* [PATCH 0/3] Powerpc support for SBC834x board
@ 2008-01-09 5:49 Paul Gortmaker
[not found] ` <ac667c5b2e8acb0f92d31b8e3b590432bb939df9.1199850992.git.paul.gortmaker@windriver.com>
0 siblings, 1 reply; 7+ messages in thread
From: Paul Gortmaker @ 2008-01-09 5:49 UTC (permalink / raw)
To: linuxppc-dev
The following three patches add support for the Wind River SBC834x board
into arch/powerpc. The support is primarily based on the existing Fsl
MPC834x_MDS board support.
1) Add support for Wind River SBC834x boards
b/arch/powerpc/platforms/83xx/Kconfig | 9 ++
b/arch/powerpc/platforms/83xx/Makefile | 1
b/arch/powerpc/platforms/83xx/sbc834x.c | 117 +++++++++++++++++++++++++++++++-
3 files changed, 125 insertions(+), 2 deletions(-)
2) Add device tree source (v1) for Wind River SBC834x board
b/arch/powerpc/boot/dts/sbc8349.dts | 248 +++++++++++++++++++++++++++++++++++-
1 file changed, 247 insertions(+), 1 deletion(-)
3) Add default config file for Wind River SBC8349 board
b/arch/powerpc/configs/sbc834x_defconfig | 801 ++++++++++++++++++++++++++++++-
1 file changed, 800 insertions(+), 1 deletion(-)
I've tested this with u-boot 1.3.1 + the three recent minor sbc834x u-boot
patches I'd put out plus the latest dtc from git, and it all seems happy.
Paul.
^ permalink raw reply [flat|nested] 7+ messages in thread[parent not found: <ac667c5b2e8acb0f92d31b8e3b590432bb939df9.1199850992.git.paul.gortmaker@windriver.com>]
* [PATCH 1/3] sbc834x: Add support for Wind River SBC834x boards [not found] ` <ac667c5b2e8acb0f92d31b8e3b590432bb939df9.1199850992.git.paul.gortmaker@windriver.com> @ 2008-01-09 5:49 ` Paul Gortmaker 2008-01-09 7:01 ` Stephen Rothwell [not found] ` <b9cda8aa586eba852f0763db2347d545a5b31be6.1199850992.git.paul.gortmaker@windriver.com> [not found] ` <01993202680f1b46bad03b1836e730e297d353fb.1199850992.git.paul.gortmaker@windriver.com> 2 siblings, 1 reply; 7+ messages in thread From: Paul Gortmaker @ 2008-01-09 5:49 UTC (permalink / raw) To: linuxppc-dev; +Cc: Paul Gortmaker This adds the basic support for the Wind River SBC834x boards. The SBC8349 is more common, although it should work on the SBC8347 board as well. Support is heavily based on the existing MPC834x_MDS code. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> --- arch/powerpc/platforms/83xx/Kconfig | 9 ++- arch/powerpc/platforms/83xx/Makefile | 1 + arch/powerpc/platforms/83xx/sbc834x.c | 116 +++++++++++++++++++++++++++++++++ 3 files changed, 125 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 2430ac8..782bff0 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -55,6 +55,13 @@ config MPC837x_MDS select DEFAULT_UIMAGE help This option enables support for the MPC837x MDS Processor Board. + +config SBC834x + bool "Wind River SBC834x" + select DEFAULT_UIMAGE + help + This option enables support for the Wind River SBC834x board. + endchoice config PPC_MPC831x @@ -73,7 +80,7 @@ config MPC834x bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC834x_MDS || MPC834x_ITX + default y if MPC834x_MDS || MPC834x_ITX || SBC834x config PPC_MPC836x bool diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index df46629..3a35242 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o obj-$(CONFIG_MPC837x_MDS) += mpc837x_mds.o +obj-$(CONFIG_SBC834x) += sbc834x.o diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c new file mode 100644 index 0000000..b448123 --- /dev/null +++ b/arch/powerpc/platforms/83xx/sbc834x.c @@ -0,0 +1,116 @@ +/* + * arch/powerpc/platforms/83xx/sbc834x.c + * + * Wind River SBC834x board specific routines + * + * By Paul Gortmaker (see MAINTAINERS for contact information) + * + * Based largely on the mpc834x_mds.c support by Kumar Gala. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/of_platform.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> + +#include "mpc83xx.h" + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init sbc834x_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("sbc834x_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") + mpc83xx_add_bridge(np); +#endif + +} + +static void __init sbc834x_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +static struct of_device_id sbc834x_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + {}, +}; + +static int __init sbc834x_declare_of_platform_devices(void) +{ + if (!machine_is(sbc834x)) + return 0; + + of_platform_bus_probe(NULL, sbc834x_ids, NULL); + return 0; +} +device_initcall(sbc834x_declare_of_platform_devices); + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init sbc834x_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "SBC834x"); +} + +define_machine(sbc834x) { + .name = "SBC834x", + .probe = sbc834x_probe, + .setup_arch = sbc834x_setup_arch, + .init_IRQ = sbc834x_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- 1.5.0.rc1.gf4b6c ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] sbc834x: Add support for Wind River SBC834x boards 2008-01-09 5:49 ` [PATCH 1/3] sbc834x: Add support for Wind River SBC834x boards Paul Gortmaker @ 2008-01-09 7:01 ` Stephen Rothwell 2008-01-15 14:13 ` Kumar Gala 0 siblings, 1 reply; 7+ messages in thread From: Stephen Rothwell @ 2008-01-09 7:01 UTC (permalink / raw) To: Paul Gortmaker; +Cc: linuxppc-dev [-- Attachment #1: Type: text/plain, Size: 975 bytes --] Hi Paul, On Wed, 9 Jan 2008 00:49:30 -0500 Paul Gortmaker <paul.gortmaker@windriver.com> wrote: > > +static void __init sbc834x_init_IRQ(void) > +{ > + struct device_node *np; > + > + np = of_find_node_by_type(NULL, "ipic"); > + if (!np) > + return; > + > + ipic_init(np, 0); > + > + /* Initialize the default interrupt mapping priorities, > + * in case the boot rom changed something on us. > + */ > + ipic_set_default_priority(); > +} This needs an of_node_put(np) somewhere. > +static struct of_device_id sbc834x_ids[] = { __initdata > +static int __init sbc834x_declare_of_platform_devices(void) > +{ > + if (!machine_is(sbc834x)) > + return 0; > + > + of_platform_bus_probe(NULL, sbc834x_ids, NULL); > + return 0; > +} > +device_initcall(sbc834x_declare_of_platform_devices); machine_device_initcall(sbc834x, ... -- Cheers, Stephen Rothwell sfr@canb.auug.org.au http://www.canb.auug.org.au/~sfr/ [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] sbc834x: Add support for Wind River SBC834x boards 2008-01-09 7:01 ` Stephen Rothwell @ 2008-01-15 14:13 ` Kumar Gala 0 siblings, 0 replies; 7+ messages in thread From: Kumar Gala @ 2008-01-15 14:13 UTC (permalink / raw) To: Stephen Rothwell; +Cc: Paul Gortmaker, linuxppc-dev On Jan 9, 2008, at 1:01 AM, Stephen Rothwell wrote: > Hi Paul, > > On Wed, 9 Jan 2008 00:49:30 -0500 Paul Gortmaker <paul.gortmaker@windriver.com > > wrote: >> >> +static void __init sbc834x_init_IRQ(void) >> +{ >> + struct device_node *np; >> + >> + np = of_find_node_by_type(NULL, "ipic"); >> + if (!np) >> + return; >> + >> + ipic_init(np, 0); >> + >> + /* Initialize the default interrupt mapping priorities, >> + * in case the boot rom changed something on us. >> + */ >> + ipic_set_default_priority(); >> +} > > This needs an of_node_put(np) somewhere. > >> +static struct of_device_id sbc834x_ids[] = { > > __initdata > >> +static int __init sbc834x_declare_of_platform_devices(void) >> +{ >> + if (!machine_is(sbc834x)) >> + return 0; >> + >> + of_platform_bus_probe(NULL, sbc834x_ids, NULL); >> + return 0; >> +} >> +device_initcall(sbc834x_declare_of_platform_devices); > > machine_device_initcall(sbc834x, ... Any updates here? While David's .dts comments are probably valid I'm not going to make you have to deal with them to get into the tree. We need to fix all the other 83xx platforms w/respect to those things. - k ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <b9cda8aa586eba852f0763db2347d545a5b31be6.1199850992.git.paul.gortmaker@windriver.com>]
* [PATCH 2/3] sbc834x: Add device tree source for Wind River SBC834x board. [not found] ` <b9cda8aa586eba852f0763db2347d545a5b31be6.1199850992.git.paul.gortmaker@windriver.com> @ 2008-01-09 5:49 ` Paul Gortmaker 2008-01-10 2:06 ` David Gibson 1 sibling, 0 replies; 7+ messages in thread From: Paul Gortmaker @ 2008-01-09 5:49 UTC (permalink / raw) To: linuxppc-dev; +Cc: Paul Gortmaker This adds the device tree source for the Wind River SBC834x board. It is based on the MPC834x_MDS DTS, with the biggest difference being the lack of BCSR and the PCI2 that the MDS gets via the PIB. That, and this file is also dts-v1 format. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> --- arch/powerpc/boot/dts/sbc8349.dts | 247 +++++++++++++++++++++++++++++++++++++ 1 files changed, 247 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts new file mode 100644 index 0000000..dd5a0f2 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -0,0 +1,247 @@ +/* + * SBC8349E Device Tree Source + * + * Copyright 2007 Wind River Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * -based largely on the Freescale MPC834x_MDS dts. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "SBC8349E"; + compatible = "SBC834xE"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0xe 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0xf 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <0x7000 0x1000>; + interrupts = <0x10 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + /* phy type (ULPI or SERIAL) are only types supported for MPH */ + /* port = 0 or 1 */ + usb@22000 { + device_type = "usb"; + compatible = "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <0x1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <0x27 0x8>; + phy_type = "ulpi"; + port1; + }; + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <0x26 0x8>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy0: ethernet-phy@19 { + interrupt-parent = <&ipic>; + interrupts = <0x14 0x8>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1a { + interrupt-parent = <&ipic>; + interrupts = <0x15 0x8>; + reg = <0x1a>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>; + interrupt-parent = <&ipic>; + phy-handle = <&phy0>; + linux,network-index = <0>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>; + interrupt-parent = <&ipic>; + phy-handle = <&phy1>; + linux,network-index = <1>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0xa 0x8>; + interrupt-parent = <&ipic>; + }; + + /* May need to remove if on a part without crypto engine */ + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <0xb 0x8>; + interrupt-parent = <&ipic>; + num-channels = <4>; + channel-fifo-len = <0x18>; + exec-units-mask = <0x0000007e>; + /* desc mask is for rev2.0, + * we need runtime fixup for >2.0 */ + descriptor-types-mask = <0x01010ebf>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + }; + + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0x8800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0x8800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0x8800 0x0 0x0 0x4 &ipic 0x17 0x8>; + + interrupt-parent = <&ipic>; + interrupts = <0x42 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; -- 1.5.0.rc1.gf4b6c ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 2/3] sbc834x: Add device tree source for Wind River SBC834x board. [not found] ` <b9cda8aa586eba852f0763db2347d545a5b31be6.1199850992.git.paul.gortmaker@windriver.com> 2008-01-09 5:49 ` [PATCH 2/3] sbc834x: Add device tree source for Wind River SBC834x board Paul Gortmaker @ 2008-01-10 2:06 ` David Gibson 1 sibling, 0 replies; 7+ messages in thread From: David Gibson @ 2008-01-10 2:06 UTC (permalink / raw) To: Paul Gortmaker; +Cc: linuxppc-dev On Wed, Jan 09, 2008 at 12:49:31AM -0500, Paul Gortmaker wrote: > This adds the device tree source for the Wind River SBC834x board. > It is based on the MPC834x_MDS DTS, with the biggest difference being > the lack of BCSR and the PCI2 that the MDS gets via the PIB. That, > and this file is also dts-v1 format. > > Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> > --- > arch/powerpc/boot/dts/sbc8349.dts | 247 +++++++++++++++++++++++++++++++++++++ > 1 files changed, 247 insertions(+), 0 deletions(-) > > diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts [snip] > + wdt@200 { > + device_type = "watchdog"; > + compatible = "mpc83xx_wdt"; Grah! Hasn't someone fixed this so that the driver doesn't need the crap device_type? [snip] > + spi@7000 { > + device_type = "spi"; > + compatible = "fsl_spi"; And again here. [snip] > + usb@22000 { > + device_type = "usb"; > + compatible = "fsl-usb2-mph"; And here. [snip > + /* May need to remove if on a part without crypto engine */ > + crypto@30000 { > + device_type = "crypto"; > + model = "SEC2"; > + compatible = "talitos"; I'm almost certain this one was fixed, hasn't it been merged yet? [snip] > + ipic: pic@700 { By generic names best practice this should be "interrupt-controller@700", although that's probably not your error. -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <01993202680f1b46bad03b1836e730e297d353fb.1199850992.git.paul.gortmaker@windriver.com>]
* [PATCH 3/3] sbc834x: Add default config file for Wind River SBC8349 board [not found] ` <01993202680f1b46bad03b1836e730e297d353fb.1199850992.git.paul.gortmaker@windriver.com> @ 2008-01-09 5:49 ` Paul Gortmaker 0 siblings, 0 replies; 7+ messages in thread From: Paul Gortmaker @ 2008-01-09 5:49 UTC (permalink / raw) To: linuxppc-dev; +Cc: Paul Gortmaker Default config file for SBC8349 board, suitable for use as with NFS as a root file system and gianfar as NFS root device. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> --- arch/powerpc/configs/sbc834x_defconfig | 800 ++++++++++++++++++++++++++++++++ 1 files changed, 800 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/configs/sbc834x_defconfig b/arch/powerpc/configs/sbc834x_defconfig new file mode 100644 index 0000000..ab48ccc --- /dev/null +++ b/arch/powerpc/configs/sbc834x_defconfig @@ -0,0 +1,800 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Tue Jan 8 19:48:27 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_83xx=y +CONFIG_PPC_FPU=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +# CONFIG_PPC_MULTIPLATFORM is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_MPC8313_RDB is not set +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC832x_RDB is not set +# CONFIG_MPC834x_MDS is not set +# CONFIG_MPC834x_ITX is not set +# CONFIG_MPC836x_MDS is not set +# CONFIG_MPC837x_MDS is not set +CONFIG_SBC834x=y +CONFIG_MPC834x=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_HIBERNATION_UP_POSSIBLE=y +CONFIG_SECCOMP=y +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_BROADCOM_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_GIANFAR=y +# CONFIG_GFAR_NAPI is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_PPC_CLOCK is not set -- 1.5.0.rc1.gf4b6c ^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2008-01-15 14:14 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-01-09 5:49 [PATCH 0/3] Powerpc support for SBC834x board Paul Gortmaker
[not found] ` <ac667c5b2e8acb0f92d31b8e3b590432bb939df9.1199850992.git.paul.gortmaker@windriver.com>
2008-01-09 5:49 ` [PATCH 1/3] sbc834x: Add support for Wind River SBC834x boards Paul Gortmaker
2008-01-09 7:01 ` Stephen Rothwell
2008-01-15 14:13 ` Kumar Gala
[not found] ` <b9cda8aa586eba852f0763db2347d545a5b31be6.1199850992.git.paul.gortmaker@windriver.com>
2008-01-09 5:49 ` [PATCH 2/3] sbc834x: Add device tree source for Wind River SBC834x board Paul Gortmaker
2008-01-10 2:06 ` David Gibson
[not found] ` <01993202680f1b46bad03b1836e730e297d353fb.1199850992.git.paul.gortmaker@windriver.com>
2008-01-09 5:49 ` [PATCH 3/3] sbc834x: Add default config file for Wind River SBC8349 board Paul Gortmaker
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).