From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Joe Perches To: linux-kernel@vger.kernel.org Subject: [PATCH] drivers/net/: Spelling fixes Date: Mon, 17 Dec 2007 11:40:08 -0800 Message-Id: <1197920439-5455-2-git-send-email-joe@perches.com> Message-Id: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918891.git.joe@perches.com> Cc: Pavel Roskin , David Gibson , orinoco-devel@lists.sourceforge.net, Yi Zhu , Jaroslav Kysela , linuxppc-dev@ozlabs.org, netdev@vger.kernel.org, Paul Mackerras , Peter De Shrijver , Rastapur Santosh , bonding-devel@lists.sourceforge.net, Andy Gospodarek , "Amit S. Kale" , ipw2100-devel@lists.sourceforge.net, ipw3945-devel@lists.sourceforge.net, libertas-dev@lists.infradead.org, Dan Williams , Jesse Brandeburg , Manish Lachwani , Jean Tourrilhes , Jeff Kirsher , Arnaldo Carvalho de Melo , Francois Romieu , Daniel Drake , Li Yang , Jeff Garzik , Jeb Cramer , Chad Tindel , orinoco-users@lists.sourceforge.net, Jay Cliburn , Samuel Ortiz , Sivakumar Subramani , Jesse Huang , Mike Phillips , rt2400-devel@lists.sourceforge.net, Ulrich Kunitz , Chris Snook , cbe-oss-dev@ozlabs.org, Alexander Indenbaum , Adam Fritzler , Auke Kok , Stefano Brivio , Haavard Skinnemoen , tulip-users@lists.sourceforge.net, linux-ppp@vger.kernel.org, Ramkrishna Vepa , linux-wireless@vger.kernel.org, Corey Thomas , Sreenivasa Honnur , e1000-devel@lists.sourceforge.net, John Ronciak , atl1-devel@lists.sourceforge.net, Ron Mercer , James Ketrenos , Andrew Morton , Sorbica Shieh , Larry Finger List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Signed-off-by: Joe Perches --- drivers/net/82596.c | 2 +- drivers/net/amd8111e.c | 8 ++++---- drivers/net/amd8111e.h | 2 +- drivers/net/appletalk/ltpc.c | 2 +- drivers/net/atl1/atl1_hw.c | 2 +- drivers/net/atl1/atl1_main.c | 2 +- drivers/net/bonding/bond_3ad.c | 4 ++-- drivers/net/chelsio/sge.c | 2 +- drivers/net/chelsio/subr.c | 2 +- drivers/net/cxgb3/t3_hw.c | 2 +- drivers/net/e1000/e1000_hw.c | 4 ++-- drivers/net/e1000/e1000_hw.h | 2 +- drivers/net/e1000/e1000_main.c | 2 +- drivers/net/e1000e/netdev.c | 2 +- drivers/net/eepro.c | 2 +- drivers/net/ehea/ehea.h | 2 +- drivers/net/forcedeth.c | 2 +- drivers/net/hamachi.c | 4 ++-- drivers/net/hp100.c | 2 +- drivers/net/hp100.h | 4 ++-- drivers/net/ibm_emac/ibm_emac.h | 2 +- drivers/net/ibm_newemac/emac.h | 2 +- drivers/net/ibmlana.c | 2 +- drivers/net/ibmlana.h | 2 +- drivers/net/ipg.c | 4 ++-- drivers/net/irda/ali-ircc.c | 6 +++--- drivers/net/irda/ali-ircc.h | 4 ++-- drivers/net/irda/donauboe.h | 2 +- drivers/net/irda/irport.c | 4 ++-- drivers/net/irda/nsc-ircc.h | 4 ++-- drivers/net/irda/smsc-ircc2.c | 4 ++-- drivers/net/irda/via-ircc.h | 4 ++-- drivers/net/ixgbe/ixgbe_common.c | 4 ++-- drivers/net/ixgbe/ixgbe_main.c | 2 +- drivers/net/lasi_82596.c | 2 +- drivers/net/lib82596.c | 2 +- drivers/net/macb.c | 2 +- drivers/net/meth.h | 2 +- drivers/net/mv643xx_eth.c | 4 ++-- drivers/net/netxen/netxen_nic_hw.h | 2 +- drivers/net/ppp_generic.c | 2 +- drivers/net/ps3_gelic_net.c | 2 +- drivers/net/qla3xxx.c | 2 +- drivers/net/s2io.h | 2 +- drivers/net/sis190.c | 2 +- drivers/net/sk98lin/skgepnmi.c | 2 +- drivers/net/sk98lin/skxmac2.c | 4 ++-- drivers/net/skfp/ess.c | 2 +- drivers/net/skfp/fplustm.c | 6 +++--- drivers/net/skfp/h/fplustm.h | 4 ++-- drivers/net/skfp/h/smt.h | 2 +- drivers/net/skfp/h/supern_2.h | 2 +- drivers/net/smc911x.c | 2 +- drivers/net/spider_net.c | 2 +- drivers/net/sunbmac.h | 2 +- drivers/net/sungem.c | 2 +- drivers/net/sunhme.h | 2 +- drivers/net/tc35815.c | 4 ++-- drivers/net/tehuti.c | 2 +- drivers/net/tehuti.h | 2 +- drivers/net/tokenring/3c359.c | 2 +- drivers/net/tokenring/lanstreamer.c | 2 +- drivers/net/tokenring/olympic.c | 2 +- drivers/net/tokenring/smctr.c | 6 +++--- drivers/net/tokenring/tms380tr.c | 2 +- drivers/net/tokenring/tms380tr.h | 2 +- drivers/net/tulip/xircom_cb.c | 2 +- drivers/net/tun.c | 4 ++-- drivers/net/ucc_geth_ethtool.c | 2 +- drivers/net/ucc_geth_mii.c | 6 +++--- drivers/net/wan/cycx_drv.c | 4 ++-- drivers/net/wan/sbni.c | 2 +- drivers/net/wireless/atmel.c | 2 +- drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h | 2 +- drivers/net/wireless/ipw2200.c | 2 +- drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +- drivers/net/wireless/libertas/cmd.c | 4 ++-- drivers/net/wireless/libertas/scan.c | 4 ++-- drivers/net/wireless/netwave_cs.c | 2 +- drivers/net/wireless/orinoco.h | 2 +- drivers/net/wireless/ray_cs.c | 2 +- drivers/net/wireless/rt2x00/rt2x00reg.h | 2 +- drivers/net/wireless/rt2x00/rt2x00usb.h | 6 +++--- drivers/net/wireless/rt2x00/rt73usb.c | 2 +- drivers/net/wireless/wavelan_cs.c | 2 +- drivers/net/wireless/zd1211rw/zd_chip.h | 4 ++-- drivers/net/yellowfin.c | 2 +- 87 files changed, 120 insertions(+), 120 deletions(-) diff --git a/drivers/net/82596.c b/drivers/net/82596.c index 2797da7..d999b63 100644 --- a/drivers/net/82596.c +++ b/drivers/net/82596.c @@ -19,7 +19,7 @@ TBD: * look at deferring rx frames rather than discarding (as per tulip) * handle tx ring full as per tulip - * performace test to tune rx_copybreak + * performance test to tune rx_copybreak Most of my modifications relate to the braindead big-endian implementation by Intel. When the i596 is operating in diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index e7fdd81..5cefe92 100644 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -1283,7 +1283,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id) #ifdef CONFIG_AMD8111E_NAPI if(intr0 & RINT0){ if(netif_rx_schedule_prep(dev, &lp->napi)){ - /* Disable receive interupts */ + /* Disable receive interrupts */ writel(RINTEN0, mmio + INTEN0); /* Schedule a polling routine */ __netif_rx_schedule(dev, &lp->napi); @@ -1493,7 +1493,7 @@ static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf) /* -This function sets promiscuos mode, all-multi mode or the multicast address +This function sets promiscuous mode, all-multi mode or the multicast address list to the device. */ static void amd8111e_set_multicast_list(struct net_device *dev) @@ -1522,7 +1522,7 @@ static void amd8111e_set_multicast_list(struct net_device *dev) lp->mc_list = NULL; lp->options &= ~OPTION_MULTICAST_ENABLE; amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF); - /* disable promiscous mode */ + /* disable promiscuous mode */ writel(PROM, lp->mmio + CMD2); return; } @@ -2016,7 +2016,7 @@ static int __devinit amd8111e_probe_one(struct pci_dev *pdev, for(i = 0; i < ETH_ADDR_LEN; i++) dev->dev_addr[i] = readb(lp->mmio + PADR + i); - /* Setting user defined parametrs */ + /* Setting user defined parameters */ lp->ext_phy_option = speed_duplex[card_idx]; if(coalesce[card_idx]) lp->options |= OPTION_INTR_COAL_ENABLE; diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h index 28c60a7..7d288de 100644 --- a/drivers/net/amd8111e.h +++ b/drivers/net/amd8111e.h @@ -614,7 +614,7 @@ typedef enum { #define CSTATE 1 #define SSTATE 2 -/* Assume contoller gets data 10 times the maximum processing time */ +/* Assume controller gets data 10 times the maximum processing time */ #define REPEAT_CNT 10 /* amd8111e decriptor flag definitions */ diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index 6ab2c2d..86a9496 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -1233,7 +1233,7 @@ static int __init ltpc_setup(char *str) if (ints[0] > 2) { dma = ints[3]; } - /* ignore any other paramters */ + /* ignore any other parameters */ } return 1; } diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c index 9d3bd22..82359f7 100644 --- a/drivers/net/atl1/atl1_hw.c +++ b/drivers/net/atl1/atl1_hw.c @@ -645,7 +645,7 @@ s32 atl1_init_hw(struct atl1_hw *hw) atl1_init_flash_opcode(hw); if (!hw->phy_configured) { - /* enable GPHY LinkChange Interrrupt */ + /* enable GPHY LinkChange Interrupt */ ret_val = atl1_write_phy_reg(hw, 18, 0xC00); if (ret_val) return ret_val; diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c index 35b0a7d..7599163 100644 --- a/drivers/net/atl1/atl1_main.c +++ b/drivers/net/atl1/atl1_main.c @@ -575,7 +575,7 @@ static u32 atl1_check_link(struct atl1_adapter *adapter) return ATL1_SUCCESS; } - /* change orignal link status */ + /* change original link status */ if (netif_carrier_ok(netdev)) { adapter->link_speed = SPEED_0; netif_carrier_off(netdev); diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index cb3c6fa..96f0f24 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -869,7 +869,7 @@ static int ad_lacpdu_send(struct port *port) lacpdu_header = (struct lacpdu_header *)skb_put(skb, length); lacpdu_header->ad_header.destination_address = lacpdu_multicast_address; - /* Note: source addres is set to be the member's PERMANENT address, because we use it + /* Note: source address is set to be the member's PERMANENT address, because we use it to identify loopback lacpdus in receive. */ lacpdu_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr)); lacpdu_header->ad_header.length_type = PKT_TYPE_LACPDU; @@ -912,7 +912,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker) marker_header = (struct bond_marker_header *)skb_put(skb, length); marker_header->ad_header.destination_address = lacpdu_multicast_address; - /* Note: source addres is set to be the member's PERMANENT address, because we use it + /* Note: source address is set to be the member's PERMANENT address, because we use it to identify loopback MARKERs in receive. */ marker_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr)); marker_header->ad_header.length_type = PKT_TYPE_LACPDU; diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index b301c04..ed17cd9 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -248,7 +248,7 @@ static void restart_sched(unsigned long); * * Interrupts are handled by a single CPU and it is likely that on a MP system * the application is migrated to another CPU. In that scenario, we try to - * seperate the RX(in irq context) and TX state in order to decrease memory + * separate the RX(in irq context) and TX state in order to decrease memory * contention. */ struct sge { diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c index dc50151..7c95578 100644 --- a/drivers/net/chelsio/subr.c +++ b/drivers/net/chelsio/subr.c @@ -559,7 +559,7 @@ struct chelsio_vpd_t { #define EEPROM_MAX_POLL 4 /* - * Read SEEPROM. A zero is written to the flag register when the addres is + * Read SEEPROM. A zero is written to the flag register when the address is * written to the Control register. The hardware device will set the flag to a * one when 4B have been transferred to the Data register. */ diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 522834c..2882e36 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -534,7 +534,7 @@ struct t3_vpd { * * Read a 32-bit word from a location in VPD EEPROM using the card's PCI * VPD ROM capability. A zero is written to the flag bit when the - * addres is written to the control register. The hardware device will + * address is written to the control register. The hardware device will * set the flag to 1 when 4 bytes have been read into the data register. */ int t3_seeprom_read(struct adapter *adapter, u32 addr, u32 *data) diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 7c6888c..fd7e6a8 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -803,7 +803,7 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw) E1000_WRITE_REG(hw, CTRL, reg_ctrl); break; case e1000_80003es2lan: - /* improve small packet performace for fiber/serdes */ + /* improve small packet performance for fiber/serdes */ if ((hw->media_type == e1000_media_type_fiber) || (hw->media_type == e1000_media_type_internal_serdes)) { reg_tarc0 &= ~(1 << 20); @@ -5001,7 +5001,7 @@ e1000_read_eeprom(struct e1000_hw *hw, return -E1000_ERR_EEPROM; } - /* Eerd register EEPROM access requires no eeprom aquire/release */ + /* Eerd register EEPROM access requires no eeprom acquire/release */ if (eeprom->use_eerd == TRUE) return e1000_read_eeprom_eerd(hw, offset, words, data); diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index a2a86c5..e40e515 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -1068,7 +1068,7 @@ struct e1000_ffvt_entry { #define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */ #define E1000_MDPHYA 0x0003C /* PHY address - RW */ -#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */ +#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ #define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */ #define E1000_GCR 0x05B00 /* PCI-Ex Control */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 4f37506..24a2fc1 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -235,7 +235,7 @@ static struct pci_driver e1000_driver = { .probe = e1000_probe, .remove = __devexit_p(e1000_remove), #ifdef CONFIG_PM - /* Power Managment Hooks */ + /* Power Management Hooks */ .suspend = e1000_suspend, .resume = e1000_resume, #endif diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 4fd2e23..febe157 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4109,7 +4109,7 @@ static struct pci_driver e1000_driver = { .probe = e1000_probe, .remove = __devexit_p(e1000_remove), #ifdef CONFIG_PM - /* Power Managment Hooks */ + /* Power Management Hooks */ .suspend = e1000_suspend, .resume = e1000_resume, #endif diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c index 83bda6c..d3789c5 100644 --- a/drivers/net/eepro.c +++ b/drivers/net/eepro.c @@ -1764,7 +1764,7 @@ module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param_array(mem, int, NULL, 0); module_param(autodetect, int, 0); -MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)"); +MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)"); MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)"); MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)"); MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)"); diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 5f82a46..a50b238 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -251,7 +251,7 @@ struct ehea_qp_init_attr { }; /* - * Event Queue attributes, passed as paramter + * Event Queue attributes, passed as parameter */ struct ehea_eq_attr { u32 type; diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index a96583c..7119332 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -490,7 +490,7 @@ union ring_type { #define NV_RX3_VLAN_TAG_PRESENT (1<<16) #define NV_RX3_VLAN_TAG_MASK (0x0000FFFF) -/* Miscelaneous hardware related defines: */ +/* Miscellaneous hardware related defines: */ #define NV_PCI_REGSZ_VER1 0x270 #define NV_PCI_REGSZ_VER2 0x2d4 #define NV_PCI_REGSZ_VER3 0x604 diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index ed407c8..683b289 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -86,7 +86,7 @@ static int force32; static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; /* The Hamachi chipset supports 3 parameters each for Rx and Tx - * interruput management. Parameters will be loaded as specified into + * interrupt management. Parameters will be loaded as specified into * the TxIntControl and RxIntControl registers. * * The registers are arranged as follows: @@ -811,7 +811,7 @@ static int __devinit read_eeprom(void __iomem *ioaddr, int location) return readb(ioaddr + EEData); } -/* MII Managemen Data I/O accesses. +/* MII Management Data I/O accesses. These routines assume the MDIO controller is idle, and do not exit until the command is finished. */ diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index 49421d1..8b90d64 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -2643,7 +2643,7 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin) } else { hp100_andb(~HP100_PROM_MODE, VG_LAN_CFG_2); /* For ETR parts we need to reset the prom. bit in the training - * register, otherwise promiscious mode won't be disabled. + * register, otherwise promiscuous mode won't be disabled. */ if (lp->chip == HP100_CHIPID_LASSEN) { hp100_andw(~HP100_MACRQ_PROMSC, TRAIN_REQUEST); diff --git a/drivers/net/hp100.h b/drivers/net/hp100.h index e6ca128..e74e45d 100644 --- a/drivers/net/hp100.h +++ b/drivers/net/hp100.h @@ -476,7 +476,7 @@ #define HP100_MACRQ_REPEATER 0x0001 /* 1: MAC tells HUB it wants to be * a cascaded repeater * 0: ... wants to be a DTE */ -#define HP100_MACRQ_PROMSC 0x0006 /* 2 bits: Promiscious mode +#define HP100_MACRQ_PROMSC 0x0006 /* 2 bits: Promiscuous mode * 00: Rcv only unicast packets * specifically addr to this * endnode @@ -488,7 +488,7 @@ #define HP100_CARD_MACVER 0xe000 /* R: 3 bit Cards 100VG MAC version */ #define HP100_MALLOW_REPEATER 0x0001 /* If reset, requested access as an * end node is allowed */ -#define HP100_MALLOW_PROMSC 0x0004 /* 2 bits: Promiscious mode +#define HP100_MALLOW_PROMSC 0x0004 /* 2 bits: Promiscuous mode * 00: Rcv only unicast packets * specifically addr to this * endnode diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h index 97ed22b..655be50 100644 --- a/drivers/net/ibm_emac/ibm_emac.h +++ b/drivers/net/ibm_emac/ibm_emac.h @@ -1,7 +1,7 @@ /* * drivers/net/ibm_emac/ibm_emac.h * - * Register definitions for PowerPC 4xx on-chip ethernet contoller + * Register definitions for PowerPC 4xx on-chip ethernet controller * * Copyright (c) 2004, 2005 Zultys Technologies. * Eugene Surovegin or diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h index 91cb096..49a540a 100644 --- a/drivers/net/ibm_newemac/emac.h +++ b/drivers/net/ibm_newemac/emac.h @@ -1,7 +1,7 @@ /* * drivers/net/ibm_newemac/emac.h * - * Register definitions for PowerPC 4xx on-chip ethernet contoller + * Register definitions for PowerPC 4xx on-chip ethernet controller * * Copyright 2007 Benjamin Herrenschmidt, IBM Corp. * diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c index 91d83ac..5a9b6fa 100644 --- a/drivers/net/ibmlana.c +++ b/drivers/net/ibmlana.c @@ -481,7 +481,7 @@ static void InitBoard(struct net_device *dev) if ((dev->flags & IFF_ALLMULTI) || (mcptr != NULL)) rcrval |= RCREG_AMC; - /* promiscous mode ? */ + /* promiscuous mode ? */ if (dev->flags & IFF_PROMISC) rcrval |= RCREG_PRO; diff --git a/drivers/net/ibmlana.h b/drivers/net/ibmlana.h index aa3ddbd..654af95 100644 --- a/drivers/net/ibmlana.h +++ b/drivers/net/ibmlana.h @@ -90,7 +90,7 @@ typedef struct { #define RCREG_ERR 0x8000 /* accept damaged and collided pkts */ #define RCREG_RNT 0x4000 /* accept packets that are < 64 */ #define RCREG_BRD 0x2000 /* accept broadcasts */ -#define RCREG_PRO 0x1000 /* promiscous mode */ +#define RCREG_PRO 0x1000 /* promiscuous mode */ #define RCREG_AMC 0x0800 /* accept all multicasts */ #define RCREG_LB_NONE 0x0000 /* no loopback */ #define RCREG_LB_MAC 0x0200 /* MAC loopback */ diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c index dbd23bb..27d12eb 100644 --- a/drivers/net/ipg.c +++ b/drivers/net/ipg.c @@ -209,7 +209,7 @@ static int mdio_read(struct net_device * dev, int phy_id, int phy_reg) { void __iomem *ioaddr = ipg_ioaddr(dev); /* - * The GMII mangement frame structure for a read is as follows: + * The GMII management frame structure for a read is as follows: * * |Preamble|st|op|phyad|regad|ta| data |idle| * |< 32 1s>|01|10|AAAAA|RRRRR|z0|DDDDDDDDDDDDDDDD|z | @@ -300,7 +300,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int phy_reg, int val) { void __iomem *ioaddr = ipg_ioaddr(dev); /* - * The GMII mangement frame structure for a read is as follows: + * The GMII management frame structure for a read is as follows: * * |Preamble|st|op|phyad|regad|ta| data |idle| * |< 32 1s>|01|10|AAAAA|RRRRR|z0|DDDDDDDDDDDDDDDD|z | diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 9f58452..94140f7 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -977,7 +977,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) /* Install FIR xmit handler*/ dev->hard_start_xmit = ali_ircc_fir_hard_xmit; - /* Enable Interuupt */ + /* Enable Interrupt */ self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM /* Be ready for incomming frames */ @@ -1096,7 +1096,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) outb(lcr, iobase+UART_LCR); /* Set 8N1 */ outb(fcr, iobase+UART_FCR); /* Enable FIFO's */ - /* without this, the conection will be broken after come back from FIR speed, + /* without this, the connection will be broken after come back from FIR speed, but with this, the SIR connection is harder to established */ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR); @@ -1359,7 +1359,7 @@ static int ali_ircc_net_open(struct net_device *dev) return -EAGAIN; } - /* Turn on interrups */ + /* Turn on interrupts */ outb(UART_IER_RDI , iobase+UART_IER); /* Ready to play! */ diff --git a/drivers/net/irda/ali-ircc.h b/drivers/net/irda/ali-ircc.h index e489c66..0787657 100644 --- a/drivers/net/irda/ali-ircc.h +++ b/drivers/net/irda/ali-ircc.h @@ -173,13 +173,13 @@ struct st_fifo { struct frame_cb { void *start; /* Start of frame in DMA mem */ - int len; /* Lenght of frame in DMA mem */ + int len; /* Length of frame in DMA mem */ }; struct tx_fifo { struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */ int ptr; /* Currently being sent */ - int len; /* Lenght of queue */ + int len; /* Length of queue */ int free; /* Next free slot */ void *tail; /* Next free start in DMA mem */ }; diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h index 1e67720..9db3cce 100644 --- a/drivers/net/irda/donauboe.h +++ b/drivers/net/irda/donauboe.h @@ -30,7 +30,7 @@ * or the type-DO IR port. * * IrDA chip set list from Toshiba Computer Engineering Corp. - * model method maker controler Version + * model method maker controller Version * Portege 320CT FIR,SIR Toshiba Oboe(Triangle) * Portege 3010CT FIR,SIR Toshiba Oboe(Sydney) * Portege 3015CT FIR,SIR Toshiba Oboe(Sydney) diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c index c79caa5..2b2a955 100644 --- a/drivers/net/irda/irport.c +++ b/drivers/net/irda/irport.c @@ -276,7 +276,7 @@ static void irport_start(struct irport_cb *self) outb(UART_LCR_WLEN8, iobase+UART_LCR); /* Reset DLAB */ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR); - /* Turn on interrups */ + /* Turn on interrupts */ outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, iobase+UART_IER); } @@ -352,7 +352,7 @@ static void irport_change_speed(void *priv, __u32 speed) outb(lcr, iobase+UART_LCR); /* Set 8N1 */ outb(fcr, iobase+UART_FCR); /* Enable FIFO's */ - /* Turn on interrups */ + /* Turn on interrupts */ /* This will generate a fatal interrupt storm. * People calling us will do that properly - Jean II */ //outb(/*UART_IER_RLSI|*/UART_IER_RDI/*|UART_IER_THRI*/, iobase+UART_IER); diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h index bbdc97f..29398a4 100644 --- a/drivers/net/irda/nsc-ircc.h +++ b/drivers/net/irda/nsc-ircc.h @@ -231,13 +231,13 @@ struct st_fifo { struct frame_cb { void *start; /* Start of frame in DMA mem */ - int len; /* Lenght of frame in DMA mem */ + int len; /* Length of frame in DMA mem */ }; struct tx_fifo { struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */ int ptr; /* Currently being sent */ - int len; /* Lenght of queue */ + int len; /* Length of queue */ int free; /* Next free slot */ void *tail; /* Next free start in DMA mem */ }; diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 7e7b582..7fd9a48 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -1165,7 +1165,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed) outb(lcr, iobase + UART_LCR); /* Set 8N1 */ outb(fcr, iobase + UART_FCR); /* Enable FIFO's */ - /* Turn on interrups */ + /* Turn on interrupts */ outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed); @@ -1930,7 +1930,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self) outb(UART_LCR_WLEN8, sir_base + UART_LCR); /* Reset DLAB */ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR); - /* Turn on interrups */ + /* Turn on interrupts */ outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER); IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__); diff --git a/drivers/net/irda/via-ircc.h b/drivers/net/irda/via-ircc.h index 204b1b3..9d012f0 100644 --- a/drivers/net/irda/via-ircc.h +++ b/drivers/net/irda/via-ircc.h @@ -54,13 +54,13 @@ struct st_fifo { struct frame_cb { void *start; /* Start of frame in DMA mem */ - int len; /* Lenght of frame in DMA mem */ + int len; /* Length of frame in DMA mem */ }; struct tx_fifo { struct frame_cb queue[MAX_TX_WINDOW + 2]; /* Info about frames in queue */ int ptr; /* Currently being sent */ - int len; /* Lenght of queue */ + int len; /* Length of queue */ int free; /* Next free slot */ void *tail; /* Next free start in DMA mem */ }; diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 512e3b2..4b6359e 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -716,7 +716,7 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) * bit-vector to set in the multicast table. The hardware uses 12 bits, from * incoming rx multicast addresses, to determine the bit-vector to check in * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set - * by the MO field of the MCSTCTRL. The MO field is set during initalization + * by the MO field of the MCSTCTRL. The MO field is set during initialization * to mc_filter_type. **/ static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) @@ -1066,7 +1066,7 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) /** - * ixgbe_acquire_swfw_sync - Aquire SWFW semaphore + * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore * @hw: pointer to hardware structure * @mask: Mask to specify wich semaphore to acquire * diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 00bc525..25a9cc2 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -592,7 +592,7 @@ quit_polling: * ixgbe_setup_msix - Initialize MSI-X interrupts * * ixgbe_setup_msix allocates MSI-X vectors and requests - * interrutps from the kernel. + * interrupts from the kernel. **/ static int ixgbe_setup_msix(struct ixgbe_adapter *adapter) { diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c index efbae4b..1ba38c2 100644 --- a/drivers/net/lasi_82596.c +++ b/drivers/net/lasi_82596.c @@ -47,7 +47,7 @@ TBD: * look at deferring rx frames rather than discarding (as per tulip) * handle tx ring full as per tulip - * performace test to tune rx_copybreak + * performance test to tune rx_copybreak Most of my modifications relate to the braindead big-endian implementation by Intel. When the i596 is operating in diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c index b59f442..c335d31 100644 --- a/drivers/net/lib82596.c +++ b/drivers/net/lib82596.c @@ -47,7 +47,7 @@ TBD: * look at deferring rx frames rather than discarding (as per tulip) * handle tx ring full as per tulip - * performace test to tune rx_copybreak + * performance test to tune rx_copybreak Most of my modifications relate to the braindead big-endian implementation by Intel. When the i596 is operating in diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 047ea7b..1367178 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -239,7 +239,7 @@ static int macb_mii_init(struct macb *bp) struct eth_platform_data *pdata; int err = -ENXIO, i; - /* Enable managment port */ + /* Enable management port */ macb_writel(bp, NCR, MACB_BIT(MPE)); bp->mii_bus.name = "MACB_mii_bus", diff --git a/drivers/net/meth.h b/drivers/net/meth.h index a78dc1c..ecd0e97 100644 --- a/drivers/net/meth.h +++ b/drivers/net/meth.h @@ -127,7 +127,7 @@ typedef struct rx_packet { #define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */ #define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */ #define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */ -#define METH_PROMISC 0x60 /* 11: Promiscious mode */ +#define METH_PROMISC 0x60 /* 11: Promiscuous mode */ #define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */ diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 651c269..c263c91 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -535,7 +535,7 @@ struct mv643xx_private { int rx_resource_err; /* Rx ring resource error flag */ - /* Tx/Rx rings managment indexes fields. For driver use */ + /* Tx/Rx rings management indexes fields. For driver use */ /* Next available and first returning Rx resource */ int rx_curr_desc_q, rx_used_desc_q; @@ -757,7 +757,7 @@ static void mv643xx_eth_update_mac_address(struct net_device *dev) /* * mv643xx_eth_set_rx_mode * - * Change from promiscuos to regular rx mode + * Change from promiscuous to regular rx mode * * Input : pointer to ethernet interface network device structure * Output : N/A diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h index 245bf13..236160a 100644 --- a/drivers/net/netxen/netxen_nic_hw.h +++ b/drivers/net/netxen/netxen_nic_hw.h @@ -429,7 +429,7 @@ typedef enum { #define netxen_get_niu_enable_ge(config_word) \ _netxen_crb_get_bit(config_word, 1) -/* Promiscous mode options (GbE mode only) */ +/* Promiscuous mode options (GbE mode only) */ typedef enum { NETXEN_NIU_PROMISC_MODE = 0, NETXEN_NIU_NON_PROMISC_MODE diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 4f69037..9e1890f 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -2368,7 +2368,7 @@ find_compressor(int type) } /* - * Miscelleneous stuff. + * Miscellaneous stuff. */ static void diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c index 0a42bf5..5efc5b4 100644 --- a/drivers/net/ps3_gelic_net.c +++ b/drivers/net/ps3_gelic_net.c @@ -1271,7 +1271,7 @@ static struct ethtool_ops gelic_net_ethtool_ops = { /** * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout * function (to be called not under interrupt status) - * @work: work is context of tx timout task + * @work: work is context of tx timeout task * * called as task when tx hangs, resets interface (if interface is up) */ diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index a579111..da85b7f 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -3691,7 +3691,7 @@ static int ql_adapter_up(struct ql3_adapter *qdev) ql_sem_unlock(qdev, QL_DRVR_SEM_MASK); } else { printk(KERN_ERR PFX - "%s: Could not aquire driver lock.\n", + "%s: Could not acquire driver lock.\n", ndev->name); goto err_lock; } diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index cc1797a..63d45d4 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -740,7 +740,7 @@ struct mac_info { u16 mc_pause_threshold_q0q3; u16 mc_pause_threshold_q4q7; - void *stats_mem; /* orignal pointer to allocated mem */ + void *stats_mem; /* original pointer to allocated mem */ dma_addr_t stats_mem_phy; /* Physical address of the stat block */ u32 stats_mem_sz; struct stat_block *stats_info; /* Logical address of the stat block */ diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 7200883..ff559e4 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -102,7 +102,7 @@ enum sis190_registers { IntrStatus = 0x20, IntrMask = 0x24, IntrControl = 0x28, - IntrTimer = 0x2c, // unused (Interupt Timer) + IntrTimer = 0x2c, // unused (Interrupt Timer) PMControl = 0x30, // unused (Power Mgmt Control/Status) rsv2 = 0x34, // reserved ROMControl = 0x38, diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c index b36dd9a..c761ff7 100644 --- a/drivers/net/sk98lin/skgepnmi.c +++ b/drivers/net/sk98lin/skgepnmi.c @@ -356,7 +356,7 @@ int Level) /* Initialization level */ unsigned int PortMax; /* Number of ports */ unsigned int PortIndex; /* Current port index in loop */ SK_U16 Val16; /* Multiple purpose 16 bit variable */ - SK_U8 Val8; /* Mulitple purpose 8 bit variable */ + SK_U8 Val8; /* Multiple purpose 8 bit variable */ SK_EVPARA EventParam; /* Event struct for timer event */ SK_PNMI_VCT *pVctBackupData; diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c index b4e7502..3994289 100644 --- a/drivers/net/sk98lin/skxmac2.c +++ b/drivers/net/sk98lin/skxmac2.c @@ -3891,7 +3891,7 @@ int SkXmOverflowStatus( SK_AC *pAC, /* adapter context */ SK_IOC IoC, /* IO context */ unsigned int Port, /* Port Index (MAC_1 + n) */ -SK_U16 IStatus, /* Interupt Status from MAC */ +SK_U16 IStatus, /* Interrupt Status from MAC */ SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */ { SK_U64 Status; /* Overflow status */ @@ -4036,7 +4036,7 @@ int SkGmOverflowStatus( SK_AC *pAC, /* adapter context */ SK_IOC IoC, /* IO context */ unsigned int Port, /* Port Index (MAC_1 + n) */ -SK_U16 IStatus, /* Interupt Status from MAC */ +SK_U16 IStatus, /* Interrupt Status from MAC */ SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */ { SK_U64 Status; /* Overflow status */ diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c index 62b0132..889f987 100644 --- a/drivers/net/skfp/ess.c +++ b/drivers/net/skfp/ess.c @@ -598,7 +598,7 @@ static void ess_send_alc_req(struct s_smc *smc) req->cmd.sba_cmd = REQUEST_ALLOCATION ; /* - * set the parameter type and parameter lenght of all used + * set the parameter type and parameter length of all used * parameters */ diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/skfp/fplustm.c index a45205d..b27a895 100644 --- a/drivers/net/skfp/fplustm.c +++ b/drivers/net/skfp/fplustm.c @@ -398,7 +398,7 @@ static void copy_tx_mac(struct s_smc *smc, u_long td, struct fddi_mac *mac, /* u_long td; transmit descriptor */ /* struct fddi_mac *mac; mac frame pointer */ /* unsigned off; start address within buffer memory */ -/* int len ; lenght of the frame including the FC */ +/* int len ; length of the frame including the FC */ { int i ; u_int *p ; @@ -1262,8 +1262,8 @@ Function DOWNCALL/INTERN (SMT, fplustm.c) Para mode = 1 RX_ENABLE_ALLMULTI enable all multicasts 2 RX_DISABLE_ALLMULTI disable "enable all multicasts" - 3 RX_ENABLE_PROMISC enable promiscous - 4 RX_DISABLE_PROMISC disable promiscous + 3 RX_ENABLE_PROMISC enable promiscuous + 4 RX_DISABLE_PROMISC disable promiscuous 5 RX_ENABLE_NSA enable reception of NSA frames 6 RX_DISABLE_NSA disable reception of NSA frames diff --git a/drivers/net/skfp/h/fplustm.h b/drivers/net/skfp/h/fplustm.h index 98bbf65..586f055 100644 --- a/drivers/net/skfp/h/fplustm.h +++ b/drivers/net/skfp/h/fplustm.h @@ -237,8 +237,8 @@ struct s_smt_fp { */ #define RX_ENABLE_ALLMULTI 1 /* enable all multicasts */ #define RX_DISABLE_ALLMULTI 2 /* disable "enable all multicasts" */ -#define RX_ENABLE_PROMISC 3 /* enable promiscous */ -#define RX_DISABLE_PROMISC 4 /* disable promiscous */ +#define RX_ENABLE_PROMISC 3 /* enable promiscuous */ +#define RX_DISABLE_PROMISC 4 /* disable promiscuous */ #define RX_ENABLE_NSA 5 /* enable reception of NSA frames */ #define RX_DISABLE_NSA 6 /* disable reception of NSA frames */ diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h index 1ff5899..2976757 100644 --- a/drivers/net/skfp/h/smt.h +++ b/drivers/net/skfp/h/smt.h @@ -413,7 +413,7 @@ struct smt_p_reason { #define SMT_RDF_SUCCESS 0x00000003 /* success (PMF) */ #define SMT_RDF_BADSET 0x00000004 /* bad set count (PMF) */ #define SMT_RDF_ILLEGAL 0x00000005 /* read only (PMF) */ -#define SMT_RDF_NOPARAM 0x6 /* paramter not supported (PMF) */ +#define SMT_RDF_NOPARAM 0x6 /* parameter not supported (PMF) */ #define SMT_RDF_RANGE 0x8 /* out of range */ #define SMT_RDF_AUTHOR 0x9 /* not autohorized */ #define SMT_RDF_LENGTH 0x0a /* length error */ diff --git a/drivers/net/skfp/h/supern_2.h b/drivers/net/skfp/h/supern_2.h index 5ba0b83..1074f96 100644 --- a/drivers/net/skfp/h/supern_2.h +++ b/drivers/net/skfp/h/supern_2.h @@ -386,7 +386,7 @@ struct tx_queue { #define FM_MDISRCV (4<<8) /* disable receive function */ #define FM_MRES0 (5<<8) /* reserve */ #define FM_MLIMPROM (6<<8) /* limited-promiscuous mode */ -#define FM_MPROMISCOUS (7<<8) /* address detection : promiscous */ +#define FM_MPROMISCOUS (7<<8) /* address detection : promiscuous */ #define FM_SELSA 0x0800 /* select-short-address bit */ diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 76cc1d3..648b904 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -466,7 +466,7 @@ static inline void smc911x_rcv(struct net_device *dev) /* Align IP header to 32 bits * Note that the device is configured to add a 2 * byte padding to the packet start, so we really - * want to write to the orignal data pointer */ + * want to write to the original data pointer */ data = skb->data; skb_reserve(skb, 2); skb_put(skb,pkt_len-4); diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index bccae7e..7a7f5cd 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -1826,7 +1826,7 @@ spider_net_enable_card(struct spider_net_card *card) spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE); - /* set chain tail adress for RX chains and + /* set chain tail address for RX chains and * enable DMA */ spider_net_enable_rxchtails(card); spider_net_enable_rxdmac(card); diff --git a/drivers/net/sunbmac.h b/drivers/net/sunbmac.h index b563d3c..681442b 100644 --- a/drivers/net/sunbmac.h +++ b/drivers/net/sunbmac.h @@ -185,7 +185,7 @@ #define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */ #define BIGMAC_RXCFG_FIFO 0x0000000e /* Default rx fthresh... */ #define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */ -#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscous mode */ +#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */ #define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */ #define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */ #define BIGMAC_RXCFG_ME 0x00000200 /* Receive packets addressed to me */ diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 6887214..097a065 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -780,7 +780,7 @@ static int gem_rx(struct gem *gp, int work_to_do) break; /* When writing back RX descriptor, GEM writes status - * then buffer address, possibly in seperate transactions. + * then buffer address, possibly in separate transactions. * If we don't wait for the chip to write both, we could * post a new buffer to this descriptor then have GEM spam * on the buffer address. We sync on the RX completion diff --git a/drivers/net/sunhme.h b/drivers/net/sunhme.h index 90f446d..68bf4e1 100644 --- a/drivers/net/sunhme.h +++ b/drivers/net/sunhme.h @@ -223,7 +223,7 @@ /* BigMac receive config register. */ #define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */ #define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */ -#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscous mode */ +#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */ #define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */ #define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */ #define BIGMAC_RXCFG_REJME 0x00000200 /* Reject packets addressed to me */ diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index d887c05..0fbf96d 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -136,7 +136,7 @@ struct tc35815_regs { #define DMA_RxAlign_2 0x00800000 #define DMA_RxAlign_3 0x00c00000 #define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */ -#define DMA_IntMask 0x00040000 /* 1:Interupt mask */ +#define DMA_IntMask 0x00040000 /* 1:Interrupt mask */ #define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */ #define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */ #define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */ @@ -281,7 +281,7 @@ struct tc35815_regs { #define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */ /* MD_CA bit asign --------------------------------------------------------- */ -#define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */ +#define MD_CA_PreSup 0x00001000 /* 1:Preamble Suppress */ #define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */ #define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */ diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c index 21230c9..3ed1973 100644 --- a/drivers/net/tehuti.c +++ b/drivers/net/tehuti.c @@ -276,7 +276,7 @@ static irqreturn_t bdx_isr_napi(int irq, void *dev) * currently intrs are disabled (since we read ISR), * and we have failed to register next poll. * so we read the regs to trigger chip - * and allow further interupts. */ + * and allow further interrupts. */ READ_REG(priv, regTXF_WPTR_0); READ_REG(priv, regRXD_WPTR_0); } diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h index efd170f..992efa6 100644 --- a/drivers/net/tehuti.h +++ b/drivers/net/tehuti.h @@ -510,7 +510,7 @@ struct txd_desc { #define GMAC_RX_FILTER_ACRC 0x0010 /* accept crc error */ #define GMAC_RX_FILTER_AM 0x0008 /* accept multicast */ #define GMAC_RX_FILTER_AB 0x0004 /* accept broadcast */ -#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscous mode */ +#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscuous mode */ #define MAX_FRAME_AB_VAL 0x3fff /* 13:0 */ diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c index 5d31519..9d7a0c9 100644 --- a/drivers/net/tokenring/3c359.c +++ b/drivers/net/tokenring/3c359.c @@ -75,7 +75,7 @@ static char version[] __devinitdata = MODULE_AUTHOR("Mike Phillips ") ; MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ; -/* Module paramters */ +/* Module parameters */ /* Ring Speed 0,4,16 * 0 = Autosense diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c index 47d84cd..21c4f3c 100644 --- a/drivers/net/tokenring/lanstreamer.c +++ b/drivers/net/tokenring/lanstreamer.c @@ -170,7 +170,7 @@ static char *open_min_error[] = { "Monitor Contention failer for RPL", "FDX Protocol Error" }; -/* Module paramters */ +/* Module parameters */ /* Ring Speed 0,4,16 * 0 = Autosense diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c index 74c1f0f..b1178f1 100644 --- a/drivers/net/tokenring/olympic.c +++ b/drivers/net/tokenring/olympic.c @@ -132,7 +132,7 @@ static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost", "Reserved", "Reserved", "No Monitor Detected for RPL", "Monitor Contention failer for RPL", "FDX Protocol Error"}; -/* Module paramters */ +/* Module parameters */ MODULE_AUTHOR("Mike Phillips ") ; MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ; diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index 93da3a3..4238a61 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -2426,7 +2426,7 @@ static irqreturn_t smctr_interrupt(int irq, void *dev_id) break ; /* Type 0x0E - TRC Initialization Sequence Interrupt - * Subtype -- 00-FF Initializatin sequence complete + * Subtype -- 00-FF Initialization sequence complete */ case ISB_IMC_TRC_INTRNL_TST_STATUS: tp->status = INITIALIZED; @@ -3055,8 +3055,8 @@ static int smctr_load_node_addr(struct net_device *dev) * disabled.!? * * NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask - * has any multi-cast or promiscous bits set, the receive_mask needs to - * be changed to clear the multi-cast or promiscous mode bits, the lobe_test + * has any multi-cast or promiscuous bits set, the receive_mask needs to + * be changed to clear the multi-cast or promiscuous mode bits, the lobe_test * run, and then the receive mask set back to its original value if the test * is successful. */ diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index d5fa36d..b15435d 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -48,7 +48,7 @@ * 25-Sep-99 AF Uped TPL_NUM from 3 to 9 * Removed extraneous 'No free TPL' * 22-Dec-99 AF Added Madge PCI Mk2 support and generalized - * parts of the initilization procedure. + * parts of the initialization procedure. * 30-Dec-99 AF Turned tms380tr into a library ala 8390. * Madge support is provided in the abyss module * Generic PCI support is in the tmspci module. diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h index 7daf74e..1cbb8b8 100644 --- a/drivers/net/tokenring/tms380tr.h +++ b/drivers/net/tokenring/tms380tr.h @@ -441,7 +441,7 @@ typedef struct { #define PASS_FIRST_BUF_ONLY 0x0100 /* Passes only first internal buffer * of each received frame; FrameSize * of RPLs must contain internal - * BUFFER_SIZE bits for promiscous mode. + * BUFFER_SIZE bits for promiscuous mode. */ #define ENABLE_FULL_DUPLEX_SELECTION 0x2000 /* Enable the use of full-duplex diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c index 70befe3..5dad012 100644 --- a/drivers/net/tulip/xircom_cb.c +++ b/drivers/net/tulip/xircom_cb.c @@ -646,7 +646,7 @@ static void setup_descriptors(struct xircom_private *card) } wmb(); - /* wite the transmit descriptor ring to the card */ + /* write the transmit descriptor ring to the card */ address = (unsigned long) card->tx_dma_handle; val =cpu_to_le32(address); outl(val, card->io_port + CSR4); /* xmit descr list address */ diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 1f76446..fc9eada 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -142,7 +142,7 @@ add_multi(u32* filter, const u8* addr) filter[bit_nr >> 5] |= 1 << (bit_nr & 31); } -/** Remove the specified Ethernet addres from this multicast filter. */ +/** Remove the specified Ethernet address from this multicast filter. */ static void del_multi(u32* filter, const u8* addr) { @@ -399,7 +399,7 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv, * - the packet is addressed to us. * - the packet is broadcast. * - the packet is multicast and - * - we are multicast promiscous. + * - we are multicast promiscuous. * - we belong to the multicast group. */ skb_copy_from_linear_data(skb, addr, min_t(size_t, sizeof addr, diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 9a9622c..f8d319b 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -7,7 +7,7 @@ * * Limitation: * Can only get/set setttings of the first queue. - * Need to re-open the interface manually after changing some paramters. + * Need to re-open the interface manually after changing some parameters. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c index df884f0..7c0d4a8 100644 --- a/drivers/net/ucc_geth_mii.c +++ b/drivers/net/ucc_geth_mii.c @@ -63,11 +63,11 @@ int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) { struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv; - /* Setting up the MII Mangement Address Register */ + /* Setting up the MII Management Address Register */ out_be32(®s->miimadd, (mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum); - /* Setting up the MII Mangement Control Register with the value */ + /* Setting up the MII Management Control Register with the value */ out_be32(®s->miimcon, value); /* Wait till MII management write is complete */ @@ -85,7 +85,7 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum) struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv; u16 value; - /* Setting up the MII Mangement Address Register */ + /* Setting up the MII Management Address Register */ out_be32(®s->miimadd, (mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum); diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c index d347d59..d14e667 100644 --- a/drivers/net/wan/cycx_drv.c +++ b/drivers/net/wan/cycx_drv.c @@ -322,7 +322,7 @@ static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len) void __iomem *pt_boot_cmd = addr + CMD_OFFSET; u32 i; - /* boot buffer lenght */ + /* boot buffer length */ writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); writew(GEN_DEFPAR, pt_boot_cmd); @@ -353,7 +353,7 @@ static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len) void __iomem *pt_boot_cmd = addr + CMD_OFFSET; u32 i; - /* boot buffer lenght */ + /* boot buffer length */ writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); writew(GEN_DEFPAR, pt_boot_cmd); diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c index 2e8b5c2..74f87df 100644 --- a/drivers/net/wan/sbni.c +++ b/drivers/net/wan/sbni.c @@ -1472,7 +1472,7 @@ sbni_get_stats( struct net_device *dev ) static void set_multicast_list( struct net_device *dev ) { - return; /* sbni always operate in promiscuos mode */ + return; /* sbni always operate in promiscuous mode */ } diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 059ce3f..60dfdd9 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -3278,7 +3278,7 @@ static void atmel_smooth_qual(struct atmel_private *priv) priv->wstats.qual.updated &= ~IW_QUAL_QUAL_INVALID; } -/* deals with incoming managment frames. */ +/* deals with incoming management frames. */ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u16 frame_len, u8 rssi) diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h index a40d1af..edf7d8f 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h @@ -28,7 +28,7 @@ struct bcm43xx_dfsentry { struct bcm43xx_xmitstatus *xmitstatus_buffer; int xmitstatus_ptr; int xmitstatus_cnt; - /* We need a seperate buffer while printing to avoid + /* We need a separate buffer while printing to avoid * concurrency issues. (New xmitstatus can arrive * while we are printing). */ diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 54f44e5..e24382f 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -1144,7 +1144,7 @@ static void ipw_led_shutdown(struct ipw_priv *priv) /* * The following adds a new attribute to the sysfs representation * of this device driver (i.e. a new file in /sys/bus/pci/drivers/ipw/) - * used for controling the debug level. + * used for controlling the debug level. * * See the level definitions in ipw for details. */ diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 891f90d..e242647 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -4051,7 +4051,7 @@ static int iwl4965_tx_status_reply_compressed_ba(struct iwl_priv *priv, agg->wait_for_ba = 0; IWL_DEBUG_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->ba_seq_ctl); sh = agg->start_idx - SEQ_TO_INDEX(ba_seq_ctl>>4); - if (sh < 0) /* tbw something is wrong with indeces */ + if (sh < 0) /* tbw something is wrong with indices */ sh += 0x100; /* don't use 64 bits for now */ diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index be5cfd8..31ee4f6 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1120,7 +1120,7 @@ int libertas_set_mac_packet_filter(wlan_private * priv) * @param cmd_action command action: GET or SET * @param wait_option wait option: wait response or not * @param cmd_oid cmd oid: treated as sub command - * @param pdata_buf A pointer to informaion buffer + * @param pdata_buf A pointer to information buffer * @return 0 or -1 */ int libertas_prepare_and_send_command(wlan_private * priv, @@ -1606,7 +1606,7 @@ static void cleanup_cmdnode(struct cmd_ctrl_node *ptempnode) * @param ptempnode A pointer to cmd_ctrl_node structure * @param cmd_oid cmd oid: treated as sub command * @param wait_option wait option: wait response or not - * @param pdata_buf A pointer to informaion buffer + * @param pdata_buf A pointer to information buffer * @return 0 or -1 */ void libertas_set_cmd_ctrl_node(wlan_private * priv, diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index ad1e67d..537b36c 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -443,7 +443,7 @@ wlan_scan_setup_scan_config(wlan_private * priv, ptlvpos = pscancfgout->tlvbuffer; /* - * Set the initial scan paramters for progressive scanning. If a specific + * Set the initial scan parameters for progressive scanning. If a specific * BSSID or SSID is used, the number of channels in the scan command * will be increased to the absolute maximum */ @@ -1679,7 +1679,7 @@ int libertas_get_scan(struct net_device *dev, struct iw_request_info *info, * * Called from libertas_prepare_and_send_command() in cmd.c * - * Sends a fixed lenght data part (specifying the BSS type and BSSID filters) + * Sends a fixed length data part (specifying the BSS type and BSSID filters) * as well as a variable number/length of TLVs to the firmware. * * @param priv A pointer to wlan_private structure diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c index d2fa079..c4b649e 100644 --- a/drivers/net/wireless/netwave_cs.c +++ b/drivers/net/wireless/netwave_cs.c @@ -1408,7 +1408,7 @@ static void set_multicast_list(struct net_device *dev) /* Multicast Mode */ rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast; } else if (dev->flags & IFF_PROMISC) { - /* Promiscous mode */ + /* Promiscuous mode */ rcvMode = rxConfRxEna + rxConfPro + rxConfAMP + rxConfBcast; } else { /* Normal mode */ diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index 4720fb2..703a4cf 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -108,7 +108,7 @@ struct orinoco_private { int scan_inprogress; /* Scan pending... */ u32 scan_mode; /* Type of scan done */ char * scan_result; /* Result of previous scan */ - int scan_len; /* Lenght of result */ + int scan_len; /* Length of result */ }; #ifdef ORINOCO_DEBUG diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index f87fe10..24f9066 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -129,7 +129,7 @@ static void ray_reset(struct net_device *dev); static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len); static void verify_dl_startup(u_long); -/* Prototypes for interrpt time functions **********************************/ +/* Prototypes for interrupt time functions **********************************/ static irqreturn_t ray_interrupt (int reg, void *dev_id); static void clear_interrupt(ray_dev_t *local); static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs, diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index 8384212..fe9011d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -230,7 +230,7 @@ static inline u8 rt2x00_get_field8(const u8 reg, * corresponds with the TX register format for the current device. * 4 - plcp, 802.11b rates are device specific, * 802.11g rates are set according to the ieee802.11a-1999 p.14. - * The bit to enable preamble is set in a seperate define. + * The bit to enable preamble is set in a separate define. */ #define DEV_RATE FIELD32(0x000007ff) #define DEV_PREAMBLE FIELD32(0x00000800) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 2681abe..b76881f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -135,13 +135,13 @@ static inline int rt2x00usb_vendor_request_sw(const struct rt2x00_dev * kmalloc for correct handling inside the kernel USB layer. */ static inline int rt2x00usb_eeprom_read(const struct rt2x00_dev *rt2x00dev, - __le16 *eeprom, const u16 lenght) + __le16 *eeprom, const u16 length) { - int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16)); + int timeout = REGISTER_TIMEOUT * (length / sizeof(u16)); return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ, USB_VENDOR_REQUEST_IN, 0x0000, - 0x0000, eeprom, lenght, timeout); + 0x0000, eeprom, length, timeout); } /* diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index c0671c2..d1468a1 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -833,7 +833,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, /* * Write firmware to device. - * We setup a seperate cache for this action, + * We setup a separate cache for this action, * since we are going to write larger chunks of data * then normally used cache size. */ diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 577c647..5d28105 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -159,7 +159,7 @@ psa_read(struct net_device * dev, /*------------------------------------------------------------------*/ /* - * Write the Paramter Storage Area to the WaveLAN card's memory + * Write the Parameter Storage Area to the WaveLAN card's memory */ static void psa_write(struct net_device * dev, diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h index 8009b70..301315a 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.h +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -620,8 +620,8 @@ enum { #define E2P_PWR_INT_GUARD 8 #define E2P_CHANNEL_COUNT 14 -/* If you compare this addresses with the ZYDAS orignal driver, please notify - * that we use word mapping for the EEPROM. +/* If you compare these addresses with the ZYDAS original driver, + * please notice that we use word mapping for the EEPROM. */ /* diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c index 87f002a..cb6e978 100644 --- a/drivers/net/yellowfin.c +++ b/drivers/net/yellowfin.c @@ -533,7 +533,7 @@ static int __devinit read_eeprom(void __iomem *ioaddr, int location) return ioread8(ioaddr + EERead); } -/* MII Managemen Data I/O accesses. +/* MII Management Data I/O accesses. These routines assume the MDIO controller is idle, and do not exit until the command is finished. */ -- 1.5.3.7.949.g2221a6