[PATCH] sbc85xx: remove PCI exclude device for sbc8548/sbc8560

[Paul Gortmaker <paul.gortmaker@windriver.com>]

The PCI exclude device for the sbc85xx boards was only filtering out
the PHB and nothing else.  This functionality is no longer required
at a board specific level -- it is handled as a more global quirk now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
 arch/powerpc/platforms/85xx/sbc8548.c |   13 -------------
 arch/powerpc/platforms/85xx/sbc8560.c |   13 -------------
 2 files changed, 0 insertions(+), 26 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index f3ab271..de27b57 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -49,17 +49,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
-#ifdef CONFIG_PCI
-static int sbc8548_exclude_device(struct pci_controller *hose,
-				  u_char bus, u_char devfn)
-{
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-#endif
-
 static void __init sbc8548_pic_init(void)
 {
 	struct mpic *mpic;
@@ -114,8 +103,6 @@ static void __init sbc8548_setup_arch(void)
 				fsl_add_bridge(np, 0);
 		}
 	}
-
-	ppc_md.pci_exclude_device = sbc8548_exclude_device;
 #endif
 }
 
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 6aef38b..2030e87 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -37,17 +37,6 @@
 #include <sysdev/cpm2_pic.h>
 #endif
 
-#ifdef CONFIG_PCI
-static int sbc8560_exclude_device(struct pci_controller *hose,
-				   u_char bus, u_char devfn)
-{
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-#endif /* CONFIG_PCI */
-
 #ifdef CONFIG_CPM2
 
 static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
@@ -199,8 +188,6 @@ static void __init sbc8560_setup_arch(void)
 #ifdef CONFIG_PCI
 	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
 		fsl_add_bridge(np, 1);
-
-	ppc_md.pci_exclude_device = sbc8560_exclude_device;
 #endif
 }
 
-- 
1.5.0.rc1.gf4b6c