *      Interrupts (all enabled, except QEIE)
+	 *      Chaining mode
+	 *      Disable
+	 */
+	out_be32(&priv->msg_regs->omr, 0x00100220);
+
+	/* Set number of entries */
+	setbits32(&priv->msg_regs->omr,
+		 ((get_bitmask_order(entries) - 2) << 12));
+
+	/* Now enable the unit */
+	setbits32(&priv->msg_regs->omr, 0x1);
+
+      out:
+	return rc;
+
+      out_irq:
+	dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+			  priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
+
+      out_dma:
+	for (i = 0; i < priv->msg_tx_ring.size; i++)
+		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+				  priv->msg_tx_ring.virt_buffer[i],
+				  priv->msg_tx_ring.phys_buffer[i]);
+
+	return rc;
+}
+
+/**
+ * rio_close_outb_mbox - Shut down PowerPC outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the outbound message unit, free all buffers, and
+ * frees the outbound message interrupt.
+ */
+void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+	struct rio_priv *priv = mport->priv;
+	/* Disable inbound message unit */
+	out_be32(&priv->msg_regs->omr, 0);
+
+	/* Free ring */
+	dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+			  priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
+
+	/* Free interrupt */
+	free_irq(IRQ_RIO_TX(mport), mport);
+}
+
+/**
+ * fsl_rio_rx_handler - PowerPC inbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles inbound message interrupts. Executes a registered inbound
+ * mailbox event handler and acks the interrupt occurence.
+ */
+static irqreturn_t fsl_rio_rx_handler(int irq, void *dev_instance)
+{
+	int isr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+	struct rio_priv *priv = port->priv;
+
+	isr = in_be32(&priv->msg_regs->isr);
+
+	if (unlikely(isr & RIO_MSG_ISR_TE)) {
+		pr_info("RIO: inbound message reception error\n");
+		out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_TE);
+		goto out;
+	}
+
+	/* XXX Need to check/dispatch until queue empty */
+	if (isr & RIO_MSG_ISR_DIQI) {
+		/*
+		 * We implement *only* mailbox 0, but can receive messages
+		 * for any mailbox/letter to that mailbox destination. So,
+		 * make the callback with an unknown/invalid mailbox number
+		 * argument.
+		 */
+		port->inb_msg[0].mcback(port, priv->msg_rx_ring.dev_id, -1, -1);
+
+		/* Ack the queueing interrupt */
+		out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_DIQI);
+	}
+
+      out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_inb_mbox - Initialize PowerPC inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ *
+ * Initializes buffer ring, request the inbound message interrupt,
+ * and enables the inbound message unit. Returns %0 on success
+ * and %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+	int i, rc = 0;
+	struct rio_priv *priv = mport->priv;
+
+	if ((entries < RIO_MIN_RX_RING_SIZE) ||
+	    (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Initialize client buffer ring */
+	priv->msg_rx_ring.dev_id = dev_id;
+	priv->msg_rx_ring.size = entries;
+	priv->msg_rx_ring.rx_slot = 0;
+	for (i = 0; i < priv->msg_rx_ring.size; i++)
+		priv->msg_rx_ring.virt_buffer[i] = NULL;
+
+	/* Initialize inbound message ring */
+	priv->msg_rx_ring.virt = dma_alloc_coherent(NULL,
+						    priv->msg_rx_ring.size *
+						    RIO_MAX_MSG_SIZE,
+						    &priv->msg_rx_ring.phys,
+						    GFP_KERNEL);
+	if (!priv->msg_rx_ring.virt) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32(&priv->msg_regs->ifqdpar, (u32) priv->msg_rx_ring.phys);
+	out_be32(&priv->msg_regs->ifqepar, (u32) priv->msg_rx_ring.phys);
+
+	/* Clear interrupt status */
+	out_be32(&priv->msg_regs->isr, 0x00000091);
+
+	/* Hook up inbound message handler */
+	rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
+			 "msg_rx", mport);
+	if (rc < 0) {
+		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+				  priv->msg_tx_ring.virt_buffer[i],
+				  priv->msg_tx_ring.phys_buffer[i]);
+		goto out;
+	}
+
+	/*
+	 * Configure inbound message unit:
+	 *      Snooping
+	 *      4KB max message size
+	 *      Unmask all interrupt sources
+	 *      Disable
+	 */
+	out_be32(&priv->msg_regs->imr, 0x001b0060);
+
+	/* Set number of queue entries */
+	setbits32(&priv->msg_regs->imr,
+			((get_bitmask_order(entries) - 2) << 12));
+
+	/* Now enable the unit */
+	setbits32(&priv->msg_regs->imr, 0x1);
+
+      out:
+	return rc;
+}
+
+/**
+ * rio_close_inb_mbox - Shut down PowerPC inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the inbound message unit, free all buffers, and
+ * frees the inbound message interrupt.
+ */
+void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+	struct rio_priv *priv = mport->priv;
+	/* Disable inbound message unit */
+	out_be32(&priv->msg_regs->imr, 0);
+
+	/* Free ring */
+	dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+			  priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
+
+	/* Free interrupt */
+	free_irq(IRQ_RIO_RX(mport), mport);
+}
+
+/**
+ * rio_hw_add_inb_buffer - Add buffer to the PowerPC inbound message queue
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ *
+ * Adds the @buf buffer to the PowerPC inbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+	int rc = 0;
+	struct rio_priv *priv = mport->priv;
+
+	pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
+		 priv->msg_rx_ring.rx_slot);
+
+	if (unlikely(priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot])) {
+		ERR("error adding inbound buffer %d, buffer exists\n",
+		       priv->msg_rx_ring.rx_slot);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot] = buf;
+	if (++priv->msg_rx_ring.rx_slot == priv->msg_rx_ring.size)
+		priv->msg_rx_ring.rx_slot = 0;
+
+      out:
+	return rc;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
+
+/**
+ * rio_hw_get_inb_message - Fetch inbound message from the PowerPC message unit
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ *
+ * Gets the next available inbound message from the inbound message queue.
+ * A pointer to the message is returned on success or NULL on failure.
+ */
+void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
+{
+	u32 phys_buf;
+	void *virt_buf = NULL;
+	void *buf = NULL;
+	int buf_idx;
+	struct rio_priv *priv = mport->priv;
+
+	phys_buf = in_be32(&priv->msg_regs->ifqdpar);
+
+	/* If no more messages, then bail out */
+	if (phys_buf == in_be32(&priv->msg_regs->ifqepar))
+		goto out2;
+
+	virt_buf = priv->msg_rx_ring.virt + (phys_buf - priv->msg_rx_ring.phys);
+	buf_idx = (phys_buf - priv->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+	buf = priv->msg_rx_ring.virt_buffer[buf_idx];
+
+	if (unlikely(!buf)) {
+		ERR("inbound message copy failed, no buffers\n");
+		goto out1;
+	}
+
+	/* Copy max message size, caller is expected to allocate that big */
+	memcpy(buf, virt_buf, RIO_MAX_MSG_SIZE);
+
+	/* Clear the available buffer */
+	priv->msg_rx_ring.virt_buffer[buf_idx] = NULL;
+
+      out1:
+	setbits32(&priv->msg_regs->imr, RIO_MSG_IMR_MI);
+
+      out2:
+	return buf;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
+
+/**
+ * fsl_rio_dbell_handler - PowerPC doorbell interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles doorbell interrupts. Parses a list of registered
+ * doorbell event handlers and executes a matching event handler.
+ */
+static irqreturn_t fsl_rio_dbell_handler(int irq, void *dev_instance)
+{
+	int dsr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+	struct rio_priv *priv = port->priv;
+
+	dsr = in_be32(&priv->msg_regs->dsr);
+
+	if (dsr & DOORBELL_DSR_TE) {
+		pr_info("RIO: doorbell reception error\n");
+		out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_TE);
+		goto out;
+	}
+
+	if (dsr & DOORBELL_DSR_QFI) {
+		pr_info("RIO: doorbell queue full\n");
+		out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_QFI);
+		goto out;
+	}
+
+	/* XXX Need to check/dispatch until queue empty */
+	if (dsr & DOORBELL_DSR_DIQI) {
+		u32 dmsg =
+		    (u32) priv->dbell_ring.virt +
+		    (in_be32(&priv->msg_regs->dqdpar) & 0xfff);
+		struct rio_dbell *dbell;
+		int found = 0;
+
+		pr_debug("RIO: processing doorbell, sid 0x%02x tid 0x%02x "
+				"info 0x%04x\n", DBELL_SID(dmsg),
+				DBELL_TID(dmsg), DBELL_INF(dmsg));
+
+		list_for_each_entry(dbell, &port->dbells, node) {
+			if ((dbell->res->start <= DBELL_INF(dmsg)) &&
+			    (dbell->res->end >= DBELL_INF(dmsg))) {
+				found = 1;
+				break;
+			}
+		}
+		if (found) {
+			dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
+				    DBELL_INF(dmsg));
+		} else {
+			pr_debug("RIO: spurious doorbell, sid 0x%02x "
+					"tid 0x%02x info %4.4x\n",
+					DBELL_SID(dmsg), DBELL_TID(dmsg),
+					DBELL_INF(dmsg));
+		}
+		setbits32(&priv->msg_regs->dmr, DOORBELL_DMR_DI);
+		out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_DIQI);
+	}
+
+      out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * fsl_rio_doorbell_init - PowerPC doorbell interface init
+ * @mport: Master port implementing the inbound doorbell unit
+ *
+ * Initializes doorbell unit hardware and inbound DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+static int fsl_rio_doorbell_init(struct rio_mport *mport, phys_addr_t dbaddr)
+{
+	int rc = 0;
+	struct rio_priv *priv = mport->priv;
+
+	/* Map outbound doorbell window immediately after maintenance window */
+	priv->dbell_win = ioremap(dbaddr, RIO_DBELL_WIN_SIZE);
+	if (!priv->dbell_win) {
+		ERR("unable to map outbound doorbell window\n");
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Initialize inbound doorbells */
+	priv->dbell_ring.virt = dma_alloc_coherent(NULL,
+						   512 * DOORBELL_MESSAGE_SIZE,
+						   &priv->dbell_ring.phys,
+						   GFP_KERNEL);
+	if (!priv->dbell_ring.virt) {
+		ERR("unable allocate inbound doorbell ring\n");
+		rc = -ENOMEM;
+		iounmap(priv->dbell_win);
+		goto out;
+	}
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32(&priv->msg_regs->dqdpar, (u32) priv->dbell_ring.phys);
+	out_be32(&priv->msg_regs->dqepar, (u32) priv->dbell_ring.phys);
+
+	/* Clear interrupt status */
+	out_be32(&priv->msg_regs->dsr, 0x00000091);
+
+	/* Hook up doorbell handler */
+	rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
+			 "dbell_rx", mport);
+	if (rc < 0) {
+		iounmap(priv->dbell_win);
+		dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+				  priv->dbell_ring.virt, priv->dbell_ring.phys);
+		ERR("unable to request inbound doorbell irq");
+		goto out;
+	}
+
+	/* Configure doorbells for snooping, 512 entries, and enable */
+	out_be32(&priv->msg_regs->dmr, 0x00108161);
+
+      out:
+	return rc;
+}
+
+u32 rio_get_mport_id(struct rio_mport *mport)
+{
+	u32 mport_id = 0;
+
+	rio_local_read_config_32(mport, 0x60, &mport_id);
+	mport_id = mport->sys_size ? (mport_id & 0xffff) : ((mport_id >> 16) & 0xff);
+	return mport_id;
+
+}
+
+static char *cmdline = NULL;
+
+static int fsl_rio_get_hdid(int index)
+{
+	/* XXX Need to parse multiple entries in some format */
+	if (!cmdline)
+		return -1;
+
+	return simple_strtol(cmdline, NULL, 0);
+}
+
+static int fsl_rio_get_cmdline(char *s)
+{
+	if (!s)
+		return 0;
+
+	cmdline = s;
+	return 1;
+}
+
+__setup("riohdid=", fsl_rio_get_cmdline);
+
+static struct rio_mem_ops fsl_mem_ops = {
+	.map_inb = fsl_rio_map_inb_mem,
+	.map_outb = fsl_rio_map_outb_mem,
+	.unmap_inb = fsl_rio_unmap_inb_mem,
+	.unmap_outb = fsl_rio_unmap_outb_mem,
+};
+
+static inline void fsl_rio_info(u32 ccsr)
+{
+	if (ccsr & 1) {
+		/* Serial phy */
+		INFO("Hardware port width: ");
+		switch (ccsr >> 30) {
+		case 0:
+			printk("1\n");
+			break;
+		case 1:
+			printk("4\n");
+			break;
+		default:
+			printk("Unknown\n");
+			break;;
+		}
+
+		INFO("Training connection status: ");
+		switch ((ccsr >> 27) & 7) {
+		case 0:
+			printk("Single-lane 0\n");
+			break;
+		case 1:
+			printk("Single-lane 2\n");
+			break;
+		case 2:
+			printk("Four-lane 2\n");
+			break;
+		default:
+			printk("Unknown\n");
+		}
+	} else {
+		/* Parallel phy */
+		if (ccsr & 0x80000000)
+			INFO("Output port operating in 8-bit mode\n");
+		if (ccsr & 0x08000000)
+			INFO("Input port operating in 8-bit mode\n");
+	}
+
+}
+
+static inline u8 hw_port_width(u32 ccsr)
+{
+	u8 pw = ccsr >> 30;
+	switch (pw) {
+	case 0:
+		return 1;
+	case 1:
+		return 4;
+	default:
+		return 0;
+	}
+}
+
+static int of_cells_get(struct device_node *np, const char *str)
+{
+	struct device_node *tmp = NULL;
+	const int *var = NULL;
+
+	var = of_get_property(np, str, NULL);
+	tmp = of_get_parent(np);
+
+	while (!var && tmp) {
+		var = (int *)of_get_property(tmp, str, NULL);
+		of_node_put(tmp);
+		tmp = of_get_parent(np);
+	}
+
+	return (var ? *var : 0);
+}
+
+/**
+ * fsl_rio_setup - Setup PowerPC RapidIO interface
+ *
+ * Initializes PowerPC RapidIO hardware interface, configures
+ * master port with system-specific info, and registers the
+ * master port with the RapidIO subsystem.
+ */
+int fsl_rio_setup(struct of_device *dev)
+{
+	struct rio_ops *ops = NULL;
+	struct rio_mport *port = NULL;
+	const u32 *dt_range;
+	int rlen = 0;
+	resource_size_t law_start = 0, law_size = 0;
+	struct resource regs;
+	int rc;
+	enum rio_phy_type phy_type;
+	volatile void __iomem *regs_win = NULL;
+	struct rio_priv *priv = NULL;
+	u32 ccsr;
+	int paw, aw, psw;
+	struct device_node *pa;
+
+	if (!dev->node) {
+		ERR("Dev ofnode is NULL\n");
+		return -EFAULT;
+	}
+
+	dt_range = of_get_property(dev->node, "ranges", &rlen);
+	if (!dt_range) {
+		ERR("Can't get %s property 'ranges'\n", dev->node->full_name);
+		return -EFAULT;
+	}
+
+	aw = of_cells_get(dev->node, "#address-cells");
+	pa = of_get_parent(dev->node);
+	paw = of_cells_get(pa, "#address-cells");
+	psw = of_cells_get(pa, "#size-cells");
+	of_node_put(pa);
+
+	law_start = of_read_number(dt_range + aw, paw);
+	law_size = of_read_number(dt_range + aw + paw, psw);
+
+	rc = of_address_to_resource(dev->node, 0, &regs);
+	if (rc) {
+		ERR("Can't get %s property 'reg'\n", dev->node->full_name);
+		return -EFAULT;
+	}
+	INFO("Of-device full name %s\n", dev->node->full_name);
+	INFO("LAW start 0x%016llx, size 0x%016llx.\n", (u64)law_start,
+						(u64)law_size);
+	INFO("Regs start 0x%08x size 0x%08x\n",	regs.start,
+						regs.end - regs.start + 1);
+
+	regs_win = ioremap(regs.start, regs.end - regs.start + 1);
+	if (!regs_win) {
+		ERR("Can't remap io for 'regs_win'\n");
+		rc = -ENOMEM;
+		goto err;
+	}
+
+	/* Probe the RapidIO phy type */
+	ccsr = in_be32(regs_win + RIO_CCSR);
+	if (ccsr & 1)
+		phy_type = RIO_PHY_SERIAL;
+	else
+		phy_type = RIO_PHY_PARALLEL;
+	INFO("Phy type: ");
+	switch (phy_type) {
+	case RIO_PHY_SERIAL:
+		printk("serial\n");
+		break;
+	case RIO_PHY_PARALLEL:
+		printk("parallel");
+		break;
+	default:
+		printk("Unknown type %d\n", phy_type);
+		rc = -EINVAL;
+		goto err;
+	};
+	fsl_rio_info(ccsr);
+
+
+	/* Checking the port training status */
+	if (in_be32((regs_win + RIO_ESCSR)) & 1) {
+		ERR("Port is not ready. Try to restart connection...\n");
+		switch (phy_type) {
+		case RIO_PHY_SERIAL:
+			/* Disable ports */
+			out_be32(regs_win + RIO_CCSR, 0);
+			/* Set 1x lane */
+			setbits32(regs_win + RIO_CCSR, 0x02000000);
+			/* Enable ports */
+			setbits32(regs_win + RIO_CCSR, 0x00600000);
+			break;
+		case RIO_PHY_PARALLEL:
+			/* Disable ports */
+			out_be32(regs_win + RIO_CCSR, 0x22000000);
+			/* Enable ports */
+			out_be32(regs_win + RIO_CCSR, 0x44000000);
+			break;
+		}
+		if (in_be32((regs_win + RIO_ESCSR)) & 1) {
+			ERR("Port restart failed.\n");
+			rc = -ENOLINK;
+			goto err;
+		}
+		INFO("Port restart success!");
+		ccsr = in_be32(regs_win + RIO_CCSR);
+		fsl_rio_info(ccsr);
+	}
+
+	ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
+	ops->lcread = fsl_local_config_read;
+	ops->lcwrite = fsl_local_config_write;
+	ops->cread = fsl_rio_config_read;
+	ops->cwrite = fsl_rio_config_write;
+	ops->dsend = fsl_rio_doorbell_send;
+
+	port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+	if (!port) {
+		ERR("Can't alloc memory for 'port'\n");
+		rc = -ENOMEM;
+		goto err;
+	}
+	port->id = 0;
+	port->index = 0;
+
+	port->sys_size = (in_be32((regs_win + RIO_PEF_CAR))
+				& RIO_PEF_CTLS) >> 4;
+	INFO("RapidIO Common Transport System size: %d\n",
+			port->sys_size ? 65536 : 256);
+
+	port->phy_type = phy_type;
+
+	priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
+	if (!priv) {
+		ERR("Can't alloc memory for 'priv'\n");
+		rc = -ENOMEM;
+		goto err;
+	}
+	port->priv = priv;
+	priv->regs_win = regs_win;
+	INIT_LIST_HEAD(&port->dbells);
+	port->iores.start = law_start;
+	port->iores.end = law_start + law_size;
+	port->iores.flags = IORESOURCE_MEM;
+	port->iores.name = "rio_io_win";
+
+	priv->bellirq = irq_of_parse_and_map(dev->node, 2);
+	priv->txirq = irq_of_parse_and_map(dev->node, 3);
+	priv->rxirq = irq_of_parse_and_map(dev->node, 4);
+	INFO("bellirq: %d, txirq: %d, rxirq %d\n", priv->bellirq,
+				priv->txirq, priv->rxirq);
+
+	rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+	rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+	rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+
+	strcpy(port->name, "RIO0 mport");
+
+	port->ops = ops;
+	port->mops = &fsl_mem_ops;
+	port->host_deviceid = fsl_rio_get_hdid(port->id);
+
+	rio_register_mport(port);
+
+	priv->atmu_regs = (struct rio_atmu_regs *)(regs_win +
+			RIO_ATMU_REGS_OFFSET);
+	priv->maint_atmu_regs = priv->atmu_regs + 1;
+	priv->dbell_atmu_regs = priv->atmu_regs + 2;
+	priv->msg_regs = (struct rio_msg_regs *)(regs_win +
+				((port->phy_type == RIO_PHY_SERIAL)
+					? RIO_S_MSG_REGS_OFFSET
+					: RIO_P_MSG_REGS_OFFSET));
+
+	/* Set to receive any dist ID for serial RapidIO controller. */
+	if (port->phy_type == RIO_PHY_SERIAL)
+		out_be32((regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
+
+	/* Configure maintenance transaction window */
+	if (!rio_request_io_region(port, NULL, law_start, RIO_MAINT_WIN_SIZE,
+				"maint_win", RIO_RESOURCE_MAINT, NULL)) {
+		rc = -EPERM;
+		ERR("request maint win error!\n");
+		goto err;
+	}
+	out_be32(&priv->maint_atmu_regs->rowbar,
+				(law_start >> 12) & 0xffffff);
+	out_be32(&priv->maint_atmu_regs->rowar, 0x80077000
+			| (__ilog2(RIO_MAINT_WIN_SIZE) - 1));
+
+	priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
+
+	/* Configure outbound doorbell window */
+	if (!rio_request_io_region(port, NULL, law_start + RIO_MAINT_WIN_SIZE,
+			RIO_DBELL_WIN_SIZE,
+			"dbell_win", RIO_RESOURCE_DOORBELL, NULL)) {
+		rc = -EPERM;
+		ERR("request doorbell win error!\n");
+		goto err;
+	}
+	out_be32(&priv->dbell_atmu_regs->rowbar, ((law_start +
+					RIO_MAINT_WIN_SIZE) >> 12) & 0xfffff);
+	out_be32(&priv->dbell_atmu_regs->rowar, 0x80042000
+			| (__ilog2(RIO_DBELL_WIN_SIZE) - 1));
+	rc = fsl_rio_doorbell_init(port, law_start + RIO_MAINT_WIN_SIZE);
+	if (rc)
+		goto err;
+
+	return 0;
+
+err:
+	if (regs_win)
+		iounmap(regs_win);
+	if (ops)
+		kfree(ops);
+	if (port)
+		kfree(port);
+	if (priv)
+		kfree(priv);
+	return rc;
+}
diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h
new file mode 100644
index 0000000..34231df
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rio.h
@@ -0,0 +1,20 @@
+/*
+ * Freescale PowerPC RapidIO definitions
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Zhang Wei <wei.zhang@freescale.com>, Jun 2007
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __POWERPC_SYSDEV_FSL_RIO_H
+#define __POWERPC_SYSDEV_FSL_RIO_H
+
+#include <linux/init.h>
+
+extern int fsl_rio_setup(struct of_device *of_dev);
+
+#endif				/* __POWERPC_SYSDEV_FSL_RIO_H */
-- 
1.5.1

[PATCH 5/5 v3] Add the memory management driver to RapidIO.

[Zhang Wei]

This patch adds the memory management driver to RapidIO.
The RapidIO system size is changed to automatically detection.
Add the memory mapping driver to RapidIO basic driver.
Multi master ports are supported.
Add a simple Bitmap RapidIO space allocator driver.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
 drivers/net/rionet.c                |   17 +-
 drivers/rapidio/Kconfig             |   18 +-
 drivers/rapidio/Makefile            |    1 +
 drivers/rapidio/rio-access.c        |   10 +-
 drivers/rapidio/rio-scan.c          |   53 +++--
 drivers/rapidio/rio-sysfs.c         |    3 +-
 drivers/rapidio/rio.c               |  479 ++++++++++++++++++++++++++++++++++-
 drivers/rapidio/rio.h               |    9 +-
 drivers/rapidio/sallocator/Kconfig  |    9 +
 drivers/rapidio/sallocator/Makefile |   12 +
 drivers/rapidio/sallocator/bitmap.c |  382 ++++++++++++++++++++++++++++
 include/linux/rio.h                 |   71 +++++-
 include/linux/rio_drv.h             |   41 +++-
 13 files changed, 1046 insertions(+), 59 deletions(-)
 create mode 100644 drivers/rapidio/sallocator/Kconfig
 create mode 100644 drivers/rapidio/sallocator/Makefile
 create mode 100644 drivers/rapidio/sallocator/bitmap.c

diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index df6b738..8dcda4d 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -78,7 +78,7 @@ static int rionet_capable = 1;
  * could be made into a hash table to save memory depending
  * on system trade-offs.
  */
-static struct rio_dev *rionet_active[RIO_MAX_ROUTE_ENTRIES];
+static struct rio_dev **rionet_active;
 
 #define is_rionet_capable(pef, src_ops, dst_ops)		\
 			((pef & RIO_PEF_INB_MBOX) &&		\
@@ -115,6 +115,7 @@ static int rionet_rx_clean(struct net_device *ndev)
 
 		rnet->rx_skb[i]->data = data;
 		skb_put(rnet->rx_skb[i], RIO_MAX_MSG_SIZE);
+		rnet->rx_skb[i]->dev = ndev;
 		rnet->rx_skb[i]->protocol =
 		    eth_type_trans(rnet->rx_skb[i], ndev);
 		error = netif_rx(rnet->rx_skb[i]);
@@ -202,7 +203,8 @@ static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	}
 
 	if (eth->h_dest[0] & 0x01) {
-		for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++)
+		for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rnet->mport->sys_size);
+				i++)
 			if (rionet_active[i])
 				rionet_queue_tx_msg(skb, ndev,
 						    rionet_active[i]);
@@ -392,6 +394,8 @@ static void rionet_remove(struct rio_dev *rdev)
 	struct net_device *ndev = NULL;
 	struct rionet_peer *peer, *tmp;
 
+	free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ?
+					__ilog2(sizeof(void *)) + 4 : 0);
 	unregister_netdev(ndev);
 	kfree(ndev);
 
@@ -449,6 +453,15 @@ static int rionet_setup_netdev(struct rio_mport *mport)
 		goto out;
 	}
 
+	if (!(rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL,
+				mport->sys_size ? __ilog2(sizeof(void *)) + 4
+				: 0))) {
+		rc = -ENOMEM;
+		goto out;
+	}
+	memset((void *)rionet_active, 0, sizeof(void *) *
+				RIO_MAX_ROUTE_ENTRIES(mport->sys_size));
+
 	/* Set up private area */
 	rnet = (struct rionet_private *)ndev->priv;
 	rnet->mport = mport;
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 4142115..f669108 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -1,14 +1,6 @@
 #
 # RapidIO configuration
 #
-config RAPIDIO_8_BIT_TRANSPORT
-	bool "8-bit transport addressing"
-	depends on RAPIDIO
-	---help---
-	  By default, the kernel assumes a 16-bit addressed RapidIO
-	  network. By selecting this option, the kernel will support
-	  an 8-bit addressed network.
-
 config RAPIDIO_DISC_TIMEOUT
 	int "Discovery timeout duration (seconds)"
 	depends on RAPIDIO
@@ -16,3 +8,13 @@ config RAPIDIO_DISC_TIMEOUT
 	---help---
 	  Amount of time a discovery node waits for a host to complete
 	  enumeration before giving up.
+
+config RAPIDIO_PROC_FS
+	bool "I/O and Memory resource debug"
+	depends on RAPIDIO && PROC_FS
+	default y
+	---help---
+	  Enable this option, it will create a /proc/riores node for
+	  monitoring the RapidIO I/O and Memory resource.
+
+source "drivers/rapidio/sallocator/Kconfig"
diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile
index 7c0e181..e5b2f11 100644
--- a/drivers/rapidio/Makefile
+++ b/drivers/rapidio/Makefile
@@ -4,3 +4,4 @@
 obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o
 
 obj-$(CONFIG_RAPIDIO)		+= switches/
+obj-$(CONFIG_RAPIDIO)		+= sallocator/
diff --git a/drivers/rapidio/rio-access.c b/drivers/rapidio/rio-access.c
index 8b56bbd..a3824ba 100644
--- a/drivers/rapidio/rio-access.c
+++ b/drivers/rapidio/rio-access.c
@@ -48,7 +48,7 @@ int __rio_local_read_config_##size \
 	u32 data = 0;							\
 	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
 	spin_lock_irqsave(&rio_config_lock, flags);			\
-	res = mport->ops->lcread(mport->id, offset, len, &data);	\
+	res = mport->ops->lcread(mport, mport->id, offset, len, &data);	\
 	*value = (type)data;						\
 	spin_unlock_irqrestore(&rio_config_lock, flags);		\
 	return res;							\
@@ -71,7 +71,7 @@ int __rio_local_write_config_##size \
 	unsigned long flags;						\
 	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
 	spin_lock_irqsave(&rio_config_lock, flags);			\
-	res = mport->ops->lcwrite(mport->id, offset, len, value);	\
+	res = mport->ops->lcwrite(mport, mport->id, offset, len, value);\
 	spin_unlock_irqrestore(&rio_config_lock, flags);		\
 	return res;							\
 }
@@ -108,7 +108,7 @@ int rio_mport_read_config_##size \
 	u32 data = 0;							\
 	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
 	spin_lock_irqsave(&rio_config_lock, flags);			\
-	res = mport->ops->cread(mport->id, destid, hopcount, offset, len, &data); \
+	res = mport->ops->cread(mport, mport->id, destid, hopcount, offset, len, &data); \
 	*value = (type)data;						\
 	spin_unlock_irqrestore(&rio_config_lock, flags);		\
 	return res;							\
@@ -131,7 +131,7 @@ int rio_mport_write_config_##size \
 	unsigned long flags;						\
 	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
 	spin_lock_irqsave(&rio_config_lock, flags);			\
-	res = mport->ops->cwrite(mport->id, destid, hopcount, offset, len, value); \
+	res = mport->ops->cwrite(mport, mport->id, destid, hopcount, offset, len, value); \
 	spin_unlock_irqrestore(&rio_config_lock, flags);		\
 	return res;							\
 }
@@ -166,7 +166,7 @@ int rio_mport_send_doorbell(struct rio_mport *mport, u16 destid, u16 data)
 	unsigned long flags;
 
 	spin_lock_irqsave(&rio_doorbell_lock, flags);
-	res = mport->ops->dsend(mport->id, destid, data);
+	res = mport->ops->dsend(mport, mport->id, destid, data);
 	spin_unlock_irqrestore(&rio_doorbell_lock, flags);
 
 	return res;
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 4442072..9d52e9b 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -73,7 +73,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
 
 	rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);
 
-	return RIO_GET_DID(result);
+	return RIO_GET_DID(port->sys_size, result);
 }
 
 /**
@@ -88,7 +88,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
 static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
 {
 	rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
-				  RIO_SET_DID(did));
+				  RIO_SET_DID(port->sys_size, did));
 }
 
 /**
@@ -100,7 +100,8 @@ static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u
  */
 static void rio_local_set_device_id(struct rio_mport *port, u16 did)
 {
-	rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(did));
+	rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(port->sys_size,
+				did));
 }
 
 /**
@@ -350,8 +351,17 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
 		rswitch->switchid = next_switchid;
 		rswitch->hopcount = hopcount;
 		rswitch->destid = destid;
+		if (!(rswitch->route_table = kzalloc(sizeof(u16)*
+					RIO_MAX_ROUTE_ENTRIES(port->sys_size),
+					GFP_KERNEL))) {
+			kfree(rdev);
+			rdev = NULL;
+			kfree(rswitch);
+			goto out;
+		}
 		/* Initialize switch route table */
-		for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES; rdid++)
+		for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);
+				rdid++)
 			rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
 		rdev->rswitch = rswitch;
 		sprintf(rio_name(rdev), "%02x:s:%04x", rdev->net->id,
@@ -480,7 +490,7 @@ static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
 {
 	u32 result;
 
-	rio_mport_read_config_32(port, RIO_ANY_DESTID, hopcount,
+	rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount,
 				 RIO_HOST_DID_LOCK_CSR, &result);
 
 	return (u16) (result & 0xffff);
@@ -571,14 +581,16 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 	}
 
 	/* Attempt to acquire device lock */
-	rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
+	rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+				  hopcount,
 				  RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
 	while ((tmp = rio_get_host_deviceid_lock(port, hopcount))
 	       < port->host_deviceid) {
 		/* Delay a bit */
 		mdelay(1);
 		/* Attempt to acquire device lock again */
-		rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
+		rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+					  hopcount,
 					  RIO_HOST_DID_LOCK_CSR,
 					  port->host_deviceid);
 	}
@@ -590,7 +602,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 	}
 
 	/* Setup new RIO device */
-	if ((rdev = rio_setup_device(net, port, RIO_ANY_DESTID, hopcount, 1))) {
+	if ((rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size),
+					hopcount, 1))) {
 		/* Add device to the global and bus/net specific list. */
 		list_add_tail(&rdev->net_list, &net->devices);
 	} else
@@ -598,7 +611,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 
 	if (rio_is_switch(rdev)) {
 		next_switchid++;
-		sw_inport = rio_get_swpinfo_inport(port, RIO_ANY_DESTID, hopcount);
+		sw_inport = rio_get_swpinfo_inport(port,
+				RIO_ANY_DESTID(port->sys_size), hopcount);
 		rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
 				    port->host_deviceid, sw_inport);
 		rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
@@ -612,7 +626,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 		}
 
 		num_ports =
-		    rio_get_swpinfo_tports(port, RIO_ANY_DESTID, hopcount);
+		    rio_get_swpinfo_tports(port, RIO_ANY_DESTID(port->sys_size),
+						hopcount);
 		pr_debug(
 		    "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
 		    rio_name(rdev), rdev->vid, rdev->did, num_ports);
@@ -624,13 +639,15 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 			cur_destid = next_destid;
 
 			if (rio_sport_is_active
-			    (port, RIO_ANY_DESTID, hopcount, port_num)) {
+			    (port, RIO_ANY_DESTID(port->sys_size), hopcount,
+			     port_num)) {
 				pr_debug(
 				    "RIO: scanning device on port %d\n",
 				    port_num);
 				rio_route_add_entry(port, rdev->rswitch,
 						    RIO_GLOBAL_TABLE,
-						    RIO_ANY_DESTID, port_num);
+						    RIO_ANY_DESTID(port->sys_size),
+						    port_num);
 
 				if (rio_enum_peer(net, port, hopcount + 1) < 0)
 					return -1;
@@ -735,7 +752,8 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
 				pr_debug(
 				    "RIO: scanning device on port %d\n",
 				    port_num);
-				for (ndestid = 0; ndestid < RIO_ANY_DESTID;
+				for (ndestid = 0;
+				     ndestid < RIO_ANY_DESTID(port->sys_size);
 				     ndestid++) {
 					rio_route_get_entry(port, rdev->rswitch,
 							    RIO_GLOBAL_TABLE,
@@ -796,7 +814,7 @@ static int rio_mport_is_active(struct rio_mport *port)
  * network list of associated master ports. Returns a
  * RIO network pointer on success or %NULL on failure.
  */
-static struct rio_net __devinit *rio_alloc_net(struct rio_mport *port)
+static struct rio_net *rio_alloc_net(struct rio_mport *port)
 {
 	struct rio_net *net;
 
@@ -917,7 +935,9 @@ static void rio_build_route_tables(void)
 
 	list_for_each_entry(rdev, &rio_devices, global_list)
 	    if (rio_is_switch(rdev))
-		for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
+		for (i = 0;
+		     i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+		     i++) {
 			if (rio_route_get_entry
 			    (rdev->net->hport, rdev->rswitch, RIO_GLOBAL_TABLE,
 			     i, &sport) < 0)
@@ -981,7 +1001,8 @@ int rio_disc_mport(struct rio_mport *mport)
 		del_timer_sync(&rio_enum_timer);
 
 		pr_debug("done\n");
-		if (rio_disc_peer(net, mport, RIO_ANY_DESTID, 0) < 0) {
+		if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
+					0) < 0) {
 			printk(KERN_INFO
 			       "RIO: master port %d device has failed discovery\n",
 			       mport->id);
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index 659e311..97a147f 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -43,7 +43,8 @@ static ssize_t routes_show(struct device *dev, struct device_attribute *attr, ch
 	if (!rdev->rswitch)
 		goto out;
 
-	for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
+	for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+			i++) {
 		if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE)
 			continue;
 		str +=
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index f644807..5248774 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -23,10 +23,22 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
+#include <linux/seq_file.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/dma-mapping.h>
+#include <linux/hardirq.h>
 
 #include "rio.h"
 
+#define ERR(fmt, arg...) \
+	printk(KERN_ERR "%s:%s: " fmt,  __FILE__, __FUNCTION__, ## arg)
+
 static LIST_HEAD(rio_mports);
+static LIST_HEAD(rio_inb_mems);
+static LIST_HEAD(rio_outb_mems);
+
+static DEFINE_SPINLOCK(rio_config_lock);
 
 /**
  * rio_local_get_device_id - Get the base/extended device id for a port
@@ -42,7 +54,7 @@ u16 rio_local_get_device_id(struct rio_mport *port)
 
 	rio_local_read_config_32(port, RIO_DID_CSR, &result);
 
-	return (RIO_GET_DID(result));
+	return (RIO_GET_DID(port->sys_size, result));
 }
 
 /**
@@ -332,6 +344,350 @@ int rio_release_outb_dbell(struct rio_dev *rdev, struct resource *res)
 }
 
 /**
+ * rio_request_io_region -- request resource in RapidIO IO region
+ * @mport: Master port
+ * @devid: Device specific pointer to pass
+ * @start: IO resource start address
+ * @size: IO resource size
+ * @name: Resource name
+ * @flag: Flag for resource
+ * @res: Return resource which has been allocated. If res == NULL,
+ *       the function will alloc the memory for return resource.
+ *
+ * Return: The resource which has been allocated.
+ */
+struct resource *rio_request_io_region(struct rio_mport *mport, void *devid,
+		resource_size_t start, resource_size_t size,
+		const char *name, unsigned long flags,
+		struct resource *res)
+{
+	if (!res && !(res = kmalloc(sizeof(struct resource), GFP_KERNEL))) {
+		ERR("No free memory for res alloc!\n");
+		goto err;
+	}
+	memset(res, 0, sizeof(struct resource));
+	size = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+	/* if start == 0 then auto locate the start address */
+	if (!start) {
+		if (allocate_resource(&mport->iores, res, size,
+				mport->iores.start, mport->iores.end,
+				size, NULL, NULL) < 0) {
+			ERR("allocte resource error!\n");
+			goto err;
+		}
+		res->name = name;
+		res->flags = flags;
+	} else {
+		rio_init_io_res(res, start, start + size - 1, name, flags);
+		if (request_resource(&mport->iores, res) < 0) {
+			ERR("Can't get SRIO IO resource!\n");
+			goto err;
+		}
+	}
+	return res;
+
+err:
+	if (res)
+		kfree(res);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(rio_request_io_region);
+
+/**
+ * rio_map_inb_region -- Mapping inbound memory region.
+ * @mport: Master port.
+ * @mem: Memory struction for mapping.
+ * @rflags: Flags for mapping.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the mapping from the mem->riores to mem->iores.
+ */
+int rio_map_inb_region(struct rio_mport *mport, struct rio_mem *mem, u32 rflags)
+{
+	int rc = 0;
+	unsigned long flags;
+
+	if (!mport->mops)
+		return -1;
+	spin_lock_irqsave(&rio_config_lock, flags);
+	rc = mport->mops->map_inb(mport, mem->iores.start, mem->riores.start, mem->size, rflags);
+	spin_unlock_irqrestore(&rio_config_lock, flags);
+	return rc;
+}
+
+/**
+ * rio_map_outb_region -- Mapping outbound memory region.
+ * @mport: Master port.
+ * @tid: Target RapidIO device id.
+ * @mem: Memory struction for mapping.
+ * @rflags: Flags for mapping.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the mapping from the mem->iores to mem->riores.
+ */
+int rio_map_outb_region(struct rio_mport *mport, u16 tid,
+		struct rio_mem *mem, u32 rflags)
+{
+	int rc = 0;
+	unsigned long flags;
+
+	if (!mport->mops)
+		return -1;
+	spin_lock_irqsave(&rio_config_lock, flags);
+	rc = mport->mops->map_outb(mport, mem->iores.start, mem->riores.start, mem->size, tid, rflags);
+	spin_unlock_irqrestore(&rio_config_lock, flags);
+	return rc;
+}
+
+/**
+ * rio_unmap_inb_region -- Unmap the inbound memory region
+ * @mport: Master port
+ * @mem: Memory struction for unmapping.
+ */
+void rio_unmap_inb_region(struct rio_mport *mport, struct rio_mem *mem)
+{
+	unsigned long flags;
+	if (!mport->mops)
+		return;
+	spin_lock_irqsave(&rio_config_lock, flags);
+	mport->mops->unmap_inb(mport, mem->iores.start);
+	spin_unlock_irqrestore(&rio_config_lock, flags);
+}
+
+/**
+ * rio_unmap_outb_region -- Unmap the outbound memory region
+ * @mport: Master port
+ * @mem: Memory struction for unmapping.
+ */
+void rio_unmap_outb_region(struct rio_mport *mport, struct rio_mem *mem)
+{
+	unsigned long flags;
+	if (!mport->mops)
+		return;
+	spin_lock_irqsave(&rio_config_lock, flags);
+	mport->mops->unmap_outb(mport, mem->iores.start);
+	spin_unlock_irqrestore(&rio_config_lock, flags);
+}
+
+/**
+ * rio_release_inb_region -- Release the inbound region resource.
+ * @mport: Master port
+ * @mem: Inbound region descriptor
+ *
+ * Return 0 is successed.
+ */
+int rio_release_inb_region(struct rio_mport *mport, struct rio_mem *mem)
+{
+	int rc = 0;
+	if (!mem)
+		return rc;
+	rio_unmap_inb_region(mport, mem);
+	if (mem->virt)
+		dma_free_coherent(NULL, mem->size, mem->virt, mem->iores.start);
+
+	if (mem->iores.parent)
+		rc = release_resource(&mem->iores);
+	if (mem->riores.parent && !rc)
+		rc = release_resource(&mem->riores);
+
+	if (mem->node.prev)
+		list_del(&mem->node);
+
+	kfree(mem);
+
+	return rc;
+}
+
+/**
+ * rio_request_inb_region -- Request inbound memory region
+ * @mport: Master port
+ * @dev_id: Device specific pointer to pass
+ * @size: The request memory windows size
+ * @name: The region name
+ * @owner: The region owner driver id
+ *
+ * Retrun: The rio_mem struction for inbound memory descriptor.
+ *
+ * This function is used for request RapidIO space inbound region. If the size
+ * less than 4096 or not aligned to 2^N, it will be adjusted. The function will
+ * alloc a block of local DMA memory of the size for inbound region target and
+ * request a RapidIO region for inbound region source. Then the inbound region
+ * will be claimed in RapidIO space and the local DMA memory will be added to
+ * local inbound memory list. The rio_mem with the inbound relationship will
+ * be returned.
+ */
+struct rio_mem *rio_request_inb_region(struct rio_mport *mport, void *dev_id,
+		resource_size_t size, const char *name, u32 owner)
+{
+	struct rio_mem *rmem = NULL;
+	int ret;
+
+	rmem = kzalloc(sizeof(struct rio_mem), GFP_KERNEL);
+	if (!rmem)
+		goto err;
+
+	/* Align the size to 2^N */
+	size = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+	/* Alloc the RapidIO space */
+	ret = rio_space_request(mport, size, &rmem->riores);
+	if (ret) {
+		printk(KERN_ERR "RIO space request error! ret = %d\n", ret);
+		goto err;
+	}
+
+	rmem->riores.name = name;
+	rmem->size = rmem->riores.end - rmem->riores.start + 1;
+
+	/* Initialize inbound memory */
+	if (!(rmem->virt = dma_alloc_coherent(NULL, rmem->size,
+				&rmem->iores.start, GFP_KERNEL))) {
+		ERR("Inbound memory alloc error\n");
+		goto err;
+	}
+	rmem->iores.end = rmem->iores.start + rmem->size - 1;
+	rmem->owner = owner;
+
+	/* Map RIO space to local DMA memory */
+	if ((ret = rio_map_inb_region(mport, rmem, 0))) {
+		printk(KERN_ERR "RIO map inbound mem error, ret = %d\n", ret);
+		goto err;
+	}
+
+	/* Claim the region */
+	if ((ret = rio_space_claim(rmem))) {
+		printk(KERN_ERR "RIO inbound mem claim error, ret = %d\n", ret);
+		goto err;
+	}
+	list_add(&rmem->node, &rio_inb_mems);
+
+	return rmem;
+
+err:
+	rio_release_inb_region(mport, rmem);
+	return NULL;
+}
+
+/**
+ * rio_release_outb_region -- Release the outbound region resource.
+ * @mport: Master port
+ * @mem: Outbound region descriptor
+ *
+ * Return 0 is successed.
+ */
+int rio_release_outb_region(struct rio_mport *mport, struct rio_mem *mem)
+{
+	int rc = 0;
+	if (!mem)
+		return rc;
+	rio_unmap_outb_region(mport, mem);
+	rio_space_release(mem);
+	if (mem->virt)
+		iounmap(mem->virt);
+
+	if (mem->iores.parent)
+		rc = release_resource(&mem->iores);
+	if (mem->riores.parent && !rc)
+		rc = release_resource(&mem->riores);
+
+	if (mem->node.prev)
+		list_del(&mem->node);
+
+	kfree(mem);
+
+	return rc;
+}
+
+/** rio_prepare_io_mem -- Prepare IO region for RapidIO outbound mapping
+ * @mport: Master port
+ * @dev: RIO device specific pointer to pass
+ * @size: Request IO size
+ * @name: The request IO resource name
+ *
+ * Return: The rio_mem descriptor with IO region resource.
+ *
+ * This function request IO region firstly and ioremap it for preparing
+ * outbound window mapping. The function do not map the outbound region
+ * because ioremap can not located at the interrupt action function.
+ * The function can be called in the initialization for just prepared.
+ */
+struct rio_mem *rio_prepare_io_mem(struct rio_mport *mport,
+		struct rio_dev *dev, resource_size_t size, const char *name)
+{
+	struct rio_mem *rmem = NULL;
+
+	rmem = kzalloc(sizeof(struct rio_mem), GFP_KERNEL);
+	if (!rmem)
+		goto err;
+
+	/* Align the size to 2^N */
+	size = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+	/* Request RapidIO IO region */
+	if (!(rio_request_io_region(mport, dev, 0, size,
+				name, RIO_RESOURCE_MEM, &rmem->iores))) {
+		ERR("RIO io region request error!\n");
+		goto err;
+	}
+
+	rmem->virt = ioremap((phys_addr_t)(rmem->iores.start), size);
+	rmem->size = size;
+
+	list_add(&rmem->node, &rio_outb_mems);
+	return rmem;
+err:
+	rio_release_outb_region(mport, rmem);
+	return NULL;
+}
+
+/** rio_request_outb_region -- Request IO region and get outbound region
+ *                             for RapidIO outbound mapping
+ * @mport: Master port
+ * @dev_id: RIO device specific pointer to pass
+ * @size: Request IO size
+ * @name: The request IO resource name
+ * @owner: The outbound region owned driver
+ *
+ * Return: The rio_mem descriptor with IO region resource.
+ *
+ * This function request IO region firstly and ioremap it for preparing
+ * outbound window mapping. And it will find the RapidIO region owned by
+ * the driver id. Then map it. Be careful about that the ioremap can not
+ * be called in the interrupt event action function.
+ */
+struct rio_mem *rio_request_outb_region(struct rio_mport *mport, void *dev_id,
+			resource_size_t size, const char *name, u32 owner)
+{
+	struct rio_mem *rmem = NULL;
+	struct rio_dev *dev = dev_id;
+
+	if (!dev)
+		goto err;
+
+	rmem = rio_prepare_io_mem(mport, dev, size, name);
+	if (!rmem)
+		goto err;
+
+	if (rio_space_find_mem(mport, dev->destid, owner, &rmem->riores)) {
+		ERR("Can not find RIO region meet the ownerid %x\n", owner);
+		goto err;
+	}
+
+	/* Map the rio space to local */
+	if (rio_map_outb_region(mport, dev->destid, rmem, 0)) {
+		ERR("RIO map outb error!\n");
+		goto err;
+	}
+	return rmem;
+err:
+	rio_release_outb_region(mport, rmem);
+	return NULL;
+}
+
+/**
  * rio_mport_get_feature - query for devices' extended features
  * @port: Master port to issue transaction
  * @local: Indicate a local master port or remote device access
@@ -476,8 +832,8 @@ int rio_init_mports(void)
 					port->iores.end - port->iores.start,
 					port->name)) {
 			printk(KERN_ERR
-			       "RIO: Error requesting master port region %8.8lx-%8.8lx\n",
-			       port->iores.start, port->iores.end - 1);
+			       "RIO: Error requesting master port region %016llx-%016llx\n",
+			       (u64)port->iores.start, (u64)port->iores.end - 1);
 			rc = -ENOMEM;
 			goto out;
 		}
@@ -486,6 +842,7 @@ int rio_init_mports(void)
 			rio_enum_mport(port);
 		else
 			rio_disc_mport(port);
+		rio_space_init(port);
 	}
 
       out:
@@ -508,3 +865,119 @@ EXPORT_SYMBOL_GPL(rio_request_inb_mbox);
 EXPORT_SYMBOL_GPL(rio_release_inb_mbox);
 EXPORT_SYMBOL_GPL(rio_request_outb_mbox);
 EXPORT_SYMBOL_GPL(rio_release_outb_mbox);
+
+#ifdef CONFIG_RAPIDIO_PROC_FS
+enum { MAX_IORES_LEVEL = 5 };
+
+struct riors {
+	struct rio_mport *mp;
+	int res;
+	struct resource *p;
+} riomres;
+
+static void *r_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	struct resource *p = v;
+	struct riors *rs = m->private;
+
+	(*pos)++;
+	if (p->child)
+		return p->child;
+	while (!p->sibling && p->parent)
+		p = p->parent;
+	if (p->sibling)
+		return p->sibling;
+	else {
+		rs->res++;
+		if(rs->res >= RIO_MAX_MPORT_RESOURCES) {
+			rs->mp = list_entry(rs->mp->node.next, struct rio_mport, node);
+			rs->res = 0;
+			if (&rs->mp->node == &rio_mports)
+				return NULL;
+		}
+		seq_printf(m, "%2d: ", rs->res);
+		rs->p = &rs->mp->riores[rs->res];
+		p = rs->p;
+
+		return p;
+	}
+}
+
+static void *r_start(struct seq_file *m, loff_t *pos)
+{
+	struct riors *rs = m->private;
+	struct resource *p;
+
+	if (*pos) {
+		*pos = 0;
+		return NULL;
+	}
+
+	rs->mp = list_entry(rio_mports.next, struct rio_mport, node);
+	rs->res = -1;
+	rs->p = &rs->mp->iores;
+	p = rs->p;
+
+	seq_printf(m, "IO: ");
+
+	return p;
+}
+
+static void r_stop(struct seq_file *m, void *v)
+{
+}
+
+static int r_show(struct seq_file *m, void *v)
+{
+	struct riors *rs = m->private;
+	struct resource *root = rs->p;
+	struct resource *r = v, *p;
+	int width = root->end < 0x10000 ? 4 : 8;
+	int depth;
+
+	for (depth = 0, p = r; p->parent && depth < MAX_IORES_LEVEL; depth++, p = p->parent)
+		if (p == root)
+			break;
+	seq_printf(m, "%*s%0*llx-%0*llx : %s\n",
+			depth * 2, "",
+			width, (unsigned long long) r->start,
+			width, (unsigned long long) r->end,
+			r->name ? r->name : "<BAD>");
+	return 0;
+}
+
+static const struct seq_operations resource_op = {
+	.start	= r_start,
+	.next	= r_next,
+	.stop	= r_stop,
+	.show	= r_show,
+};
+
+static int riores_open(struct inode *inode, struct file *file)
+{
+	int res = seq_open(file, &resource_op);
+	if (!res) {
+		struct seq_file *m = file->private_data;
+		m->private = &riomres;
+	}
+	return res;
+}
+
+static const struct file_operations proc_riores_operations = {
+	.open		= riores_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init rioresources_init(void)
+{
+	struct proc_dir_entry *entry;
+
+	entry = create_proc_entry("riores", 0, NULL);
+	if (entry)
+		entry->proc_fops = &proc_riores_operations;
+	return 0;
+}
+__initcall(rioresources_init);
+#endif
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index b242cee..7a3b62e 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -51,10 +51,5 @@ extern struct rio_route_ops __end_rio_route_ops[];
 	DECLARE_RIO_ROUTE_SECTION(.rio_route_ops,			\
 			vid, did, add_hook, get_hook)
 
-#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
-#define RIO_GET_DID(x)	((x & 0x00ff0000) >> 16)
-#define RIO_SET_DID(x)	((x & 0x000000ff) << 16)
-#else
-#define RIO_GET_DID(x)	(x & 0xffff)
-#define RIO_SET_DID(x)	(x & 0xffff)
-#endif
+#define RIO_GET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
+#define RIO_SET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
diff --git a/drivers/rapidio/sallocator/Kconfig b/drivers/rapidio/sallocator/Kconfig
new file mode 100644
index 0000000..a33a1b8
--- /dev/null
+++ b/drivers/rapidio/sallocator/Kconfig
@@ -0,0 +1,9 @@
+choice
+	prompt "Default RapidIO Space Allocator"
+	depends on RAPIDIO
+	default RIO_SA_DEFAULT_BITMAP
+
+	config RIO_SA_DEFAULT_BITMAP
+		bool "Bitmap"
+
+endchoice
diff --git a/drivers/rapidio/sallocator/Makefile b/drivers/rapidio/sallocator/Makefile
new file mode 100644
index 0000000..437201c
--- /dev/null
+++ b/drivers/rapidio/sallocator/Makefile
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+#
+# Author: Zhang Wei, wei.zhang@freescale.com, Jun 2007
+#
+# This is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+
+obj-$(CONFIG_RIO_SA_DEFAULT_BITMAP) += bitmap.o
diff --git a/drivers/rapidio/sallocator/bitmap.c b/drivers/rapidio/sallocator/bitmap.c
new file mode 100644
index 0000000..f1c837e
--- /dev/null
+++ b/drivers/rapidio/sallocator/bitmap.c
@@ -0,0 +1,382 @@
+/*
+ * RapidIO space allocator bitmap arithmetic.
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Zhang Wei <wei.zhang@freescale.com>, Jun 2007
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * The Bitmap allocator make the whole RapidIO device have the same fixed
+ * inbound memory window. And on the top of each device inbound window,
+ * there is a sect0 area, which will use for recording the individual
+ * driver owned memory space in device.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/rio_regs.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/seq_file.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/dma-mapping.h>
+
+#include "../rio.h"
+
+#undef DEBUG
+
+#define RIO_SBLOCK_SIZE	4096
+
+#define ERR(fmt, arg...) \
+	printk(KERN_ERR "ERROR %s - %s: " fmt,  __FILE__, __FUNCTION__, ## arg)
+#ifdef DEBUG
+#define DBG(fmt...) printk(fmt)
+#else
+#define DBG(fmt...) do {} while (0)
+#endif
+
+#define IS_64BIT_RES ((sizeof(resource_size_t) == 8) ? 1 : 0)
+#define SA_BITMAP_DRV_ID	0x4249544d
+#define SA_RIO_RESERVE_SPACE	0x4000000
+
+/* Definition for struct rio_res:ctrl */
+#define SA_RIO_RES_CTRL_EN	0x80000000
+struct rio_res {
+	u32 ctrl;	/* Control words
+			 * Bit 31: Enable bit.
+			 */
+	u32 addr;	/* The start addr bits [0-31] of RapidIO window */
+	u32 extaddr;	/* The start addr bits [32-63] of RapidIO window */
+	u32 size;	/* The size bits [0-31] of RapidIO window */
+	u32 extsize;	/* The size bits [32-63] of RapidIO window */
+	u32 owner;	/* The owner driver id */
+	u32 rev[2];	/* For align 32 bytes */
+};
+
+#define SA_BITMAP_MAX_INB_RES	32
+struct rio_sect0 {
+	u32	id;		/* ID for Bitmap space allocater driver */
+	u32	rioid;		/* RapidIO device id */
+	u32	width;		/* The resource width for RIO space, 32 or 64 */
+	u8	rev1[56];	/* Align to 64 bytes */
+	struct rio_res inb_res[SA_BITMAP_MAX_INB_RES];
+	u8	rev2[4096 - 64 - SA_BITMAP_MAX_INB_RES * 32];
+				/* Fill for 4096 bytes */
+};
+
+/* if select 64bit resource, we can use 34-bit rio address, otherwise 32-bit */
+static int rio_addr_size;
+static struct resource *root;
+static struct rio_mem sect0mem;		/* Sect 0 memory data */
+static struct rio_sect0	*sect0 = NULL;
+static struct rio_mem *sblock_buf = NULL;
+
+/**
+ * get_rio_addr_size -- get the RapidIO space address size.
+ *
+ * If it's a 64-bit system, the RapidIO space address size could be 34bit,
+ * otherwise, it should be 32 bit.
+ */
+static inline int get_rio_addr_size(void)
+{
+	return (sizeof(resource_size_t) == 8) ? 34 : 32;
+}
+
+/**
+ * rio_space_request -- request RapidIO space.
+ * @mport: RIO master port.
+ * @size: The request space size, must >= 4096.
+ * @new: The resource which required.
+ *
+ * Return:
+ *	0 -- Success
+ *	-EINVAL -- size is wrong (<4096)
+ *	-EFAULT -- new is NULL
+ *	others -- return from allocate_resource()
+ *
+ * This function request a memory from RapidIO space.
+ */
+int rio_space_request(struct rio_mport *mport, resource_size_t size,
+			struct resource *new)
+{
+	int ret = 0;
+
+	/* Align the size to 2^N */
+	size = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+	memset(new, 0, sizeof(struct resource));
+
+	ret = allocate_resource(root, new, size, root->start, root->end,
+			size, NULL, 0);
+	if (ret) {
+		ERR("No more resource for size 0x%08x!\n", size);
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+#ifdef DEBUG
+/**
+ * rio_sa_dump_sect0 -- Dump the sect0 content.
+ * @psect0: The point of sect0
+ */
+static void rio_sa_dump_sect0(struct rio_sect0 *psect0)
+{
+	int i;
+
+	if (!psect0)
+		return;
+
+	printk("Rio Sect0 %p dump:\n", psect0);
+	printk("...id = 0x%08x, width = %d, rioid = %d \n",
+			psect0->id, psect0->width, psect0->rioid);
+	for (i = 0; i < SA_BITMAP_MAX_INB_RES; i++)
+		if (psect0->inb_res[i].ctrl & SA_RIO_RES_CTRL_EN)
+			printk("...inb_res[%d]: ctrl 0x%08x, owner 0x%08x\n"
+				"\t\textaddr 0x%08x, addr 0x%08x\n"
+				"\t\textsize 0x%08x, size 0x%08x\n", i,
+			       psect0->inb_res[i].ctrl,
+			       psect0->inb_res[i].owner,
+			       psect0->inb_res[i].extaddr,
+			       psect0->inb_res[i].addr,
+			       psect0->inb_res[i].extsize,
+			       psect0->inb_res[i].size);
+}
+#endif
+
+/**
+ * rio_space_claim -- Claim the memory in RapidIO space
+ * @mem: The memory should be claimed.
+ *
+ * When you get a memory space and get ready of it, you should claim it in
+ * RapidIO space. Then, the other device could get the memory by calling
+ * rio_space_find_mem().
+ */
+int rio_space_claim(struct rio_mem *mem)
+{
+	int i;
+
+	if (!sect0) {
+		ERR("Sect0 is NULL!\n");
+		return -EINVAL;
+	}
+#ifdef DEBUG
+	rio_sa_dump_sect0(sect0);
+#endif
+
+	for (i = 0; i < SA_BITMAP_MAX_INB_RES; i++)
+		if (!(sect0->inb_res[i].ctrl & SA_RIO_RES_CTRL_EN)) {
+			sect0->inb_res[i].ctrl |= SA_RIO_RES_CTRL_EN;
+			sect0->inb_res[i].addr = (u32)(mem->riores.start);
+			sect0->inb_res[i].size = (u32)(mem->riores.end
+					- mem->riores.start + 1);
+			if (IS_64BIT_RES) {
+				sect0->inb_res[i].extaddr =
+					(u64)mem->riores.start >> 32;
+				sect0->inb_res[i].extsize =
+					(u64)(mem->riores.end
+						- mem->riores.start + 1) >> 32;
+			}
+			sect0->inb_res[i].owner = mem->owner;
+			DBG("The new inbound rio mem added:\n");
+			DBG("...inb_res[%d]: ctrl 0x%08x, owner 0x%08x\n"
+				"\t\textaddr 0x%08x, addr 0x%08x\n"
+				"\t\textsize 0x%08x, size 0x%08x\n", i,
+			       sect0->inb_res[i].ctrl,
+			       sect0->inb_res[i].owner,
+			       sect0->inb_res[i].extaddr,
+			       sect0->inb_res[i].addr,
+			       sect0->inb_res[i].extsize,
+			       sect0->inb_res[i].size);
+			return 0;
+		}
+
+	ERR("No free inbound window!\n");
+	return -EBUSY;
+}
+
+/**
+ * rio_space_release -- remove the memory record from RapidIO space.
+ *		        It's the pair function of rio_space_claim().
+ *
+ * @inbmem: The memory should be release.
+ */
+void rio_space_release(struct rio_mem *inbmem)
+{
+	int i;
+
+	/* Remove it from sect0 inb_res array */
+	for (i = 0; i < SA_BITMAP_MAX_INB_RES; i++)
+		if ((sect0->inb_res[i].ctrl & SA_RIO_RES_CTRL_EN) &&
+				(((u64)sect0->inb_res[i].extaddr << 32 |
+				  sect0->inb_res[i].addr)
+				== (u64)inbmem->riores.start)) {
+			sect0->inb_res[i].ctrl = 0;
+			sect0->inb_res[i].addr = 0;
+			sect0->inb_res[i].extaddr = 0;
+			sect0->inb_res[i].size = 0;
+			sect0->inb_res[i].extsize = 0;
+		}
+}
+
+/**
+ * rio_space_get_dev_mem -- get the whole owned inbound space of
+ *			    RapidIO device with did.
+ */
+static struct resource *rio_space_get_dev_mem(struct rio_mport *mport,
+		u16 did, struct resource *res)
+{
+	if(!res && !(res = kmalloc(sizeof(struct resource), GFP_KERNEL))) {
+		ERR("resource alloc error!\n");
+		return NULL;
+	}
+	memset(res, 0, sizeof(struct resource));
+
+	res->start = SA_RIO_RESERVE_SPACE + (did
+		<< (rio_addr_size - __ilog2(RIO_ANY_DESTID(mport->sys_size)
+						+ 1)));
+	res->end = res->start +
+		(1 << (rio_addr_size - __ilog2(RIO_ANY_DESTID(mport->sys_size)
+						+ 1))) - 1;
+	res->flags = RIO_RESOURCE_MEM;
+
+	return res;
+}
+
+/**
+ * rio_space_find_mem -- Find the memory space (RIO) of the rio driver owned.
+ * @mport: RIO master port.
+ * @tid: The target RapidIO device id which will be searched.
+ * @owner: The driver id as the search keyword.
+ * @res: The result of finding.
+ *
+ * return:
+ *	0 -- Success
+ *	-EFAULT -- Remote sect0 is a bad address
+ *	-EPROTONOSUPPORT -- The remote space allocator protocol is not support
+ *
+ * This function will find the memory located in RapidIO space, which is owned
+ * by the driver. If the remote RapidIO device use the diffrent space allocator,
+ * it will return -EPROTONOSUPPORT.
+ */
+int rio_space_find_mem(struct rio_mport *mport, u16 tid,
+			u32 owner, struct resource *res)
+{
+	volatile struct rio_sect0 __iomem *rsect0;
+	int i;
+	int ret = 0;
+	u32 width;
+
+	rio_space_get_dev_mem(mport, tid, &sblock_buf->riores);
+	sblock_buf->size = RIO_SBLOCK_SIZE;
+	rio_map_outb_region(mport, tid, sblock_buf, 0);
+
+	if (!sblock_buf->virt) {
+		ERR("Sect0 block buffer is NULL!\n");
+		ret = -EFAULT;
+		goto out;
+	}
+	rsect0 = sblock_buf->virt;
+
+	if (in_be32(&rsect0->id) != SA_BITMAP_DRV_ID) {
+		DBG("The target RapidIO space allocator is not rio_sa_bitmap! "
+				"id = 0x%x\n", rsect0->id);
+		ret = -EPROTONOSUPPORT;
+		goto out;
+	}
+
+#ifdef DEBUG
+	/* Dump remote sect0 for debug */
+	DBG("Dump the remote RIO dev %d sect0\n", tid);
+	rio_sa_dump_sect0(rsect0);
+#endif
+
+	width = in_be32(&rsect0->width);
+	if (sizeof(resource_size_t) * 8 < width)
+		printk(KERN_WARNING "WARNING: The system width %d is smaller "
+			"than the remote RapidIO space address width %d!",
+			sizeof(resource_size_t) * 8, width);
+
+	/* Find the rio space block */
+	for (i = 0; i < SA_BITMAP_MAX_INB_RES; i++)
+		if ((in_be32(&rsect0->inb_res[i].ctrl) & SA_RIO_RES_CTRL_EN)
+			  && (in_be32(&rsect0->inb_res[i].owner) == owner )) {
+			if (!res) {
+				ERR("Resource NULL error!\n");
+				ret = -EFAULT;
+				goto out;
+			}
+			memset(res, 0, sizeof(struct resource));
+			res->start = (IS_64BIT_RES && (width > 32)) ?
+				in_be32(&rsect0->inb_res[i].extaddr) << 32 : 0
+				| rsect0->inb_res[i].addr;
+			res->end = res->start - 1 +
+				  ((in_be32(&rsect0->inb_res[i].size)) |
+				  ((IS_64BIT_RES && (width > 32)) ?
+				  ((u64)(in_be32(&rsect0->inb_res[i].extsize))
+				   << 32) : 0));
+			goto out;
+		}
+
+out:
+	rio_unmap_outb_region(mport, sblock_buf);
+	return ret;
+}
+
+/**
+ * rio_space_init -- RapidIO space allocator initialization function.
+ * @mport: The master port.
+ */
+int rio_space_init(struct rio_mport *mport)
+{
+	root = &mport->riores[RIO_INB_MEM_RESOURCE];
+	memset(root, 0, sizeof(struct resource));
+
+	rio_addr_size = get_rio_addr_size();
+
+	rio_space_get_dev_mem(mport, rio_get_mport_id(mport), root);
+	root->name = "rio_space_inb";
+
+	/* Alloc the sect 0 for space managerment */
+	memset(&sect0mem, 0, sizeof(struct rio_mem));
+	if(!(sect0mem.virt = dma_alloc_coherent(NULL, RIO_SBLOCK_SIZE,
+					&sect0mem.iores.start, GFP_KERNEL))) {
+		ERR("sect0 memory alloc error!\n");
+		return -ENOMEM;
+	}
+	sect0mem.iores.end = sect0mem.iores.start + RIO_SBLOCK_SIZE - 1;
+	sect0mem.size = RIO_SBLOCK_SIZE;
+
+	if(rio_space_request(mport, RIO_SBLOCK_SIZE, &sect0mem.riores))
+		return -ENOMEM;
+
+	sect0mem.riores.name = "sect 0";
+	sect0 = sect0mem.virt;
+	sect0->id = SA_BITMAP_DRV_ID;
+	sect0->rioid = rio_get_mport_id(mport);
+	sect0->width = rio_addr_size;
+
+	/* map outbond window to access rio inb */
+	rio_map_inb_region(mport, &sect0mem, 0);
+
+	/* Init sblock buffer for block seeking */
+	sblock_buf = rio_prepare_io_mem(mport, NULL, RIO_SBLOCK_SIZE,
+			"sblock_buf");
+	if (!sblock_buf)
+		return -ENOMEM;
+
+	return 0;
+}
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 68e3f68..d39d381 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -23,7 +23,6 @@
 #include <linux/device.h>
 #include <linux/rio_regs.h>
 
-#define RIO_ANY_DESTID		0xff
 #define RIO_NO_HOPCOUNT		-1
 #define RIO_INVALID_DESTID	0xffff
 
@@ -39,11 +38,8 @@
 					   entry is invalid (no route
 					   exists for the device ID) */
 
-#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
-#define RIO_MAX_ROUTE_ENTRIES	(1 << 8)
-#else
-#define RIO_MAX_ROUTE_ENTRIES	(1 << 16)
-#endif
+#define RIO_MAX_ROUTE_ENTRIES(size)	(size ? (1 << 16) : (1 << 8))
+#define RIO_ANY_DESTID(size)		(size ? 0xffff : 0xff)
 
 #define RIO_MAX_MBOX		4
 #define RIO_MAX_MSG_SIZE	0x1000
@@ -69,6 +65,8 @@
 #define RIO_DOORBELL_RESOURCE	0
 #define RIO_INB_MBOX_RESOURCE	1
 #define RIO_OUTB_MBOX_RESOURCE	2
+#define RIO_INB_MEM_RESOURCE	3
+#define RIO_OUTB_MEM_RESOURCE	4
 
 extern struct bus_type rio_bus_type;
 extern struct list_head rio_devices;	/* list of all devices */
@@ -149,6 +147,11 @@ struct rio_dbell {
 	void *dev_id;
 };
 
+enum rio_phy_type {
+	RIO_PHY_PARALLEL,
+	RIO_PHY_SERIAL,
+};
+
 /**
  * struct rio_mport - RIO master port info
  * @dbells: List of doorbell events
@@ -174,9 +177,16 @@ struct rio_mport {
 	struct rio_msg outb_msg[RIO_MAX_MBOX];
 	int host_deviceid;	/* Host device ID */
 	struct rio_ops *ops;	/* maintenance transaction functions */
+	struct rio_mem_ops *mops; /* Memory functions */
 	unsigned char id;	/* port ID, unique among all ports */
 	unsigned char index;	/* port index, unique among all port
 				   interfaces of the same type */
+	unsigned int sys_size;	/* RapidIO common transport system size.
+				 * 0 - Small size. 256 devices.
+				 * 1 - Large size, 65536 devices.
+				 */
+	enum rio_phy_type phy_type; /* RapidIO phy type */
+	void *priv;		/* Master port private data */
 	unsigned char name[40];
 };
 
@@ -211,7 +221,7 @@ struct rio_switch {
 	u16 switchid;
 	u16 hopcount;
 	u16 destid;
-	u8 route_table[RIO_MAX_ROUTE_ENTRIES];
+	u16 *route_table;
 	int (*add_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
 			  u16 table, u16 route_destid, u8 route_port);
 	int (*get_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
@@ -229,18 +239,19 @@ struct rio_switch {
  * @dsend: Callback to send a doorbell message.
  */
 struct rio_ops {
-	int (*lcread) (int index, u32 offset, int len, u32 * data);
-	int (*lcwrite) (int index, u32 offset, int len, u32 data);
-	int (*cread) (int index, u16 destid, u8 hopcount, u32 offset, int len,
+	int (*lcread) (struct rio_mport *, int index, u32 offset, int len, u32 * data);
+	int (*lcwrite) (struct rio_mport *, int index, u32 offset, int len, u32 data);
+	int (*cread) (struct rio_mport *, int index, u16 destid, u8 hopcount, u32 offset, int len,
 		      u32 * data);
-	int (*cwrite) (int index, u16 destid, u8 hopcount, u32 offset, int len,
+	int (*cwrite) (struct rio_mport *, int index, u16 destid, u8 hopcount, u32 offset, int len,
 		       u32 data);
-	int (*dsend) (int index, u16 destid, u16 data);
+	int (*dsend) (struct rio_mport *, int index, u16 destid, u16 data);
 };
 
 #define RIO_RESOURCE_MEM	0x00000100
 #define RIO_RESOURCE_DOORBELL	0x00000200
 #define RIO_RESOURCE_MAILBOX	0x00000400
+#define RIO_RESOURCE_MAINT	0x00000800
 
 #define RIO_RESOURCE_CACHEABLE	0x00010000
 #define RIO_RESOURCE_PCI	0x00020000
@@ -309,6 +320,42 @@ struct rio_route_ops {
 			 u16 table, u16 route_destid, u8 * route_port);
 };
 
+/**
+ * Struct for RIO memory definition.
+ * @node: Node in list of memories
+ * @virt: The virtual address for mapped memory accessing.
+ * @owner: The owner id of this memory.
+ * @size: The size of memory space, it should same to iores and riores.
+ * @iores: The resource of local IO region for mapping.
+ * @riores: The resource of mapped RapidIO space region.
+ */
+struct rio_mem {
+	struct list_head node;
+	void *virt;
+	u32 owner;
+	resource_size_t size;
+	struct resource iores;
+	struct resource riores;
+};
+
+/**
+ * Struct for RIO memory definition.
+ * @map_inb: The function for mapping inbound memory window.
+ * @map_outb: The function for mapping outbound memory window.
+ * @unmap_inb: The function for unmapping inbound memory window.
+ * @unmap_outb: The function for unmapping outbound memory window.
+ */
+struct rio_mem_ops {
+	int (*map_inb) (struct rio_mport *, resource_size_t lstart,
+			resource_size_t rstart,
+			resource_size_t size, u32 flags);
+	int (*map_outb) (struct rio_mport *, resource_size_t lstart,
+			resource_size_t rstart,
+			resource_size_t size, u16 tid, u32 flags);
+	void (*unmap_inb) (struct rio_mport *, resource_size_t lstart);
+	void (*unmap_outb) (struct rio_mport *, resource_size_t lstart);
+};
+
 /* Architecture and hardware-specific functions */
 extern int rio_init_mports(void);
 extern void rio_register_mport(struct rio_mport *);
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
index 7adb2a1..70f778b 100644
--- a/include/linux/rio_drv.h
+++ b/include/linux/rio_drv.h
@@ -334,6 +334,16 @@ static inline void rio_init_dbell_res(struct resource *res, u16 start, u16 end)
 	res->flags = RIO_RESOURCE_DOORBELL;
 }
 
+static inline void rio_init_io_res(struct resource *res, resource_size_t start,
+		resource_size_t end, const char *name, unsigned long flag)
+{
+	memset(res, 0, sizeof(struct resource));
+	res->start = start;
+	res->end = end;
+	res->name = name;
+	res->flags = flag;
+}
+
 /**
  * RIO_DEVICE - macro used to describe a specific RIO device
  * @dev: the 16 bit RIO device ID
@@ -408,13 +418,33 @@ extern int rio_request_inb_dbell(struct rio_mport *, void *, u16, u16,
 extern int rio_release_inb_dbell(struct rio_mport *, u16, u16);
 extern struct resource *rio_request_outb_dbell(struct rio_dev *, u16, u16);
 extern int rio_release_outb_dbell(struct rio_dev *, struct resource *);
+extern struct resource *rio_request_io_region(struct rio_mport *, void *,
+				u32, u32, const char *, unsigned long,
+				struct resource *);
+extern struct rio_mem *rio_prepare_io_mem(struct rio_mport *, struct rio_dev *,
+				resource_size_t, const char *);
 
 /* Memory region management */
-int rio_claim_resource(struct rio_dev *, int);
-int rio_request_regions(struct rio_dev *, char *);
-void rio_release_regions(struct rio_dev *);
-int rio_request_region(struct rio_dev *, int, char *);
-void rio_release_region(struct rio_dev *, int);
+extern struct rio_mem *rio_request_inb_region(struct rio_mport *, void *,
+				resource_size_t, const char *, u32);
+extern struct rio_mem *rio_request_outb_region(struct rio_mport *,
+		void *, resource_size_t, const char *, u32);
+extern int rio_release_inb_region(struct rio_mport *, struct rio_mem *);
+extern int rio_release_outb_region(struct rio_mport *, struct rio_mem *);
+
+/* Memory low-level mapping functions */
+extern int rio_map_inb_region(struct rio_mport *, struct rio_mem *, u32);
+extern int rio_map_outb_region(struct rio_mport *, u16, struct rio_mem *, u32);
+extern void rio_unmap_inb_region(struct rio_mport *, struct rio_mem *);
+extern void rio_unmap_outb_region(struct rio_mport *, struct rio_mem *);
+
+/* Memory Allocator */
+extern int rio_space_request(struct rio_mport *, resource_size_t,
+						struct resource *);
+extern int rio_space_find_mem(struct rio_mport *, u16, u32, struct resource *);
+extern int rio_space_init(struct rio_mport *);
+extern int rio_space_claim(struct rio_mem *);
+extern void rio_space_release(struct rio_mem *);
 
 /* LDM support */
 int rio_register_driver(struct rio_driver *);
@@ -464,6 +494,7 @@ extern u16 rio_local_get_device_id(struct rio_mport *port);
 extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from);
 extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did,
 				   struct rio_dev *from);
+extern u32 rio_get_mport_id(struct rio_mport *);
 
 #endif				/* __KERNEL__ */
 #endif				/* LINUX_RIO_DRV_H */
-- 
1.5.1

Re: [PATCH 5/5 v3] Add the memory management driver to RapidIO.

[Kumar Gala]

On Jul 26, 2007, at 3:42 AM, Zhang Wei wrote:

> This patch adds the memory management driver to RapidIO.
> The RapidIO system size is changed to automatically detection.
> Add the memory mapping driver to RapidIO basic driver.
> Multi master ports are supported.
> Add a simple Bitmap RapidIO space allocator driver.

Can we break up the functionality here into separate patches.  I'm  
seeing 4 logical patches:
* system size is changed to automatic detection
* support for multi master ports
* bitmap allocator
* memory map driver


> Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
> ---
> drivers/net/rionet.c                |   17 +-
> drivers/rapidio/Kconfig             |   18 +-
> drivers/rapidio/Makefile            |    1 +
> drivers/rapidio/rio-access.c        |   10 +-
> drivers/rapidio/rio-scan.c          |   53 +++--
> drivers/rapidio/rio-sysfs.c         |    3 +-
> drivers/rapidio/rio.c               |  479 ++++++++++++++++++++++++++ 
> ++++++++-
> drivers/rapidio/rio.h               |    9 +-
> drivers/rapidio/sallocator/Kconfig  |    9 +
> drivers/rapidio/sallocator/Makefile |   12 +
> drivers/rapidio/sallocator/bitmap.c |  382 ++++++++++++++++++++++++++ 
> ++
> include/linux/rio.h                 |   71 +++++-
> include/linux/rio_drv.h             |   41 +++-
> 13 files changed, 1046 insertions(+), 59 deletions(-)
> create mode 100644 drivers/rapidio/sallocator/Kconfig
> create mode 100644 drivers/rapidio/sallocator/Makefile
> create mode 100644 drivers/rapidio/sallocator/bitmap.c

[snip]

> +config RAPIDIO_PROC_FS
> +	bool "I/O and Memory resource debug"
> +	depends on RAPIDIO && PROC_FS
> +	default y
> +	---help---
> +	  Enable this option, it will create a /proc/riores node for
> +	  monitoring the RapidIO I/O and Memory resource.
> +

This isn't going to be acceptable.  You should use sysfs or debugfs  
not proc.

- k

Re: [PATCH 4/5 v3] Add RapidIO support to powerpc architecture.

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 300 bytes --]

On Thu, 26 Jul 2007 16:42:51 +0800 Zhang Wei <wei.zhang@freescale.com> wrote:
>
> +
> +#include <../sysdev/fsl_rio.h>

This can just be <sysdev/fsl_rio.h> if it is only built on 32bit.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [PATCH 4/5 v3] Add RapidIO support to powerpc architecture.

[Kumar Gala]

On Jul 26, 2007, at 3:42 AM, Zhang Wei wrote:

> This patch adds the RapidIO support to the powerpc architecture.
> Some files are moved from ppc. OF-tree and OF-device supports are  
> added.
> New silicons such as MPC8548, MPC8641 with serial RapidIO  
> controller are
> all supported.
> Memory driver hardware operations are added.
> Global mport variables are changed to master port private variables.
> Multi master ports are supported.
>
> Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
> ---
>  arch/powerpc/Kconfig          |    8 +
>  arch/powerpc/kernel/Makefile  |    1 +
>  arch/powerpc/kernel/rio.c     |   64 ++
>  arch/powerpc/sysdev/Makefile  |    1 +
>  arch/powerpc/sysdev/fsl_rio.c | 1455 ++++++++++++++++++++++++++++++ 
> +++++++++++

how much of this moved from ppc85xx_rio.c?

>  arch/powerpc/sysdev/fsl_rio.h |   20 +
>  6 files changed, 1549 insertions(+), 0 deletions(-)
>  create mode 100644 arch/powerpc/kernel/rio.c
>  create mode 100644 arch/powerpc/sysdev/fsl_rio.c
>  create mode 100644 arch/powerpc/sysdev/fsl_rio.h
>
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 00099ef..45f32f1 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -492,6 +492,14 @@ source "drivers/pci/Kconfig"
>
>  source "drivers/pcmcia/Kconfig"
>
> +config RAPIDIO
> +	bool "RapidIO support" if MPC8540 || MPC8560 || MPC8641 || MPC8548
> +	help
> +	  If you say Y here, the kernel will include drivers and
> +	  infrastructure code to support RapidIO interconnect devices.

why not make this depend on something like HAS_RAPIDIO and let the  
boards select HAS_RAPIDIO if they have it

> +
> +source "drivers/rapidio/Kconfig"
> +
>  source "drivers/pci/hotplug/Kconfig"
>
>  endmenu
> diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/ 
> Makefile
> index 42c42ec..02d4100 100644
> --- a/arch/powerpc/kernel/Makefile
> +++ b/arch/powerpc/kernel/Makefile
> @@ -70,6 +70,7 @@ pci64-$(CONFIG_PPC64)		+= pci_64.o pci_dn.o isa- 
> bridge.o
>  pci32-$(CONFIG_PPC32)		:= pci_32.o
>  obj-$(CONFIG_PCI)		+= $(pci64-y) $(pci32-y) pci-common.o
>  obj-$(CONFIG_PCI_MSI)		+= msi.o
> +obj-$(CONFIG_RAPIDIO)		+= rio.o

should probably live in sysdev/rio.c

>  kexec-$(CONFIG_PPC64)		:= machine_kexec_64.o
>  kexec-$(CONFIG_PPC32)		:= machine_kexec_32.o
>  obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o $(kexec-y)
> diff --git a/arch/powerpc/kernel/rio.c b/arch/powerpc/kernel/rio.c
> new file mode 100644
> index 0000000..8d41e93
> --- /dev/null
> +++ b/arch/powerpc/kernel/rio.c
> @@ -0,0 +1,64 @@
> +/*
> + * RapidIO PowerPC support
> + *
> + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights  
> reserved.
> + * Zhang Wei <wei.zhang@freescale.com>, Jun 2007
> + *
> + * This program is free software; you can redistribute  it and/or  
> modify it
> + * under  the terms of  the GNU General  Public License as  
> published by the
> + * Free Software Foundation;  either version 2 of the  License, or  
> (at your
> + * option) any later version.
> + *
> + * New RapidIO peer-to-peer network initialize with of-device  
> supoort.
> + *
> + */
> +
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/rio.h>
> +
> +#include <asm/rio.h>
> +#include <asm/of_device.h>
> +#include <asm/of_platform.h>
> +
> +#include <../sysdev/fsl_rio.h>
> +
> +
> +/* The probe function for RapidIO peer-to-peer network.
> + */
> +static int __devinit of_rio_rpn_probe(struct of_device *dev,
> +				     const struct of_device_id *match)
> +{
> +	int rc;
> +	printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n",
> +			dev->node->full_name);
> +
> +	rc = fsl_rio_setup(dev);
> +	if (rc)
> +		goto out;
> +
> +	/* Enumerate all registered ports */
> +	rc = rio_init_mports();
> +out:
> +	return rc;
> +};
> +
> +static struct of_device_id of_rio_rpn_ids[] = {
> +	{
> +		.compatible = "fsl,rapidio-delta",
> +	},
> +	{},
> +};
> +
> +static struct of_platform_driver of_rio_rpn_driver = {
> +	.name = "of-rio",
> +	.match_table = of_rio_rpn_ids,
> +	.probe = of_rio_rpn_probe,
> +};
> +
> +static __init int of_rio_rpn_init(void)
> +{
> +	return of_register_platform_driver(&of_rio_rpn_driver);
> +}

RE: [PATCH 4/5 v3] Add RapidIO support to powerpc architecture.

[Zhang Wei-r63237]

Hi, Kumar,=20

> -----Original Message-----
> From: Kumar Gala [mailto:galak@kernel.crashing.org]=20
> On Jul 26, 2007, at 3:42 AM, Zhang Wei wrote:
>=20
> > This patch adds the RapidIO support to the powerpc architecture.
> > Some files are moved from ppc. OF-tree and OF-device supports are =20
> > added.
> > New silicons such as MPC8548, MPC8641 with serial RapidIO =20
> > controller are
> > all supported.
> > Memory driver hardware operations are added.
> > Global mport variables are changed to master port private variables.
> > Multi master ports are supported.
> >
> > Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
> > ---
> >  arch/powerpc/Kconfig          |    8 +
> >  arch/powerpc/kernel/Makefile  |    1 +
> >  arch/powerpc/kernel/rio.c     |   64 ++
> >  arch/powerpc/sysdev/Makefile  |    1 +
> >  arch/powerpc/sysdev/fsl_rio.c | 1455=20
> ++++++++++++++++++++++++++++++=20
> > +++++++++++
>=20
> how much of this moved from ppc85xx_rio.c?

>From the code size, 2/3 are moved from pcc85xx_rio.c with clean up, 1/3
are new coding.

>=20
> >  arch/powerpc/sysdev/fsl_rio.h |   20 +
> >  6 files changed, 1549 insertions(+), 0 deletions(-)
> >  create mode 100644 arch/powerpc/kernel/rio.c
> >  create mode 100644 arch/powerpc/sysdev/fsl_rio.c
> >  create mode 100644 arch/powerpc/sysdev/fsl_rio.h
> >
> > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> > index 00099ef..45f32f1 100644
> > --- a/arch/powerpc/Kconfig
> > +++ b/arch/powerpc/Kconfig
> > @@ -492,6 +492,14 @@ source "drivers/pci/Kconfig"
> >
> >  source "drivers/pcmcia/Kconfig"
> >
> > +config RAPIDIO
> > +	bool "RapidIO support" if MPC8540 || MPC8560 || MPC8641=20
> || MPC8548
> > +	help
> > +	  If you say Y here, the kernel will include drivers and
> > +	  infrastructure code to support RapidIO interconnect devices.
>=20
> why not make this depend on something like HAS_RAPIDIO and let the =20
> boards select HAS_RAPIDIO if they have it

It's more clear, We can know how many and which processors support
RapidIO. :-)

>=20
> > +
> > +source "drivers/rapidio/Kconfig"
> > +
> >  source "drivers/pci/hotplug/Kconfig"
> >
> >  endmenu
> > diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/=20
> > Makefile
> > index 42c42ec..02d4100 100644
> > --- a/arch/powerpc/kernel/Makefile
> > +++ b/arch/powerpc/kernel/Makefile
> > @@ -70,6 +70,7 @@ pci64-$(CONFIG_PPC64)		+=3D=20
> pci_64.o pci_dn.o isa-=20
> > bridge.o
> >  pci32-$(CONFIG_PPC32)		:=3D pci_32.o
> >  obj-$(CONFIG_PCI)		+=3D $(pci64-y) $(pci32-y) pci-common.o
> >  obj-$(CONFIG_PCI_MSI)		+=3D msi.o
> > +obj-$(CONFIG_RAPIDIO)		+=3D rio.o
>=20
> should probably live in sysdev/rio.c

This just keep the same position of ppc arch.

Thanks!
-zw

Re: [PATCH 3/5 v3] Add the platform device support with RapidIO to MPC8641HPCN platform.

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 324 bytes --]

On Thu, 26 Jul 2007 16:42:50 +0800 Zhang Wei <wei.zhang@freescale.com> wrote:
>
> +#include <asm/of_device.h>
> +#include <asm/of_platform.h>

These should now be <linux/of_device.h> and <linux/of_platform.h>

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [PATCH 3/5 v3] Add the platform device support with RapidIO to MPC8641HPCN platform.

[Arnd Bergmann]

On Thursday 26 July 2007, Zhang Wei wrote:
> +
> +static struct of_device_id mpc86xx_of_ids[] =3D {
> +=A0=A0=A0=A0=A0=A0=A0{ .type =3D "soc", },
> +=A0=A0=A0=A0=A0=A0=A0{ .compatible =3D "fsl,rapidio-delta", },
> +=A0=A0=A0=A0=A0=A0=A0{},
> +};

With the device tree source you have posted in 2/5, the rapidio node is
a child of the soc bus, and it doesn't have any children of its own.
Therefore it is completely equivalent to _only_ add the soc type
to mpc86xx_of_ids[], as in=20

static struct of_device_id mpc86xx_of_ids[] =3D {
       { .type =3D "soc", },
       {},
};

Even if you intend to add children to the rapidio node in the future,
I'd think it would be more appropriate to have those scanned by
the rapidio bus driver, not by of_platform.

	Arnd <><

RE: [PATCH 3/5 v3] Add the platform device support with RapidIO to MPC8641HPCN platform.

[Zhang Wei-r63237]

Hi, Arnd,

I can change it as you metioned now.

Thanks!
-zw

> -----Original Message-----
> From: linux-kernel-owner@vger.kernel.org=20
> [mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Arnd Bergmann
> Sent: Sunday, July 29, 2007 9:57 PM
> To: linuxppc-dev@ozlabs.org
> Cc: Zhang Wei-r63237; galak@kernel.crashing.org;=20
> mporter@kernel.crashing.org; paulus@samba.org;=20
> linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 3/5 v3] Add the platform device support=20
> with RapidIO to MPC8641HPCN platform.
>=20
> On Thursday 26 July 2007, Zhang Wei wrote:
> > +
> > +static struct of_device_id mpc86xx_of_ids[] =3D {
> > +=A0=A0=A0=A0=A0=A0=A0{ .type =3D "soc", },
> > +=A0=A0=A0=A0=A0=A0=A0{ .compatible =3D "fsl,rapidio-delta", },
> > +=A0=A0=A0=A0=A0=A0=A0{},
> > +};
>=20
> With the device tree source you have posted in 2/5, the=20
> rapidio node is
> a child of the soc bus, and it doesn't have any children of its own.
> Therefore it is completely equivalent to _only_ add the soc type
> to mpc86xx_of_ids[], as in=20
>=20
> static struct of_device_id mpc86xx_of_ids[] =3D {
>        { .type =3D "soc", },
>        {},
> };
>=20
> Even if you intend to add children to the rapidio node in the future,
> I'd think it would be more appropriate to have those scanned by
> the rapidio bus driver, not by of_platform.
>=20
> 	Arnd <><
>=20
> -
> To unsubscribe from this list: send the line "unsubscribe=20
> linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>=20

Re: [PATCH 1/5 v3] Add the explanation and a sample of RapidIO OF node to the document of booting-without-of.txt file.

[Kumar Gala]

On Jul 26, 2007, at 3:42 AM, Zhang Wei wrote:

> Add the explanation and a sample of RapidIO OF node to the document  
> of booting-without-of.txt file.
>
> Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
> ---
>  Documentation/powerpc/booting-without-of.txt |   37 +++++++++++++++ 
> +++++++++++
>  1 files changed, 37 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/powerpc/booting-without-of.txt b/ 
> Documentation/powerpc/booting-without-of.txt
> index 76733a3..d89b805 100644
> --- a/Documentation/powerpc/booting-without-of.txt
> +++ b/Documentation/powerpc/booting-without-of.txt
> @@ -1824,6 +1824,43 @@ platforms are moved over to use the  
> flattened-device-tree model.
>  		fsl,has-rstcr;
>  	};
>
> +   l) RapidIO
> +
> +   RapidIO is a definition of a system interconnect. This node add
> +   the support for RapidIO processor in kernel. The node name is
> +   suggested to be 'rapidio'.
> +
> +   Required properties:
> +
> +    - compatible : Using "fsl,rapidio-delta" for Freescale PowerPC
> +      RapidIO controller.
> +    - #address-cells : Address representation for "rapidio" devices.
> +      This field represents the number of cells needed to represent
> +      the RapidIO address of the registers.

Can you explain this a little further.  I'm a bit confused by  
'RapidIO address of the registers'.

> +      See 1) above for more details on defining #address-cells.
> +    - reg : Offset and length of the register set for the device
> +    - ranges : Should be defined as specified in 1) to describe the
> +      translation of addresses for memory mapped RapidIO memory
> +      space.
> +    - interrupts : binding interrupts for this device node,
> +      please follow below orders:
> +      <err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
> +      msg2_tx_irq msg2_rx_irq ... msgN_tx_irq msgN_rx_irq>.
> +
> +  Example:
> +
> +	rapidio@c0000 {
> +		compatible = "fsl,rapidio-delta";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		reg = <c0000 20000>;
> +		ranges = <0 0 c0000000 20000000>;
> +		interrupt-parent = <&mpic>;
> +		/* err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
> +						      msg2_tx_irq msg2_rx_irq */
> +		interrupts = <30 2 31 2 32 2 35 2 36 2 37 2 38 2>;
> +	};
> +
>     More devices will be defined as this spec matures.
>
>  VII - Specifying interrupt information for devices
> -- 
> 1.5.1

RE: [PATCH 1/5 v3] Add the explanation and a sample of RapidIO OF node to the document of booting-without-of.txt file.

[Zhang Wei-r63237]

Hi, Kumar,=20
> +   RapidIO is a definition of a system interconnect. This node add
> > +   the support for RapidIO processor in kernel. The node name is
> > +   suggested to be 'rapidio'.
> > +
> > +   Required properties:
> > +
> > +    - compatible : Using "fsl,rapidio-delta" for Freescale PowerPC
> > +      RapidIO controller.
> > +    - #address-cells : Address representation for=20
> "rapidio" devices.
> > +      This field represents the number of cells needed to represent
> > +      the RapidIO address of the registers.
>=20
> Can you explain this a little further.  I'm a bit confused by =20
> 'RapidIO address of the registers'.
>=20
I want to present "This field represents the number of cells [needed to
represent the RapidIO address] of the registers."
Maybe I should remove 'of the registers' to be more clear.

Thanks!
-zw

Re: [PATCH 1/5 v3] Add the explanation and a sample of RapidIO OF node to the document of booting-without-of.txt file.

[Segher Boessenkool]

>>> +    - #address-cells : Address representation for
>> "rapidio" devices.
>>> +      This field represents the number of cells needed to represent
>>> +      the RapidIO address of the registers.
>>
>> Can you explain this a little further.  I'm a bit confused by
>> 'RapidIO address of the registers'.
>>
> I want to present "This field represents the number of cells [needed to
> represent the RapidIO address] of the registers."
> Maybe I should remove 'of the registers' to be more clear.

This is completely content-free anyway; the semantics of
#address-cells (and #size-cells, which you forgot) are
already defined in the base OF spec; what you _should_ be
defining here is a) the required value of #address-cells
for a rapidio bus; and b) how addresses on that bus are
represented (simply as a 64-bit integer, encoded as a
pair of 32-bit integers as usual; but it needs to be said).


Segher

Re: [PATCH 1/5 v3] Add the explanation and a sample of RapidIO OF node to the document of booting-without-of.txt file.

[Segher Boessenkool]

> +   l) RapidIO

"FSL PowerPC bridge RapidIO" or something like that -- you
aren't doing a _generic_ rapidio binding here.

> +   RapidIO is a definition of a system interconnect. This node add
> +   the support for RapidIO processor in kernel. The node name is
> +   suggested to be 'rapidio'.
> +
> +   Required properties:
> +
> +    - compatible : Using "fsl,rapidio-delta" for Freescale PowerPC
> +      RapidIO controller.
> +    - #address-cells : Address representation for "rapidio" devices.
> +      This field represents the number of cells needed to represent
> +      the RapidIO address of the registers.
> +      See 1) above for more details on defining #address-cells.
> +    - reg : Offset and length of the register set for the device
> +    - ranges : Should be defined as specified in 1) to describe the
> +      translation of addresses for memory mapped RapidIO memory
> +      space.
> +    - interrupts : binding interrupts for this device node,
> +      please follow below orders:
> +      <err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
> +      msg2_tx_irq msg2_rx_irq ... msgN_tx_irq msgN_rx_irq>.

_All_ of these are "as specified in 1)".  You should be saying
the specifics for your device here; for example, what register
blocks of your controller are described in "reg", and in what
order?


Segher

Re: [PATCH 0/5 v3] Porting RapidIO driver from ppc to powerpc architecture and adding memory mapped RapidIO driver.

[Kumar Gala]

On Jul 26, 2007, at 3:42 AM, Zhang Wei wrote:

> These patches are the version 3 patches for RapidIO with dts update  
> and some minor fixups.
>
> These patches are used for supporting RapidIO controllers of  
> Freescale. I ported them from ppc architecture to powerpc  
> architecture and added some new features, such as memory mapped  
> driver.
>
> [PATCH 1/5] Add the explanation and sample of RapidIO DTS OF-node  
> to the document of booting-without-of.txt file.
> [PATCH 2/5] Add RapidIO OF-node to MPC8641HPCN board dts file.
> [PATCH 3/5] Add the platform device support with RapidIO to  
> MPC8641HPCN platform.
> [PATCH 4/5] Add RapidIO support to powerpc architecture.
> [PATCH 5/5] Add the memory management driver to RapidIO.
>
> Please see below descriptions of these patches:
> 1. Add the RapidIO driver of-device support.
> 2. Add the RapidIO driver support to MPC8641HPCN board.
> 3. Port the RapidIO from ppc to powerpc architecture.

Can we do the port from ppc as follows:
- cp arch/ppc/syslib/*85xx*rio to arch/powerpc/syslib/fsl_rio.{c,h}  
make everything still build
- rename cleanup the code in fsl_rio.{c,h}

this makes it easier to see what changes actually are to fsl_rio.{c,h}

> 4. Add Memory mapped RapidIO driver.
> 5. Add the support to multi master ports.
> 6. Add a simple bitmap RapidIO space allocator driver.
> 7. Change the RapidIO system size of menuconfig to automatically  
> detection.

also you describe 7 items, was expect 7 patches :)

- k

Re: [PATCH 0/5 v3] Porting RapidIO driver from ppc to powerpc architecture and adding memory mapped RapidIO driver.

[Phil Terry]

Can anyone tell me what the status of these are? What kernel release are
they targetted for? Currently I'm trying to work with 2.6.23 plus these
patches locally.

Cheers
Phil

On Thu, 2007-07-26 at 16:42 +0800, Zhang Wei wrote:
> These patches are the version 3 patches for RapidIO with dts update and some minor fixups.
> 
> These patches are used for supporting RapidIO controllers of Freescale. I ported them from ppc architecture to powerpc architecture and added some new features, such as memory mapped driver.
> 
> [PATCH 1/5] Add the explanation and sample of RapidIO DTS OF-node to the document of booting-without-of.txt file.
> [PATCH 2/5] Add RapidIO OF-node to MPC8641HPCN board dts file.
> [PATCH 3/5] Add the platform device support with RapidIO to MPC8641HPCN platform.
> [PATCH 4/5] Add RapidIO support to powerpc architecture.
> [PATCH 5/5] Add the memory management driver to RapidIO.
> 
> Please see below descriptions of these patches:
> 1. Add the RapidIO driver of-device support.
> 2. Add the RapidIO driver support to MPC8641HPCN board.
> 3. Port the RapidIO from ppc to powerpc architecture.
> 4. Add Memory mapped RapidIO driver.
> 5. Add the support to multi master ports.
> 6. Add a simple bitmap RapidIO space allocator driver.
> 7. Change the RapidIO system size of menuconfig to automatically detection.
> 
> Thanks!
> 
> Best Regards,
> Zhang Wei
> 
> 
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
> 
> 

Re: [PATCH 0/5 v3] Porting RapidIO driver from ppc to powerpc architecture and adding memory mapped RapidIO driver.

[Kumar Gala]

On Oct 29, 2007, at 2:38 PM, Phil Terry wrote:

> Can anyone tell me what the status of these are? What kernel  
> release are
> they targetted for? Currently I'm trying to work with 2.6.23 plus  
> these
> patches locally.

hopefully 2.6.25.  I'd like to get the documentation updates in  
2.6.24 if we have agreement on them.

- k

RE: [PATCH 0/5 v3] Porting RapidIO driver from ppc to powerpc architecture and adding memory mapped RapidIO driver.

[Zhang Wei-r63237]

Yes, I'm working on it. Do not worry about it.

Wei.=20

> -----Original Message-----
> From: Kumar Gala [mailto:galak@kernel.crashing.org]=20
> Sent: Tuesday, October 30, 2007 4:31 AM
> To: pterry@micromemory.com
> Cc: Zhang Wei-r63237; mporter@kernel.crashing.org;=20
> paulus@samba.org; linuxppc-dev@ozlabs.org;=20
> linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 0/5 v3] Porting RapidIO driver from ppc=20
> to powerpc architecture and adding memory mapped RapidIO driver.
>=20
>=20
> On Oct 29, 2007, at 2:38 PM, Phil Terry wrote:
>=20
> > Can anyone tell me what the status of these are? What kernel =20
> > release are
> > they targetted for? Currently I'm trying to work with 2.6.23 plus =20
> > these
> > patches locally.
>=20
> hopefully 2.6.25.  I'd like to get the documentation updates in =20
> 2.6.24 if we have agreement on them.
>=20
> - k
>=20

Re: [PATCH 0/5 v3] Porting RapidIO driver from ppc to powerpc architecture and adding memory mapped RapidIO driver.

[Randy Vinson]

Zhang Wei-r63237 wrote:
> Yes, I'm working on it. Do not worry about it.
How's this going? I've been working on this a bit myself, but if you are
close to posting your stuff, I'll stop and wait for your version
instead. It doesn't make sense for us to duplicate the same work.

Randy Vinson

RE: [PATCH 0/5 v3] Porting RapidIO driver from ppc to powerpc architecture and adding memory mapped RapidIO driver.

[Zhang Wei-r63237]

Hi, Randy,

I'll post it soon and hope to get much feedback from you.

Thanks!
Wei.=20

> -----Original Message-----
> From: Randy Vinson [mailto:rvinson@mvista.com]=20
>=20
> Zhang Wei-r63237 wrote:
> > Yes, I'm working on it. Do not worry about it.
> How's this going? I've been working on this a bit myself, but=20
> if you are
> close to posting your stuff, I'll stop and wait for your version
> instead. It doesn't make sense for us to duplicate the same work.
>=20
> Randy Vinson
>=20