From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Valentine Barshak <vbarshak@ru.mvista.com>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] PowerPC: Add NEW EMAC driver support to 440EPx Sequoia board.
Date: Tue, 16 Oct 2007 07:01:00 +1000 [thread overview]
Message-ID: <1192482060.11795.31.camel@pasglop> (raw)
In-Reply-To: <20071012130305.GA14682@ru.mvista.com>
On Fri, 2007-10-12 at 17:03 +0400, Valentine Barshak wrote:
> This patch enables NEW EMAC support for PowerPC 440EPx Sequoia board
> and adds BCM5248 and Marvell 88E1111 PHY support to NEW EMAC driver.
> These PHY chips are used on PowerPC440EPx boards.
> The PHY code is based on the previous work by Stefan Roese <sr@denx.de>
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>
> ---
> arch/powerpc/platforms/44x/Kconfig | 7 ++----
> drivers/net/ibm_newemac/phy.c | 39 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 42 insertions(+), 4 deletions(-)
>
> --- linux.orig/arch/powerpc/platforms/44x/Kconfig 2007-07-30 15:05:50.000000000 +0400
> +++ linux/arch/powerpc/platforms/44x/Kconfig 2007-07-30 17:59:05.000000000 +0400
> @@ -48,10 +48,9 @@
> config 440EPX
> bool
> select PPC_FPU
> -# Disabled until the new EMAC Driver is merged.
> -# select IBM_NEW_EMAC_EMAC4
> -# select IBM_NEW_EMAC_RGMII
> -# select IBM_NEW_EMAC_ZMII
> + select IBM_NEW_EMAC_EMAC4
> + select IBM_NEW_EMAC_RGMII
> + select IBM_NEW_EMAC_ZMII
>
> config 440GP
> bool
> --- linux.orig/drivers/net/ibm_newemac/phy.c 2007-06-15 21:45:18.000000000 +0400
> +++ linux/drivers/net/ibm_newemac/phy.c 2007-06-15 20:45:15.000000000 +0400
> @@ -306,8 +306,47 @@
> .ops = &cis8201_phy_ops
> };
>
> +static struct mii_phy_def bcm5248_phy_def = {
> +
> + .phy_id = 0x0143bc00,
> + .phy_id_mask = 0x0ffffff0,
> + .name = "BCM5248 10/100 SMII Ethernet",
> + .ops = &generic_phy_ops
> +};
> +
> +static int m88e1111_init(struct mii_phy *phy)
> +{
> + printk("%s: Marvell 88E1111 Ethernet\n", __FUNCTION__);
> + phy_write(phy, 0x14, 0x0ce3);
> + phy_write(phy, 0x18, 0x4101);
> + phy_write(phy, 0x09, 0x0e00);
> + phy_write(phy, 0x04, 0x01e1);
> + phy_write(phy, 0x00, 0x9140);
> + phy_write(phy, 0x00, 0x1140);
> +
> + return 0;
> +}
> +
> +static struct mii_phy_ops m88e1111_phy_ops = {
> + .init = m88e1111_init,
> + .setup_aneg = genmii_setup_aneg,
> + .setup_forced = genmii_setup_forced,
> + .poll_link = genmii_poll_link,
> + .read_link = genmii_read_link
> +};
> +
> +static struct mii_phy_def m88e1111_phy_def = {
> +
> + .phy_id = 0x01410CC0,
> + .phy_id_mask = 0x0ffffff0,
> + .name = "Marvell 88E1111 Ethernet",
> + .ops = &m88e1111_phy_ops,
> +};
> +
> static struct mii_phy_def *mii_phy_table[] = {
> &cis8201_phy_def,
> + &bcm5248_phy_def,
> + &m88e1111_phy_def,
> &genmii_phy_def,
> NULL
> };
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
prev parent reply other threads:[~2007-10-15 21:01 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-12 13:03 [PATCH] PowerPC: Add NEW EMAC driver support to 440EPx Sequoia board Valentine Barshak
2007-10-12 13:07 ` Valentine Barshak
2007-10-12 14:39 ` Josh Boyer
2007-10-15 17:26 ` Josh Boyer
2007-10-15 17:57 ` [PATCH] PowerPC: Add BCM5248 and Marvell 88E1111 PHY support to NEW EMAC Valentine Barshak
2007-10-15 18:27 ` Jeff Garzik
2007-10-15 18:48 ` Josh Boyer
2007-10-15 18:53 ` Jeff Garzik
2007-10-15 18:59 ` Josh Boyer
2007-10-15 19:04 ` Jeff Garzik
2007-10-15 21:05 ` Benjamin Herrenschmidt
2007-10-15 22:47 ` Josh Boyer
2007-10-15 21:02 ` Benjamin Herrenschmidt
2007-10-23 15:20 ` Josh Boyer
2007-10-23 16:13 ` Kumar Gala
2007-10-23 16:17 ` Josh Boyer
2007-10-24 3:31 ` Benjamin Herrenschmidt
2007-10-24 19:24 ` Valentine Barshak
2007-10-15 17:58 ` [PATCH] PowerPC: Enable NEW EMAC support for Sequoia 440EPx Valentine Barshak
2007-10-15 20:59 ` [PATCH] PowerPC: Add NEW EMAC driver support to 440EPx Sequoia board Benjamin Herrenschmidt
2007-10-15 21:01 ` Benjamin Herrenschmidt [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1192482060.11795.31.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=vbarshak@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).